Time relay can be widely used in machines and equipment needing self-control of high precision and reliability. It is characteristic of small size, light weight, compact structure, high dependable and efficient,long life,etc.
Product Usage Programmable time relays include JSBXC-780, JSBXC-820, JSBXC-820, JSBXC1-850, and JSBXC1-870 series relays. Each type of relay has four types of warm-up time to choose from, among which JSBXC1-870 series The heating time can also be changed according to the special requirements of users. The relay is used as a delay control in the circuit. Applicable environment a) Ambient temperature: -5~+40; b) Relatively moderate: not more than 90% (temperature +25); c) Air pressure: not less than 70KPa (equivalent to an altitude below 3000m); d) Vibration: the frame rate is not more than 15Hz, and the amplitude is not more than 0.45mm; e) Rated voltage: DC 24V, voltage fluctuation range 24X (1�±10%) V; f) Working position: horizontal; g) There is no harmful gas causing explosion hazard around, and good dust-proof measures should be applied. Mechanical properties 1614996944256898.jpg Electrical characteristics .jpg Note: The error range of the resistance value of the relay coil is ±(nominal resistance value10%) Time characteristics
Applicable environment a) Ambient temperature: -5~+40; b) Relatively moderate: not more than 90% (temperature +25); c) Air pressure: not less than 70KPa (equivalent to an altitude below 3000m); d) Vibration: the frame frequency is not more than 15Hz, and the amplitude is not more than 0.45mm; e) Rated voltage: DC 24V, voltage fluctuation range 24X (1±10%V; f) Working position: horizontal; g) There is no harmful gas causing explosion hazard around, and good dust-proof measures should be applied. Mechanical properties 1614998643577125.jpg Precautions a) The identification pin numbers of the programmable time relays are the same. Please confirm the corresponding slow suction time of the corresponding type of relay before use. b) Terminals 1, 2, 3, and 4 of the two coils of the relay are directly connected in parallel with the two diodes on the printed circuit; therefore, when measuring the electrical characteristics of the relay, the positive pole of the power supply must be connected to the terminals 1, 3, and the negative pole of the power supply must be connected to the terminals 1, 3. On terminals 2, 4. C) Contacts 11 and 12 are already occupied by the relay, and the number of contacts that can be used by the user is 2QH, 1Q. d) The position of the relay contact system is shown in Figure 1. When in use, the socket must be equipped with an identification pin. e) The use environment of the relay should have good ventilation conditions and dust-proof equipment. And used in specially designed circuits; in special circumstances, the electrical characteristics and contact capacity of the relay should be considered to ensure the reliable operation of the relay.
ENVIRONMENTAL CONDETIONS: Temperature Range: -55~+85 C Relative Humidity: Up to 98% at +40 C Atmospheric pressure: 86kPa~106kPa, Low pressure 4 kPa Vibration: 10~2000Hz, 196 m/s2 Shock: 735m/s2 Acceleration: 490 m/s2. TECHNICAL REQUIREMENTS: Rated Voltage: 12VDC, 18VDC, 24VDC, 27VDC Insulation Resistance: 1000Mohm Dieletric Withstanding Voltage: (RMS/50Hz) 500V Contact Resistance: 0.1ohm Rated Load: 2A28VDC, 4A28VDC Life: 1x105: 1x105 / 2x104 Contact Form: 2C(DPDT); Time Delay: 0.05~500s(Nonadjustable) Outline Dimensions: 20.5 x 10.5 x 15mm Weight: 13g .
