Type:QT3-20 Molding cycle:20-30s Power: 17kw Pallets size: 680*540*20mm Capacity: 3000/day for 400*200*200mm Worker:3-5 Mixer type: JW350 Belt conveyor: 7000*600mm nude in standard container
Cement plastering wall mortar spraying machine Product Description This machine is a kind of screw type with high pressure mortar spraying machine, advanced technology, operation and simple maintenance, no special training, can be proficient in operation. This machine is mainly used for building internal and external wall, cement mortar spraying and the outer wall insulation mortar spraying, refractory coating. Specification: Model KLW-180J Plaster Machine Voltage 380V Motor power 7.5kW Output pressure 5Mpa Delivery dist. 30m Max. aggregate size 6mm Water: cement:sand 0.7-1:1:3 Hopper volume 80L Delivery pipe 32mm Air compressor 0.36m3/h Weight 380kg Features: 1.KLW-180J plaster machine with removable hopper. 2. Multi-functional equipment with mixing, pumping, plastering device. 3. The spray speed,capacity, pressure are adjustable. 4. Small size, simple struction, easy operation and maintenance. Application: 1.The Plastering Machine is a new desinged multi-functional plastering equipment. 2.The Plastering Machine can be used for pumping and spraying ready-mixed mortar material, such as cement mortar, lime plaster, gypsum plaster, masonry mortar. 3.The Plastering Machine can be used for plastering fluid materials, such as thermal insulation material of walls, refractory material, fire-proof material, water-proof material, acoustic material, water soluble etc.
Description of high pressure grouting machine: WGP800/1200/200PI-D grout station is a combination of mixer, agitator and grout pump in one plant. It is mainly used in highway, railway, hydropower, construction, mining and other ground and underground construction. High speed vortex mixer ensures mix quickly and evenly. Water, cement or bentonite is quickly mixed into a homogeneous slurry. Then the mixed slurry was delivered to the agitator. Grout pump injects from the mixing drum (storage tank). This ensures a continuous mixing and grouting operations. The grouting plant is full hydraulic drive with diesel engine. Grouting pressure and displacement is step-less adjustable. Compact size and it is easy to operate. It also takes up a small space. Application 1. Civil engineering - dam, tunnel, subway, mine, soil nailing wall, curtain, anchor, cable trench and anchor grouting 2. Building structure - building and bridge repair, foundation reinforcement, slope support, soil compaction, terrg grouting 3. Engineering - underwater foundation, offshore platform, coast foundation grouting reinforcement 4. Mine application - roadway reinforcement, backfill, waterproof grouting 5. Geotechnical - deep well casing, monitor wells, well sealing and abandonment 6. Acted as a grouting plant in the Pipe Jacking Machine Wode Heavy Industry Co., Ltd., short name Wodetec, is a manufacturer specialized is R&D, manufacture and sale of grout equipment. Grout Equipment includes: grout plant, grout pump, grout mixer and agitator etc. Grout equipment is specially designed for continuous cement mixing and grouting in ground and underground engineering, such as highway, railway, hydropower, construction, mining. Now we have developed full series of grout plant and grout station, pump including piston type, plunger type and hose type. Mixer volume from 200L to 800L, agitator volume from 300L to 1200L, pump flow from 0 to 200L/min and pressure from 0 to 100 bar. Electric power and diesel power are available for customization. From years of experience Wode Heavy Industry Co., Ltd. has developed its own R&D and technician teams, which supports further development and customized service for clients.
WF5 clc foam concrete machine includes a screw conveyor, a concrete mixer, a foam generator and a hose pump, adopts advanced control technology, can exactly adjust the density of foam cement. The capacity is 5m3/h, which is specially designed for small project. It can put directly on the truck for working. Zhengzhou Wode Heavy Industry Co., Ltd. (short:"Wodetec") owns the advanced imported production equipment and complete production technology. Wodetec is a manufacturer specialized in R&D, manufacture and sale of foam concrete machine. We also have foaming agent and foam concrete pump. We have now developed full series of products with different of models. Max. output from 5-40m3 /h. Power , output, pressure and voltage are available options for customization.
