Find Verified Copper Valves Suppliers, Manufacturers and Wholesalers

Cu:6%~30% Size:0-10mm powder or lump Trail order: 50 MT~300 MT Quantity: 500mt~1000 per month after first trail order Inspection: SGS/AHK/Alex S/CCIC Destination: Zhengzhou Discharge port: Qingdao or Shanghai Pack: in brand-new jumbo bag or in bulk Payment term: irrevocable L/C at sight Price term: please quote us at FOB basis, CNF Qingdao or CPT Zhengzhou. In bulk or 1 ton jumbo bag into 20 feet containers.

Application: Copper clad steel wire has been widely used in fields of communication, electron, power and traffic engineering, Ground wire,, telephone, telegraph, and railway signal line, etc. Direction: Copper clad steel conductor is a kind of composite bimetal wire with copper facing which feature high intensity, high electric conductivity and high stability. Copper clad steel is available with either in two tempers-soft(A) and as drawn(H). International standard: ASTM B227-04; ASTM B452-1993, BS4087: 1989 Diameter: 0.102-1.83mm Conductivity: 15%, 18%, 21%, 30%, 40% Elongation(%)----Hard drawn(min.) 1.5%, Annealed(min.) 16%-25%

Consistent high quality Reliable and flexible supply from plants in all regions New product development and technical support Best Price Copper brass coated steel Wire copper wire for hose (1)Brass Plated Steel Wire for Hose Reinforcement, also called Rubber Hose Steel Wire, Brass Plated Steel Wire, Brass Coated Steel Wire, Copper Coated Steel Wire, Copper Plated Steel Wire. (2)Hose Wire ,is used as braided or spiral wrapped reinforcement for rubber and thermoplastic high pressure hoses. (3)Hose reinforcement wire enables high pressure hydraulic hose manufactures to produce braided hoses that meet the hightest performance and quality standards. (4)Besides the standard brass coated steel wires from 0.20 up to 0.50mm with tensile strengths up to 3500N/mm2 . (5)Hengxing constantly develops new products as higher tensile strength wires,large diameter wires and solutions to improve hose impulse life,increase hose flexibility and increase adhesion performance. Best Price Copper brass coated steel Wire copper wire for hose Item: Copper Plated Hose Reinforcement wire Nominal diameter:0.2 mm normally size 0.2mm,0.25mm 0.3mm 0.35mm 0.4mm 0.5mm 0.6mm 0.65mm.... , of course other size no problem. Tensile strength:2150 Mpa/2450Mpa/2750Mpa/3050Mpa/3350Mpa (check with us please) Material: high carbon steel grade Surface: brass coated Hengxing company website: https://hengxingsteelwire.com/ http://en.hengxingchinese.com/ Email contact US:wmsale@hxkjgf.com

