All machines that can convert mechanical energy into electrical energy and electrical energy into mechanical energy.
ZSZ-2020 automatic conical paper tube reel is suitable for conical tubes of various specification. After hanging the paper roll, internal and external printing, edge grinding, cutting, reeling, head cutting, the semi-finished paper tube will be sent to the dryer. It takes double speed variable frequency control technology. The reeling speed will be adjusted automatically. The whole process is eased by connecting with the dryer. Main parameter: For conical tubes with various taper and calibre. Speed:110 pcs/min Power: 15kw Size: 6080mm*2500mm*1500mm
This machine is suitable for conical tubes of various specification.After hanging the paper roll,internal and external printing, edge grinding,cutting.reeling.head cutting,the semi-finished paper tube will be sent to the dryer.It takes double speed variable frequency control technology.The reeling speed will be adjusted automatically .The whole process is eased by connecting with the dryer.
ZSZ-2020 automatic conical paper tube production line need no manual operation from raw paper to paper tube product. The whole production process is controlled by PLC programming, main engine transmission uses cam timing mechanism. All bearings of the machine adopt Japanese NSK bearings. Each position takes double speed variable frequency control technology. Also the none mechanical abrasion photoelectric control, approaching control and pneumatic delay control, which realize the mechanical and electrical integration. Suitable for the production of conical tube with various specification. Process: Rolling---internal and external printing---edge grinding---cutting---Reeling---Drying---Finishing---cutting V-shaped opening---opening processing---pressing---grinding---galling---finishing Main Parameter: Power:45KW Speed: 110 pcs/min Size: 14000mm*7000mm*3800mm Operator: 1
ZSZ-2020 after finishing part is designed to turn the semi-finished product into conical paper tube after V cutting, grinding, pressing, reversing and galling. The speed can be adjusted freely with over-load protector and automatic stopping equipment when the improper operation happens to guarantee the safety and stability and lower the waste rate. The after finishing machine can also be used individually. Main parameter: For conical tubes with various taper Speed: 110 pcs/min Power: 12kw Air pressure: 0.3-0.4mpa Size: 4500*1900*1580mm
ZSZ-2020 automatic conical paper tube production line need no manual operation from raw paper to paper tube product. The whole production process is controlled by PLC programming, main engine transmission uses cam timing mechanism. All bearings of the machine adopt Japanese NSK bearings. Each position takes double speed variable frequency control technology. Also the none mechanical abrasion photoelectric control, approaching control and pneumatic delay control, which realize the mechanical and electrical integration. Suitable for the production of conical tube with various specification. Process: Rolling---internal and external printing---edge grinding---cutting---Reeling---Drying---Finishing---cutting V-shaped opening---opening processing---pressing---grinding---galling---finishing Main Parameter: Power:45KW Speed: 110 pcs/min Size: 14000mm*7000mm*3800mm Operator: 1
ZSZ-2020 automatic conical paper tube production line need no manual operation from raw paper to paper tube product. The whole production process is controlled by PLC programming, main engine transmission uses cam timing mechanism. All bearings of the machine adopt Japanese NSK bearings. Each position takes double speed variable frequency control technology. Also the none mechanical abrasion photoelectric control, approaching control and pneumatic delay control, which realize the mechanical and electrical integration. Suitable for the production of conical tube with various specification. Process: Rolling---internal and external printing---edge grinding---cutting---Reeling---Drying---Finishing---cutting V-shaped opening---opening processing---pressing---grinding---galling---finishing Main Parameter: Power:45KW Speed: 110 pcs/min Size: 14000mm*7000mm*3800mm Operator: 1
ZSZ-2020 automatic conical paper tube production line need no manual operation from raw paper to paper tube product. The whole production process is controlled by PLC programming, main engine transmission uses cam timing mechanism. All bearings of the machine adopt Japanese NSK bearings. Each position takes double speed variable frequency control technology. Also the none mechanical abrasion photoelectric control, approaching control and pneumatic delay control, which realize the mechanical and electrical integration. Suitable for the production of conical tube with various specification. Process: Rolling---internal and external printing---edge grinding---cutting---Reeling---Drying---Finishing---cutting V-shaped opening---opening processing---pressing---grinding---galling---finishing Main Parameter: Power:45KW Speed: 110 pcs/min Size: 14000mm*7000mm*3800mm Operator: 1
ZSZ-2020 automatic conical paper tube reel is suitable for conical tubes of various specification. After hanging the paper roll, internal and external printing, edge grinding, cutting, reeling, head cutting, the semi-finished paper tube will be sent to the dryer. It takes double speed variable frequency control technology. The reeling speed will be adjusted automatically. The whole process is eased by connecting with the dryer. Main parameter: For conical tubes with various taper and calibre. Speed:110 pcs/min Power: 15kw Size: 6080mm*2500mm*1500mm
JR-N wire winding and torsion testing machine is a testing machine used to test the toughness and adhesion performance of overhead stranded wire frame and (or) reinforced galvanized steel wire, which meets the requirements of GB/T3428-2002 Galvanized Steel Wire for Overhead Stranded Wire: Winding and Torsion Test.
