Ultraviolet Irradiation Crosslinking Equipment
Application of UV-light irradiation cross-linked equipment
The UV-light irradiation cross-linking process uses UV-light as the irradiation source, extrudes and coats the mixed photo-crosslinking polyolefin compound on the conductor wire core, and then immediately enters the special irradiation equipment for fused photo-crosslinking. The insulated wire core after light irradiation cross-linking can be produced into photo-crosslinking polyolefin insulated wire and cable products through cooling treatment at different temperatures and other subsequent processing.
UV-light irradiation cross-linking method needs to be slightly modified only on the original normal extrusion production line. The upper traction, irradiation box and electric control cabinet with a small floor area can meet the operating requirements and produce UV-light irradiation cross-linked polyethylene wire and cable products. The addition of upper traction enables the conductor wire core to maintain a certain tension. In the running process, it shall be always in the center of irradiation box to ensure the best irradiation effect. The irradiation box uses a reflective focused UV light source that is uniformly configured and specially designed, and the electrical control system will ensure that the UV-light intensity and the irradiation temperature in the center of the irradiation box are in the optimum operating conditions. In addition, the efficient photo-initiation system rapidly induces cross-linking reaction of polyolefin under the UV-light irradiation, so that the irradiation equipment can reach a continuous production speed of dozens of meters per minute, and gradually cools at hot, warm and cold temperatures to ensure the stability of three-dimensional cross-linked netlike structure.
Supplier: Ultraviolet c lighting germicidal irradiation unit, ultrasonic cleaning device, air purifier solution
Buyer: Uv lighting equipment, dental instruments, manicure grinder tools
Measurement of specific gravity density of cable material by solid density meter Wire and Cable Detection Equipment digital display density measuring instrument LJ-300A is the largest digital display density measuring instrument used by a large number of people at present. Its precision is one thousandth of that. Compared with the traditional densitometer, this machine is more convenient, faster and less time. The most remarkable feature of lj-300a is that it is accurate, easy to operate and stable and durable. This digital display density measuring instrument adopts integrated injection molding measuring frame. Integrated injection molding transparent water tank, professional, convenient, anti-corrosion, anti-fall, anti-break; The suspension line in water is made of 0.5mm stainless steel material, which does not bend or deform, and does not touch the tank vertically with the suspension column. Lj-300a is an economic solid state specific weight meter, which is mainly targeted at: rubber, plastic, wire and cable, electrical appliances, sports equipment, tires, glass products, hard alloy and new materials research laboratory. Lj-300a economic-type solid weight meter is based on ASTM D792, ASTM D297, GB/T1033, GB/T2951, GB/T3850, GB/T533, hg4-1468, JIS K6268, ISO 2781, and ISO 1183... Standard specifications. We are Cable Detection Equipment Supplier
5KV Power frequency high-voltage test console Wire and Cable Detection Equipment Power Frequency High Voltage Test Console The power frequency high-voltage test console is designed for finished low-voltage cables, which is composed of the console, a 50KVA induction regulator and an experimental transformer. It has a standard capacity of 50KVA and a voltage of 5KV. The low-voltage cable can generally withstand the voltage of 3.5KV, and the equipment can withstand the voltage of 5KV. The equipment is operated by electric control. In addition, high voltage will automatically return to zero in case of cable break and give a sound-light alarm and leakage protection, so as to protect the safety of the operator and the staff to the most extent. Main technical parameters of the system: Rate capacity 50kVA/ 100KVA/ 150KVA/ 200KVA Rated input voltage 380V Rated output voltage 0-5KV/ 0-10KV/ 0-15KV/ 0-20KV/0-25KV Main technical indicators: 1. It will automatically give an alarm (sound-light) and delay in cutting off high voltage (adjustable from 0.1-1S) in case of test piece breakdown. 2. Zero potential of voltage regulator is started under high voltage. 3. The voltage regulator automatically returns to zero after breakdown, overcurrent protection and non-zero tripping under high voltage. 4. Cut off the power source after the hold-off time is up and voltage automatically returns to zero at the step-up rate. 5. The hold-off time of digital display time relay is adjustable. 6. Measurement accuracy of high-voltage output and current output is +3%. ã??ã??When low-voltage wires are used in the power frequency withstand voltage test, the equipment with a voltage of 5KV and capacity of 50KVA is usually used. ã??ã??Voltage capacity may be customized according to customer needs. We are Cable Detection Equipment Supplier