http://www.zmscable.com/powercables/963.html

http://www.zmscable.com/powercables/963.html

http://www.zmscable.com/powercables/963.html

Http://www.Zmscable.Com/powercables/963.Html -

Http://www.Xlpecable.Com/zmscable/cable_391_1.Html -

Model NO.: Armoured Power Cable Voltage: Low and Medium Voltage Cable Insulation Material: XLPE Material Shape: Round Wire Certification: ISO, CCC, CE, VDE, SABS Brand: Lonheo Numbers of Cores: 1-5 Class of Conductor: Stranded or Solid Sheath: PVC,PE,LSZH Trademark: lonheo Specification: IEC HS Code: 8544492100 Application: Construction, Underground, Industrial, Power Station Current: AC Cable Sheath Material: PVC Wire Core Material: Copper or Aluminium Model: Armoured Power Cable Rated Voltage: Lower and Medium Size: 1.5-1000mm2 Insulation: PVC,XLPE Armoured Layer: Steel Wire,Steel Tape Package: Steel Drum, Wooden Drum, Steel Wooden Drum Origin: China Product Description General Introduction Of PVC OR XLPE Insulation Armoured Power Cable  Specification 1. Our cables with XLPE or PVC (Polyvinyl Chloride) sheathing are manufactured in accordance with a wide range of IEC International Standards. 2. We supply a range of Qualified and hard-wearing Low to Medium Voltage armoured cables power cables for the supply of mains electricity. 3. These are available with Steel Wire Armour (SWA) Steel Tape Armour (STA) and Aluminium Wire Armour (AWA). 4. The armour provides additional protection, allowing it to be used directly in higher climatic and mechanical stress environments such as direct burial, outdoors, or underground. The armour also enables the cable to withstand higher pulling loads. Characteristic 1. Rated Voltage: 0.6/1KV,3.6/6KV~26/35KV 2. Numbers Of Cores: 1,2,,3,4,5,3+1,4+1,3+2 3. Nominal Cross-sectional Area: 1.5-1000, (As your requirement) 4. Conductor Material: 6mm2, Plain or Annealed Stranded Copper(CU) or Plain Aluminium(AL) 6mm2, Plain or Annealed Stranded Copper(CU) or Aluminium(AL)  5. Conductor Classification: The conductor have been divided into 2 classes. Class 1:Solid Conductor Class 2:Stranded Conductor 6. Insulation Material:XLPE or PVC XLPE: a crossed-linked polyethylene (XLPE) insulation provides thermal stability, good water resistant qualities and excellent electrical properties. PVC: polyvinyl chloride (PVC) is employed in order to create a protective barrier between the inner and outer layers of the cable. 7. Armoured: a steel or aluminium armour (SWA / AWA) provides mechanical protection to allow the cable to withstand the mechanical stresses to which it is exposed. Steel Armoured: Steel Wire Armoured-SWA, Steel Tape Armoured-STA Alumnium Armoured: AWA 8. Sheath Material(if have):PVC or PE or Polyolefin PVC: the constituent parts of the cable are held together in a black PVC sheath offering a further level of protection. Black sheaths can be carbon loaded for UV stability. Type & Structure:   1. Copper Core-CU 1.CU Core /PVC Insulation/SWA/PVC Sheath 2. CU Core /PVC Insulation/STA/PVC Sheath  3. CU Core /PVC Insulation/AWA/PVC Sheath  4.CU Core /XLPE Insulation/SWA/PVC Sheath or Polyolefin Sheath or LSZH Sheath 5. CU Core /XLPE Insulation/STA/PVC Sheath or Polyolefin Sheath or LSZH Sheath 6. CU Core /XLPE Insulation/AWA/PVC Sheath or Polyolefin Sheath or LSZH Sheath   2. Aluminium Core-AL  1.AL Core /PVC Insulation/SWA/PVC Sheath  2. AL Core /PVC Insulation/STA/PVC Sheath  3. AL Core /PVC Insulation/AWA/PVC Sheath  4.AL Core /XLPE Insulation/SWA/PVC Sheath or Polyolefin Sheath or LSZH Sheath 5. AL Core /XLPE Insulation/STA/PVC Sheath or Polyolefin Sheath or LSZH Sheath 6. AL Core /XLPE Insulation/AWA/PVC Sheath or Polyolefin Sheath or LSZH Sheath Size:1.5-1000mm2 Package:Steel Drum,Wooden Drum,Steel Wooden Drum Numbers of Cores:1-5

Hole range : 0.02 -10mm Case size : make as your requirement DAIS mainly supply PCD die , ND die , Mono die , TC die , Nano die . Guarantee quality , any quality problem , change new for you .

Copper coated wire /rubber hose wire 0.25mm Item: Copper Plated Hose Reinforcement wire Nominal diameter:0.2 mm normally size 0.2mm,0.25mm 0.3mm 0.35mm 0.4mm 0.5mm 0.6mm 0.65mm.... , of course other size no problem. Tensile strength:2150 Mpa/2450Mpa/2750Mpa/3050Mpa/3350Mpa (check with us please) Material: high carbon steel grade Surface: brass coated Copper coated wire /rubber hose wire 0.25mm (1)Brass Plated Steel Wire for Hose Reinforcement, also called Rubber Hose Steel Wire, Brass Plated Steel Wire, Brass Coated Steel Wire, Copper Coated Steel Wire, Copper Plated Steel Wire. (2)Hose Wire ,is used as braided or spiral wrapped reinforcement for rubber and thermoplastic high pressure hoses. (3)Hose reinforcement wire enables high pressure hydraulic hose manufactures to produce braided hoses that meet the hightest performance and quality standards. (4)Besides the standard brass coated steel wires from 0.20 up to 0.50mm with tensile strengths up to 3500N/mm2 . (5)Hengxing constantly develops new products as higher tensile strength wires,large diameter wires and solutions to improve hose impulse life,increase hose flexibility and increase adhesion performance.