Dimension: 32.00cm Packing type: color box Height: 1.50cm Color: black color with shiny bottom Weight: 2.98kg
The thread rolling wheel is a tool for rolling out threads by means of metal plastic deformation on the thread rolling machine.
According to the machine's process, the gypsum board production line can be divided into five parts: Ingredient and shaping system, centralized control system, auto board-enter, auto board-exit and drying system. The preparation, shaping, drying process is highly automatic, even the beginner can operate it. Auto board-enter system: Auto board cutter, belt conveyor, roller, board turnover machine, kiln enter distributor, faster board-enter and other equipment, through PLC auto control, the process of cutter, speed-up, kiln enter of gypsum board is finished.
Chemistry gypsum powder production line:ªG building gypsum powder. Chemistry gypsum is refers to the industrial production process, forms industrial products, such as desulphurization gypsum, phosphorus gypsum, fluorine gypsum, lemon gypsum and so on.Raw material characteristic:the surface water is more than 20%, the ingredient relative is unstable. Building gypsum powder production technology introduction: Uses raw material pre-drying , bolling stove calcine that two step calcine technique of production, use car loader to transport raw material from dump site to material basket, by beater, the belt conveyer to transport uniformly to the dryer(the heat source of this place is that burn coal the hot-blast stove), though collection powder equipment vertical transmisslon equipment brought into boilling stove calcined(that furnace heat is the htf stove), after calcination shipped goals mushroom grinding machine modified and cooling, and from promotion transportation to the warehouse, packaging warehouse. Wooden case & plaste
When heating and calcining the dihydrate gypsum, the dihydrate gypsum will be decomposed, we can produce the semi-hydrated gypsum (CaSO4?/2H2O) , that is building gypsum, also called plaster of paris. Because of the different temperature and pressure when decompose the gypsum, we can get different product, a-type gypsum and b-type gypsum. a-type gypsum is high-strength gypsum,b-type gypsum is building gypsum. They are the same technology using mechanisation producing building gypsum. The process can be divided into three system, crashing system, calcining system and milling system. Wooden case & plaste
Measurement of specific gravity density of cable material by solid density meter Wire and Cable Detection Equipment digital display density measuring instrument LJ-300A is the largest digital display density measuring instrument used by a large number of people at present. Its precision is one thousandth of that. Compared with the traditional densitometer, this machine is more convenient, faster and less time. The most remarkable feature of lj-300a is that it is accurate, easy to operate and stable and durable. This digital display density measuring instrument adopts integrated injection molding measuring frame. Integrated injection molding transparent water tank, professional, convenient, anti-corrosion, anti-fall, anti-break; The suspension line in water is made of 0.5mm stainless steel material, which does not bend or deform, and does not touch the tank vertically with the suspension column. Lj-300a is an economic solid state specific weight meter, which is mainly targeted at: rubber, plastic, wire and cable, electrical appliances, sports equipment, tires, glass products, hard alloy and new materials research laboratory. Lj-300a economic-type solid weight meter is based on ASTM D792, ASTM D297, GB/T1033, GB/T2951, GB/T3850, GB/T533, hg4-1468, JIS K6268, ISO 2781, and ISO 1183... Standard specifications. We are Cable Detection Equipment Supplier
5KV Power frequency high-voltage test console Wire and Cable Detection Equipment Power Frequency High Voltage Test Console The power frequency high-voltage test console is designed for finished low-voltage cables, which is composed of the console, a 50KVA induction regulator and an experimental transformer. It has a standard capacity of 50KVA and a voltage of 5KV. The low-voltage cable can generally withstand the voltage of 3.5KV, and the equipment can withstand the voltage of 5KV. The equipment is operated by electric control. In addition, high voltage will automatically return to zero in case of cable break and give a sound-light alarm and leakage protection, so as to protect the safety of the operator and the staff to the most extent. Main technical parameters of the system: Rate capacity 50kVA/ 100KVA/ 150KVA/ 200KVA Rated input voltage 380V Rated output voltage 0-5KV/ 0-10KV/ 0-15KV/ 0-20KV/0-25KV Main technical indicators: 1. It will automatically give an alarm (sound-light) and delay in cutting off high voltage (adjustable from 0.1-1S) in case of test piece breakdown. 