ALSTOM GBCDG11AF9007ACH INVERSE TIME E/F RELAY MULTI-AUX-VOLTAGE Technical specification Relay model no CDG11AF9007ACH Relay type CDG 11 Case size 1D S/E Application E/F Current setting 1 to 4 amps C.T.Secondary 5 amps Taps Std Burden 3 VA Operating time 3 secs Frequency 50 Hz Aux.voltage vdc 30-50 / 100-125 V 220-250 V dc Contacts shunt 2 N/O S/R Flag Yes Mounting Type Flush Name plate RFG9126 796 Outline drawing MFJ 012 Wiring diagram MADZ 802.26-1
Supplier: Time relay, PCB single sided
We offer BC Brand JRC-071M Subminiature Hermetically Sealed Relay. ENVIRONMENTAL CONDITIONS: Temperature Range: -65~+125C Relative Humidity: 40 C at 95% Atmospheric Pressure: 86~106kPa,Low Pressure 4.4 kPa Shock: 490m/s2 Vibration: 10~2000Hz, 196m/s2 Liner Acceleration: 490m/s2 TECHNICAL DATA: Contact Arrangement: 4 Form C (4PDT) Coil Voltage: DC Coil Dissipation: 0.9W Insulation Resistance: 1000Mohms Dielectric Withstanding Voltage: 500V r.m.s. Contact Resistance: 0.10ohms Operate Time: 8ms Release Time: 5ms Contact Load : 2A/28VDC(Resistive) Life: 1 x 104 Operations Leakage:1 x 10-1 Pa.cm3 /s Dimensions: (L x W x H) 21 x 11 x 11.5mm Weight: 11g . Ordering Information: JRC-071M/ 027 - 0 1 1 2 3 4 . 1. Model 2. Part No.(Coil Voltage) 3. Mounting Type 4. Terminals .
Temperature Range: -55 ~ +85C Relative Humidity: 98% at +40C Atmospheric Pressure:86~106kPa,Low pressure 4.4kPa Shock: 490m/s2 Vibration: 10~500Hz,98m/s2 Liner Acceleration: 245 m/s2.
ENVIRONMENTAL CONDITIONS: Temperature Range: -55 ~ +85C Relative Humidity: 98% at +40C Atmospheric Pressure: 86~106kPa, Low pressure 4.4kPa Shock: 117.6m/s2 Vibration: 500Hz,58.8m/s2 Liner Acceleration: 147 m/s2. TECHNICAL DATA: Contact Arrangement: 6 Form C (6PDT) Coil Voltage: 12~27VDC Coil Dissipation: 2.5W Insulation Resistance: 500Mohms Dielectric Withstanding Voltage (RMS/50Hz): 500Vr.m.s. Contact Rresistance: 0.05ohms Operate Time: 8ms Release Time: 4ms; Contact Ratings: 2A27VDC Resistive Electrical Life: 1 x10 5 Operations Leakage Rate: 1 x 10 0 Pa.cm3 /s Dimensions: + 31 x 34 mm Weight: 75g Approved by Standards: QZJ840617 .
CONTACT RATINGS: Contact Arrangement: 1 Form A (SPST-NO) Max. Switching Power: 1200VA / 300W Max. Switching Voltage: 120VAC / 30VDC Max. Switching Current: 10A Contact Resistance: 100mOHMS Initial Contact Resistance: 100mOHMS Rating Load: 5A250VAC,30VDC Contact Material: Ag-CdO. TECHNICAL REQUIREMENTS: Coil Source:DC Coil Dissipation:1H1:0.45W; 1H1L:0.2W Insulation Resistance:100MOHMS Dielectric Withstanding Voltage (RMS/50Hz) 750VAC(between contacts) 3000VAC(between coil and contacts) Electrical Life:1x10 5 Operations Mechanical Life:1x10 7 Operations Contact Form:1A(SPST) Operate Time:10ms Release Time:2ms Outline dimensions:18.2mm x 10.5mm x 15mm Weight:9g Approved standard:UL,CUL(E151736),TUV,CQC. ENVIRONMEN , TAL CONDITIONS: Temperature Range:-40~+85C Relative Humidity:Up to 45~85% at +20C Atmospheric Pressure:86~106kPa Vibration:10~55Hz Dual Amplitude 1.5mm Shock:98m/s2 Operating Position:Optional .