Fr-4 copper clad laminated sheet uses glass fiber cloth as substrate material. After being immersed with epoxy resin and then baked into prepreg sheet, several prepreg sheets are then coated with copper foil on one side or both sides, and ccl is finally formed by hot pressing and curing. Fr-4 copper clad laminated sheet has excellent thermal stability and machinability, widely used in the manufacture of printed circuit board (pcb) for television sets, computers, communications equipment and other electronic products.

For proven quality of our sand resin casting parts , we have our own casting workshop which is outfitted with a resin sand casting line.With annual production capacity of 5000 ton.The casting line is mainly made up of one set of 1 ton intermediate frequency furnace, two set of 2 ton medium frequency furnace, one set of 4 ton holding furnace.It is dedicated to produce custom sand castings with maximum dimension of 2200*2200*1500 and maximum net weight of 4000kg. Additionally , we have a spectrographic lab and a mechanical lab.The labs are equipped with a series of testing equipment to ensure integrity of cast parts.Included are the spectrum analyzer, tension tester, magnetic defector detector, ultrasound flaw detector , hardness tester, and the foundry sand testing equipment.

Spherical disc butterfly valve is developed combined with the advantage of the butterfly valve and segment ball valve . The special disc butterfly valve can be used at inlet and outlet of the water pump,piping network system,recovery system,high water tank,sewage system and any other back flow preventing position to shut off or control the pipeline. Features 1.Designed with bidirectional sealing structure,the installation of the spherical disc butterfly valve will not be restricted by the direction of the fluid. 2.Since the metal sealed spherical disc butterfly valve is offered with self-sealing device,reliable sealing performance can be realized under the pressure from medium. 3.When the valve is installed on the reversed direction of the fluid ,powerful specific pressure of sealing can be obtained as valve seat and fluid formed annual contacting area. 4.The valve has long service life due to wear compensation. 5.The unique rotational structure ,as well as the sphere-conical sealing surface of the valve seat,makes for the self-cleaning function.The solid particles will be crushed when the bidirectional sphercial disc butterfly valve is opened or closed. Technical Specifications Size 2?~40? DN50~DN3000 PressureClass 150~Class 3 00 PN1.0~PN4.0 Body material WCB, CF8, CF8M, CF3, CF3M,etc. Sealing materialHard alloy Connection typeFlange or weld Operating typeWorm gear ,electric or pneumatic Applications Municipal engineering Circulating water system Water treatment system Fire extinguisher system Main Dimensions Flange Type: -

FREE-VALVEâ??s slurry valves are idea for bi-directional tight on-off service in abrasive slurry applications,the valve adopts the full-lined wear-resistant polyurethane injecting with the whole mold, and all media passing areas are wrapped in the polyurethane lined to achieve all-round wear-resistant protection,which provides excellent wear life with 100% positive shutoff of abrasive slurry,the Valves are designed for applications in mining. Features 1.Bi-directional flow,zero Leakage and shut-off, allowing valves to be installed in either direction. 2.The polyurethane lined has integral flange seals, eliminating flange gaskets when installing. 3.Resilient seats can be easily replaced after removing valve from the line. 4.Full round port allows for high flow capacity with minimum pressure drop. 5.Valve plate use wear - resistant stainless steel plate with various types of wear - resistant surface treatment. 6.Wafer type can also be made if necessary Technical Specification 1) Size Range: DN50~DN600 2) Pressure Range: PN6~PN16 3) Connection Type: Wafer,Flange 4) Seat and lined material:Polyurethane (PU) 5) Body material:WCB, CF8 ,CF8M 6) Pressure test:GB/T13927, MSS SP-81 7) Face to Face: GB/T12221, MSS SP-81 8) Operation Method:Handwheel, Lever, Bevel Gear, Chain Wheel, Pneumatic, Electric 10) Service temperature:-20�°C to 80�°C Applications FREE-VALVEâ??s slurry knife gate valve is designed and equipped to handle tough and abrasive shut off applications involving slurries, powders or granular substances as well as pulp stock, paper and recycled paper.Mining and minerals processing,Pulp and paper applications,Water & waste water,Sand and gravel plants,Tailing lines,Abrasive slurry materials