JBK3 machine control transformer Use products It is suitable for AC circuit of 50-60hz,output rated voltae less than 220V,inputrated voltage less than 500V,worked as control power supply for mechanical equipment and general electrical appliance and as power supply for work lighting and signal lamp.
High switching performance with minimal energy consumption High sensitivity, low power consumption, easy to install. Small size, light weight High vibration and shock resistance. The contact terminal can be modified as per customer specification. Oem/odm acceptable. Miniature size
Ipc series insulation piercing connectors Piercing connector, simple installation, need not strip the cable coat. Moment nut, piercing pressure is constant, keep good electric connection and make no damage to lead. Self-seam frame, wetproof, waterproof, and anti-corrosion, extend the using life of insulated lead and connector. Adopted special connecting table, apply to joint of cu(al) and cu(al) or cu and al. Small electric connecting resistance, impulse current can be up to 15ka. Special insulated case body, resistance to illumination and environmental aging, the insulation strength can up to 6kv. Arc surface design, apply to connection with the same (different) diameter, wide connection scope (1.5-240mm2) Packaging by cartons
Series ac contactor is suitable for using in the circuits up to the rated voltage 660v ac 50hz, rated current up to 95a, for making, breaking, frequently starting & controlling the ac motor. Combined with the auxiliary contact block, timer delay & machine-interlocking device etc, it becomes the delay conactor, mechanical interlocking contactor, star-delta starter. With the thermal relay, it is combined into the electromagnetic starter. The contactor is produced according to iec947-2, vde0660 & bd5452.
The contactor is suitable for using in the circuits up to the rated voltage 660v ac 50hz or 60hz, current 300a, for convertible controlling the motor. It's mechanical interlocking device ensures contact changeover of the two convertible contactor.
Time relay can be widely used in machines and equipment needing self-control of high precision and reliability. It is characteristic of small size, light weight, compact structure, high dependable and efficient,long life,etc.
AC contactor, magnetic contactor, household contactor, air conditioning contactor, circuit breaker, plug and socket, wire connector.
Solar system, wind generator, solar charge controller, power inverter, cable, connector.
MCB, MCCB, VCB, contactor, relay, energy meter, transformer, switchgear, light, switch, starter, fuse, power supply.OEM, ODM
Terminal Block Distribution Box Din Rail Terminal Block Description The terminal block distribution box plays an important role in branching the mian line.Generally it is used for distribution cabinet and various high voltage cabinet.An electric power distribution terminal block is a convenient, economical and safer way to distribute power from a single input source to multiple outputs.It is always used with the din rail,so it is also named din rail terminal block. Product parameter Item No. Current(A) Voltage(V) Conductors with starfix temules X-section(mm2) Hole NO.(pcs) Dimension(L*W*H)(mm) CRUKK-80 85 690 IEC Input 6 to 16 x1 30*69*49 Output 2.5 to 6 x4 Output 2.5 to 16 x2 CRUKK-125 150 690 IEC Input 10 to 35 x1 29*77*46 Input 6 to 16 x4 Output 2.5 to 16 x6 CRUKK-160 200 690 IEC Input 10 to 35 x1 29*77*46 Input 6 to 16 x4 Output 2.5 to 16 x6 CRUKK-250 255 690 IEC Input 35 to 120 x1 47*96*50 Output 6 to 35 x2 Output 2.5 to 16 x5 Output 2.5 to 10 x4 CRUKK-400 335 690 IEC Input 95 to 185 x1 47*96*50 Output 6 to 35 x2 Output 2.5 to 16 x5 Output 2.5 to 10 x4 CRUKK-500 520 690 IEC Input 3x15.5x0.8 to 8x24 x1 49*96*50 Output 6 to 35 x2 Output 2.5 to 16 x5 Output 2.5 to 10 x4 Material of din rail terminal block Terminal material: the terminal is made of excellent brass tinned,which is firm and durable,with strong corrosion resistance and good conductivity. Shell material: the shell is made of Flame retardant nylon material,which is high strength and strong insulation performance. Screw material: zinc stee,metric thread screw. Features of Terminal Block Distribution Box Made of flame-retardant shell, it is high temperature resistant and corrosion resistant. The installation is simple and safety.The terminal block distribution box is easy and quick to install on the din rail. The transparent cover can easily see if the cable is conneted reliably. Cable fixing screw diametersï¼?95% fill ratio: excellent electrical. Clip-on DIN rail or mount to panel with screws: easy fixing.keeping only one input, the blocks can be connected in parallel using a jumper wire. DIN rail or panel mount Wire ready: captive termination screws shipped backed out to save time on conductor installations Hot tage: Terminal block,Terminal box,din rail terminal block Contact information: CROP China