WSZ3000E shotcrete machine is a universal concrete spraying machine for the processing of wet or dry mix. The machine is suitable either for manual spraying or by means of a robotic arm. WSZ3000 is developed for the application of shotcrete in tunnel building, mines and slopes. This machine has been designed especially for fibre spraying. And the dosing unit is combined with this machine. Basic: Electric drive can be combined with tyre chassis. Extended (optional): Air motor drive or diesel drive combined with Skid or Rail-wheel We are the shfactory, we can customize according to your requirements. If you have any questions, please contact us and we will provide you with the corresponding product parameters and quotations. Contact us for more information. Wode Heavy Industry Co., Ltd., short name Wodetec, is a manufacturer specialized is R&D, manufacture and sale of concrete shotcrete machine. We have developed full series of dry-mix shotcrete machines and wet-mix shotcrete machines, output from 1.5m3/h to 9m3/h, electric motor, diesel engine, air motor and gasoline engine are available options for customization. From years of experience Wode Heavy Industry Co., Ltd. has developed its own R&D and technician teams, which supports further development and customized service for clients. We also produce grouting machine, grouting equipment, mixing equipment, foaming machine, concrete pump, hose pump and a series of products.
WF5 clc foam concrete machine includes a screw conveyor, a concrete mixer, a foam generator and a hose pump, adopts advanced control technology, can exactly adjust the density of foam cement. The capacity is 5m3/h, which is specially designed for small project. It can put directly on the truck for working. Zhengzhou Wode Heavy Industry Co., Ltd. (short:"Wodetec") owns the advanced imported production equipment and complete production technology. Wodetec is a manufacturer specialized in R&D, manufacture and sale of foam concrete machine. We also have foaming agent and foam concrete pump. We have now developed full series of products with different of models. Max. output from 5-40m3 /h. Power , output, pressure and voltage are available options for customization.
Xinfeng Construction Machinery 600 stable soil mixing plant is a large-scale stable plant mixing one of the classic products, by virtue of advanced technology, excellent quality, stable quality, in the market enjoy a lot of reputation in Hebei, Hubei, Henan , Ningxia, Gansu, Jiangsu and other regional large-scale projects have emerged on its high figure. 600 water stable mixing station Stable soil mixing station operation should pay attention to the following main points: 1, in the production process, due to lack of transport vehicles or paving capacity and other reasons caused by a short period of time does not produce equipment, you can press the "break switch", so that the batching unit and impeller feeder feed; Pump motor, so that water supply to stop; and keep the rest of the normal operation of the motor. 2, batching units should always keep the aggregate in the aggregate specifications of the same. For the equipment with a broken arch device, the fence also has a safety protection, shall not be removed. When the other motor is not started, the pump motor can be started separately to clean the site or equipment. Therefore, it is necessary to recalibrate the calibration factor corresponding to the batching machine when replacing the aggregate size and adjusting the door opening. 3, for the greater impact on the outside world weather, easy to wet agglomeration or deterioration of the material, should be avoided in the distribution bucket long-term placement. 4, cement warehouse in the cement application every day, otherwise, the material in the warehouse will be back to the tide and hardening, causing the engine to start the problem, affecting the work of the next day. 5, on the batching unit calibration. In the powder distribution system, the impeller feeder and the screw conveyor are more sensitive to impurities in the powder, so the impurities in it to be timely and effective to remove, so as not to speed up the impeller feeder wear, affecting the accuracy of ingredients The 6, equipment operation, the operating staff should pay attention to observe the size of the main motor current, is strictly prohibited overload operation. The new type of concrete mixer, mixing station, batching machine, mixing station model is complete, wbz200, wbz300, wbz400, wbz500, wbz600 type water stable mixing station model is complete,
The track car is used to move molds from one rail to another. cooperate with the ferry car, the track car makes the production line working more smoothly. the amount of the track car of a production line depends on the amount of the rail. You can save your costs by buying more track car and less ferry car. -
Ferry car is used to move mold from one rail to another. Advantages: 1. Highly-automatic: the ferry car can walk automatically. Only one worker can finish the work. Compared to the traditional way, this car is more timesaving and needs less labor intensity. 2. Highly-efficiency: the work can be finished only by pushing the button. -
Ferry car is used to move mold from one rail to another. Advantages: 1. Highly-automatic: the ferry car can walk automatically. Only one worker can finish the work. Compared to the traditional way, this car is more timesaving and needs less labor intensity. 2. Highly-efficiency: the work can be finished only by pushing the button. -
Gongyi Xiaoyi Shield Machinery Manufacturing Factory produces automatic dual stacking machine. This machine is available for autoclaved aerated block, foam concrete block, hollow brick and so on. This kind of stacking machine is highly automatic,so it can increase work efficiency. In a word, it is the best choice of en-trucking and stacking.
