Xinfeng Construction Machinery 600 stable soil mixing plant is a large-scale stable plant mixing one of the classic products, by virtue of advanced technology, excellent quality, stable quality, in the market enjoy a lot of reputation in Hebei, Hubei, Henan , Ningxia, Gansu, Jiangsu and other regional large-scale projects have emerged on its high figure.
600 water stable mixing station
Stable soil mixing station operation should pay attention to the following main points:
1, in the production process, due to lack of transport vehicles or paving capacity and other reasons caused by a short period of time does not produce equipment, you can press the "break switch", so that the batching unit and impeller feeder feed; Pump motor, so that water supply to stop; and keep the rest of the normal operation of the motor.
2, batching units should always keep the aggregate in the aggregate specifications of the same. For the equipment with a broken arch device, the fence also has a safety protection, shall not be removed. When the other motor is not started, the pump motor can be started separately to clean the site or equipment. Therefore, it is necessary to recalibrate the calibration factor corresponding to the batching machine when replacing the aggregate size and adjusting the door opening.
3, for the greater impact on the outside world weather, easy to wet agglomeration or deterioration of the material, should be avoided in the distribution bucket long-term placement.
4, cement warehouse in the cement application every day, otherwise, the material in the warehouse will be back to the tide and hardening, causing the engine to start the problem, affecting the work of the next day.
5, on the batching unit calibration. In the powder distribution system, the impeller feeder and the screw conveyor are more sensitive to impurities in the powder, so the impurities in it to be timely and effective to remove, so as not to speed up the impeller feeder wear, affecting the accuracy of ingredients The
6, equipment operation, the operating staff should pay attention to observe the size of the main motor current, is strictly prohibited overload operation.
The new type of concrete mixer, mixing station, batching machine, mixing station model is complete, wbz200, wbz300, wbz400, wbz500, wbz600 type water stable mixing station model is complete,
Supplier: Urea 46%, frozen chicken, frozen beef, sugar icumsa 45, soybean, yellow corn, maize, n.p.k for agriculture, npk, glue, lamination glue, based water glue, adhesive, bitumen
Supplier: Our offerings include sewage treatment plants (stp), effluent treatment plants (etp), rainwater harvesting systems, and water softeners designed to enhance water management and sustainability. we also specialize in industrial reverse osmosis (ro) and ultrafiltration (uf) plants, ensuring efficient water purification for industrial applications. additionally, we supply fencing chain links, chill rolls, and solid rolls for steel rolling mills, alongside essential tools like scaffolding, hand tools, and spanners. bio digester, sewage treatment plant, effluent treatment plant, industrial r.o. (reverse osmosis) plant, reverse osmosis plant, ultra filtration system, industrial water filters, uv steriliser, prefabricated septic tank, prefabricated bio digester (b.d.)
CASE MW36 Wheel Loader - Typical Specifications Operating Weight: Approximately 3,200 to 3,600 kg (about 7,000 to 8,000 lbs) Bucket Capacity: Generally around 0.65 to 0.9 cubic meters Dimensions: Overall Length: Approximately 4.0 m (varies with configuration) Width: Roughly 2.5 m Height: Around 3.0 m Lift Height: Typically in the range of 2.5 to 3.0 m Transmission: Options may include hydrostatic or mechanical drive, depending on the model configuration Additional Features: Ergonomic operator station Versatile hydraulic system for various attachments
Mitsubishi MG400 Motor Grader Specifications Main Specifications Blade Width: 3710mm (standard blade width) Steering System: ATC Weight & Loads Operating Weight: 13,100kg Front Axle Load: 3,700kg Rear Axle Load: 9,400kg Dimensions Overall Length: 8490mm Overall Width: 2400mm Overall Height: 3360mm Wheelbase: 5910mm Tandem Wheelbase: 1520mm Ground Clearance: 355mm Engine Manufacturer: MTB Model: 6D22C Rated Output: 110.3kW (150 PS) @ 2000rpm Cylinders: 6 Bore x Stroke: 130 x 140mm Displacement: 11.2liters Hydraulic System Output Pressure: 17.2MPa Oil Flow Rate: 128L/min Transmission Type: DPS Speeds: 6 forward / 6 reverse Max Travel Speed: 45.0km/h (forward), 45.4km/h (reverse) Tires Front: 13.00-24, 14-ply Rear: 13.00-24, 14-ply Performance & Other Features Operation Type: Hydraulic (HYD) Scarifying Width: 1225mm Minimum Turning Radius: 6900mm Articulate Angle: 25 Fuel Tank Capacity: 230L Optional Equipment: BL(4000), S/C
Supplier: Mining equipments, hdpe pipes and geomembranes, industrial constructions, special vehicles. spanish ceramic tiles, electric cables and hdpe conduits. hotel equipment, as per kitchens, restaurants, industrial laundry, chemical products, irrigation material
Buyer: Chemical products.
Supplier: We are merchant traders have two different divisions, one is plant/ machineries, industrial equipements, and other divisions is export / import of agricultural commodities, spices, processed foods, we are exporters for all type of plants, machineries, and friction welding machine, friction stir welding machine, cnc heavy duty lathe machine, lathe machine, 8k 4k mirror polishing machine, gun driling machine, cnc vtl, cnc plano miller
our commodities includes grains, pulses, spices, processed foods, coconut related products, rices, coconut powder, multani mitti ( fullers earth) , makhana, banana powder, etc
Services: We are exporters and importers of all type of commodities and machineries.
Buyer: We are importing all types of spices, grains, pulses, processed foods, coconut powder, coffee, cashew, nuts, vegetables, fruits etc
- Mixing tank capacity: 5.2m3 - Concrete capacity: 3m3 - Dimension: 4250mm*1900 mm*1800 mm - Weight: 1.650kg - Hydraulic motor: BM 160 Manufactured and shipped from Viet Nam. You sign papers and pay directly to the factory. You can visit factory in Viet Nam.
- Mixing tank capacity: 7.0m3 - Concrete capacity: 4m3 - Dimension: 4150mm*2200mm*1900mm - Weight: 2.200kg - Hydraulic motor: BM 200 Buyer signs papers and pays directly to factory in Viet Nam. Buyer can visit factory in Viet Nam.
- Mixing tank capacity: 8.6m3 - Concrete capacity: 5m3 - Dimension: 4800mm*2450mm*1900mm - Weight: 2.630kg - Hydraulic motor: BM 200 Buys signs papers and pays directly to factory in Viet Nam. Product is manufactured in Viet Nam. Buyer can visit factory in Viet Nam