2. Zero potential of voltage regulator is started under high voltage. 3. The voltage regulator automatically returns to zero after breakdown, overcurrent protection and non-zero tripping under high voltage. 4. Cut off the power source after the hold-off time is up and voltage automatically returns to zero at the step-up rate. 5. The hold-off time of digital display time relay is adjustable. 6. Measurement accuracy of high-voltage output and current output is +3%. ã??ã??When low-voltage wires are used in the power frequency withstand voltage test, the equipment with a voltage of 5KV and capacity of 50KVA is usually used. ã??ã??Voltage capacity may be customized according to customer needs. We are Cable Detection Equipment Supplier
Spark Breakdown Tester Wire and Cable Detection Equipment The SPARK TESTER is designed and manufactured in accordance with Standard GB/T3048.9-94 and Standard JB/T4278.10-93 on the basis of learning from similar products at home and abroad, and is suitable for the power frequency spark test on the insulation layer of rubber and plastic wires and cables. In addition, it is known as an important test equipment to ensure the insulation quality of wires and cables.ã?? The 25KV type power frequency SPARK TESTER meets the test requirements of the new national standard GB/T3048-2007, and is a professional equipment to detect wire, cable, insulation and sheath defects. It adopts the solid state AC voltage regulation and single-chip microprocessor control technology, characterized by stable output of high voltage (subject to no grid voltage change), high detection sensitivity, good field adaptability, convenient to use, safety and reliability and novel and beautiful structure. The tester is dedicated for the dielectic strength test on finished cables of insulation wires whose test voltage value is 25KV and below. Technical indicators Operating conditions of device Mains voltage AC220V±10% Detection voltage: Continuously adjustable Bead chain of inspection electrode: ø5mm (standard nickel plated bead chain) Mains frequency 50±2Hz High sensitivity: (600 uA) Detection mode: Online detection/winding detection Ambient temperature 0~40°C Maximum number of detected cables ø100MM/150MM Indicating method of breakdown: Counting function of breakdown number and bell alarm, and the breakdown point is obviously visible. We are Cable Detection Equipment Supplier 8Zinc layer weight test apparatus Weight detection of core layer of overhead aluminum stranded wire
Ultraviolet Irradiation Crosslinking Equipment Application of UV-light irradiation cross-linked equipment The UV-light irradiation cross-linking process uses UV-light as the irradiation source, extrudes and coats the mixed photo-crosslinking polyolefin compound on the conductor wire core, and then immediately enters the special irradiation equipment for fused photo-crosslinking. The insulated wire core after light irradiation cross-linking can be produced into photo-crosslinking polyolefin insulated wire and cable products through cooling treatment at different temperatures and other subsequent processing. UV-light irradiation cross-linking method needs to be slightly modified only on the original normal extrusion production line. The upper traction, irradiation box and electric control cabinet with a small floor area can meet the operating requirements and produce UV-light irradiation cross-linked polyethylene wire and cable products. The addition of upper traction enables the conductor wire core to maintain a certain tension. In the running process, it shall be always in the center of irradiation box to ensure the best irradiation effect. The irradiation box uses a reflective focused UV light source that is uniformly configured and specially designed, and the electrical control system will ensure that the UV-light intensity and the irradiation temperature in the center of the irradiation box are in the optimum operating conditions. In addition, the efficient photo-initiation system rapidly induces cross-linking reaction of polyolefin under the UV-light irradiation, so that the irradiation equipment can reach a continuous production speed of dozens of meters per minute, and gradually cools at hot, warm and cold temperatures to ensure the stability of three-dimensional cross-linked netlike structure.
CP-50 Wire and cable sheet-punching machine Wire and Cable Detection Equipment Cable Detection Equipment Supplier CP-50 type die punching machine is used to punch rubber, plastics, leather and other special materials into test pieces specified in various standards for trial use. In addition, it can also be used as small punch press.