Cutting machine is designed to cut blocks transversally and longitudinally. Advantages: 1. Highly-automated: you can control the machine only by pushing the button. Thus one to two workers can complete the work. 2. Attractive appearance: the cutting machine cuts the block from the top to the bottom. As the result, the bricks are angular and flattening. This is the unique characteristic that many other kinds of cutting machines does not have. 3. Flexible: Different clients need different sizes. This point is the problem that many factories want to solve. And our factory has already solved the problem. Our cutting machine can produce bricks of different sizes: 600/400*200*100, 600/400*200*200, 600/400*200*300, 600/400*200*240, 600/400*200*250, 600/400*100*300 and so on. Our machine is also flexible on time. As long as the brick is not dry out, you can cut the block at any time.
Cutting machine is designed to cut blocks transversally and longitudinally. Advantages: 1. Highly-automated: you can control the machine only by pushing the button. Thus one to two workers can complete the work. 2. Attractive appearance: the cutting machine cuts the block from the top to the bottom. As the result, the bricks are angular and flattening. This is the unique characteristic that many other kinds of cutting machines does not have. 3. Flexible: Different clients need different sizes. This point is the problem that many factories want to solve. And our factory has already solved the problem. Our cutting machine can produce bricks of different sizes: 600/400*200*100, 600/400*200*200, 600/400*200*300, 600/400*200*240, 600/400*200*250, 600/400*100*300 and so on. Our machine is also flexible on time. As long as the brick is not dry out, you can cut the block at any time.
The mold is a basic equipment to make blocks. The production capacity depends on the amount of the mold. The combination of the bottom of the mold and the wall of the mold is flexible. For example, you can produce 100 cubes of bricks by using 50 walls and 100 bottoms. So you can decrease the investment by buying more bottom and less wall. One can also save the cost by using the cement floor as the bottom of the mold.
What is foam mixer? The foam mixer is uniquely designed to mix foam agent with other materials, such as fly ash, sand, cement, etc. It can ensure the accuracy of the amount of raw materials, and improve efficiency as a result. What are the advantages of the foam mixer? 1. Raw material: Anything that can be mixed with cement is available to the foam mixer, such as sand, fly ash, cement,stone powder,slag, industrial waste, construction waste etc. So the use of foam mixer is not affected by the inflation of prices. In another word, the cost is fairly low. 2. Economies: the machine only costs a hundred thousand to hundreds of thousands of inequality. So it is suitable for medium and small-sized investors. 3. Environmental: the foam mixer is environmental. Because it does not need still kettle and boiler. As a result, there is no liquid waste and discharge gas. 4. Full automatization: the foam mixer is almost full automatization. Only several workers can complete the work.
What is foam mixer? The foam mixer is uniquely designed to mix foam agent with other materials, such as fly ash, sand, cement, etc. It can ensure the accuracy of the amount of raw materials, and improve efficiency as a result. What are the advantages of the foam mixer? 1. Raw material: Anything that can be mixed with cement is available to the foam mixer, such as sand, fly ash, cement,stone powder,slag, industrial waste, construction waste etc. So the use of foam mixer is not affected by the inflation of prices. In another word, the cost is fairly low. 2. Economies: the machine only costs a hundred thousand to hundreds of thousands of inequality. So it is suitable for medium and small-sized investors. 3. Environmental: the foam mixer is environmental. Because it does not need still kettle and boiler. As a result, there is no liquid waste and discharge gas. 4. Full automatization: the foam mixer is almost full automatization. Only several workers can complete the work.
What is foam mixer? The foam mixer is uniquely designed to mix foam agent with other materials, such as fly ash, sand, cement, etc. It can ensure the accuracy of the amount of raw materials, and improve efficiency as a result. What are the advantages of the foam mixer? 1. Raw material: Anything that can be mixed with cement is available to the foam mixer, such as sand, fly ash, cement,stone powder,slag, industrial waste, construction waste etc. So the use of foam mixer is not affected by the inflation of prices. In another word, the cost is fairly low. 2. Economies: the machine only costs a hundred thousand to hundreds of thousands of inequality. So it is suitable for medium and small-sized investors. 3. Environmental: the foam mixer is environmental. Because it does not need still kettle and boiler. As a result, there is no liquid waste and discharge gas. 4. Full automatization: the foam mixer is almost full automatization. Only several workers can complete the work.
The push car is designed to push the mold to the bottom of the foam mixer. it is usually fixed on the start of the rail. cooperate with the ferry car, only one worker can control the pouring section.
The push car is designed to push the mold to the bottom of the foam mixer. it is usually fixed on the start of the rail. cooperate with the ferry car, only one worker can control the pouring section.
The mold is a basic equipment to make blocks. The production capacity depends on the amount of the mold. The combination of the bottom of the mold and the wall of the mold is flexible. For example, you can produce 100 cubes of bricks by using 50 walls and 100 bottoms. So you can decrease the investment by buying more bottom and less wall. One can also save the cost by using the cement floor as the bottom of the mold.