Spark Breakdown Tester Wire and Cable Detection Equipment The SPARK TESTER is designed and manufactured in accordance with Standard GB/T3048.9-94 and Standard JB/T4278.10-93 on the basis of learning from similar products at home and abroad, and is suitable for the power frequency spark test on the insulation layer of rubber and plastic wires and cables. In addition, it is known as an important test equipment to ensure the insulation quality of wires and cables.ã?? The 25KV type power frequency SPARK TESTER meets the test requirements of the new national standard GB/T3048-2007, and is a professional equipment to detect wire, cable, insulation and sheath defects. It adopts the solid state AC voltage regulation and single-chip microprocessor control technology, characterized by stable output of high voltage (subject to no grid voltage change), high detection sensitivity, good field adaptability, convenient to use, safety and reliability and novel and beautiful structure. The tester is dedicated for the dielectic strength test on finished cables of insulation wires whose test voltage value is 25KV and below. Technical indicators Operating conditions of device Mains voltage AC220V±10% Detection voltage: Continuously adjustable Bead chain of inspection electrode: ø5mm (standard nickel plated bead chain) Mains frequency 50±2Hz High sensitivity: (600 uA) Detection mode: Online detection/winding detection Ambient temperature 0~40°C Maximum number of detected cables ø100MM/150MM Indicating method of breakdown: Counting function of breakdown number and bell alarm, and the breakdown point is obviously visible. We are Cable Detection Equipment Supplier 8Zinc layer weight test apparatus Weight detection of core layer of overhead aluminum stranded wire
Electronic Scale aluminium cable steel reinforced automatic calibration Electronic Scale overload alarm Electronic Scale Features Range scale: Large LCD with white light Highly sensitive tuch-button Built-in lower lifting hook for weighing Overload protection scale Protection lock for transportation of glass sliding door FA124/FA224 machines are for export Functions Quakeproof Grade IV, adjustable weighing speed Adjustable display mode, dynamic temperature compensation, scaling within full scale Trackable and adjustable automatic zero position, automatic fault diagnosis, automatic calibration, overload protection and overload alarm function Counting and weighing function (%) g, ounce, karat and other units for conversion Weighing range: 200g Readability: 0.1mg Repeatability: â?¤±0.1mg Linearity: â?¤±0.2mg Scale size: Ï?90mm
CP-50 Wire and cable sheet-punching machine Wire and Cable Detection Equipment Cable Detection Equipment Supplier CP-50 type die punching machine is used to punch rubber, plastics, leather and other special materials into test pieces specified in various standards for trial use. In addition, it can also be used as small punch press.
Double Faced Flaker Wire and Cable Detection Equipment Cable Detection Equipment Factory Features and usages: The machine is widely used in rubber, plastics, leather, wire and cable industries and scientific research units, and is indispensable for the preparation of test pieces. It can be used to cut various test pieces with a Shore hardness above 40 degrees and a thickness of 1-12 mm. The sheet material it cuts has a smooth and flat surface; the dimensional tolerance of thickness can be controlled within ±0.2; it can be used to directly cut the test piece without need for grinding. II. Technical parameters: 1. Table width: 300mm 2. Slice thickness: 1-12mm 3. Slice width: â?¤100mm 4. Maximum feed thickness: 20mm 5. Motor type: Y100L-8 1.1KW 710r/min 380V 6. Dimensions: LÃ?WÃ?H: 625
Vernier Caliper Vernier caliper is a measuring tool for measuring length, inner and outer diameters and depth. It consists of two parts, that is, the main scale and the vernier attached to the main scale. The vernier is an integral whole if looking from the back. The main scale is generally measured in millimeter, while the vernier has 10, 20, or 50 subdivisions. According to different subdivisions, the vernier caliper can be classified into vernier caliper with ten subdivisions, vernier caliper with twenty subdivisions and vernier caliper with fifty subdivisions. There are two movable measuring jaws on the main scale and vernier of the vernier caliper, that is, the internal and external measuring jaws. The internal measuring jaw is usually used to measure inner diameter while the external measuring jaw is usually used to measure length and outer diameter. In addition, the depth gauge is connected to the vernier caliper, which can be used to measure the depth of slot and barrel. 1. Technical indicators: Measurement range: 150mm Accuracy: 0.02
Outside Micrometer With Electronic Digital Display Outside Micrometer I. Purpose of experiment Measure sample size II. Experimental device Micrometer with electronic digital display with an accuracy of 0.001mm III. Main technical indicators 1) Measurement range: 0-25mm; 2) Resolution: 0.001mm; 3) Working power source: A 1.5V button cell; 4) Operating ambient temperature: 0~+40 5) Storage temperature: -20~+70 6) Ambient humidity: = 80ï¼?. 20DQ-630 Type Four Terminal Wiring Clamp I. Overview DQ-630 type universal conductor resistance clamp is the auxiliary equipment for measuring the DC resistance of wire and cable conductors, which can be used together with QJ36, QJ57, SB2230, PC36C and other double bridge and digital bridges to measure conductor resistance. It meets the standard requirements given in GB/T3048 Test Method for Electrical Performance. The baseplate is made of aluminum alloy section, and is provided with independent clamping head on current end and voltage test end. The current-end clamping end may be used to adjust the distance with the test end (voltage clamping head) according to the sectional area of the conductor measured. In addition, its performance indicators and technical parameters comply with the requirements of relevant national standards.