CE Certificate CJX2 series 3P AC Contactor Our featured products automatic transfer switch, circuit breaker, contactor, pilot light,relay, SPD, etc. with solid quality and considerable price and could equip them with enclosure. Application CJX2 Series AC contactor is mainly applies to the circuit of AC 50Hz/60Hz, and rated insulation voltage 660V. When use in AC-3, and rated operational voltage is 380V, rated current up to 630A, for long distance breaking circuit and frequently starting or control the motor. Combined with proper thermal overload relay can protect load circuit. Contactor can frequently start and control AC electromotor. Construction Features 1. Adopt build-in block system to mount auxiliary contractor block, air delay auxiliary contractor, thermal overload relay and so on, which can be combined into multiple derved series product. 2. Contactor has the advantage of Small volume, light, low consumption, long life and good safety. 3. Main contactor below 32A has 1N/C or 1N/O, there is 1N/C and 1N/O above 40A, Contactor can be assembled with F4, F8 auxiliary contact or time-delay block. 4. Contactor can not only use screw mounting, but also use 35mm(CJX2-09-95), 75mm (CJX2-40-95) and 2x35mm (CJX2-D115-170) international standard Din-rail mounting
Our featured products automatic transfer switch, circuit breaker, contactor, pilot light,relay, SPD, etc. with solid quality and considerable price and could equip them with enclosure. T91 Miniature PCB Relay General Purpose Relay Model: HHC67F(T91) Dimension (mm): 32.5 27.5 27.5 Contact Contact form: 1A,1B,1C Contact Rated load: 30A,40A 240VAC/28VDC Contact Material: Silver alloy Contact Electrical life: 105 time Pick-up voltage (23 ºC) DC: 75% Rated voltage Pick-up voltage (23 ºC) AC: 80% Rated voltage Release voltage (23 ºC) DC: 10% Rated voltage Release voltage (23 ºC) AC: 30% Rated voltage Coil voltage DC: DC3V-110V Coil voltage AC: AC6V-240V Coil power: DC:0.93W AC:1.2VA Operate / Release time: 15ms / 10ms
Cross section parallel groove clamp is suitable for non-load-bearing connection & branches subjected to overhead power line, with convenient and flexible installation; it is suitable for a large range of wire and so on. JBKG series are adopted technics of friction welding & brazing while the usage of clamp combined with the insulating cover will be helpful to insulation provention.
Material 1.Body Material : UV-resistant plastic 2. Nut Material : Hot-dip galvanized steel 3. Teeth material: Cu or AL
Applications Type:Overhead Transmission and Distribution Connections Product Type Features;Wedge Housing Features:Insulated Cover Voltage Class:0-200KV Usage Conditions:Operating Temperature(??F)-30 to 120
Products Pictures.png 36.jpg Technical information.png Product Name Specifications Modael Remarks Main Lead Lead wire Ground clamp Wedge-type and groove clamp(ejectorcore) JXD-1 JXL-1 35-50 35-50 JXD-1 JXD-2 70-95 35-50 JXD-3 70-95 70-95 JXD-4 JXL-2 120-150 35-50 JXD-3 JXD-5 120-150 70-95 JXD-6 120-150 120-150 JXD-7 JXL-3 185-240 35-50 JXD-4 JXD-8 185-240 70-95 JXD-9 185-240 120-150 JXD-10 185-240 185-240
Suitable for ACSR, JKLJY, AAC, LJ,TJ, LGJ,LGJF cables 1.max touch between cable&conductor 2.good heat recycle 3.high strength AL alloy, stainless bolt
Product Specification: polycarbonate sheet connector h and u profile is used as connector of 4.0mm/6.0mm ; 8.0mm/10.0mm 14mm/16mm polycarbonate hollow sheet Standard size : 6 Meter Standard color : clear
jbk3 control transformer - Power Capacity¡êo40va-2500va - UEL Rated Input Voltage¡êo220v;380v - Rated Output Voltage(control):110V(127V) - Rated Output Voltage(illumination):24V(36V) - Rated Output Voltage(indication):6V(12V) jbk3 control transformer - Power Capacity¡êo40va-2500va - UEL Rated Input Voltage¡êo220v;380v - Rated Output Voltage(control):110V(127V) - Rated Output Voltage(illumination):24V(36V) - Rated Output Voltage(indication):6V(12V)
Single phase Phase 100A Latching relay TP41-28: -Single phase 100A switching capability ; -Multi layer blades, low temperature rise ; -Environment protection ( Comply with ROHS) -It can be applied in single phase or three phase 100A Electricity meter.
