Drained battery scrap (free of battery acid/fluid) including lead plates and plastic/rubber casing complete with caps. Purity : Complete Battery with full contents, except the liquid Car batteries are treated as hazardous waste. Drained / Dry Whole Intact Lead Batteries (RAINS) Lead Battery Scrap >> Drained / Dry Whole Intact Lead Batteries (RAINS) SCRAP DRAINED/DRY WHOLE INTACT LEAD BATTERIES : To be free of any liquid. Cases to be either plastic or rubber and be complete including caps. Non-lead (ni-cad, ni-fe, carbonaire, etc.) not acceptable. Seller Listings Drained / Dry Whole Intact Lead Batteries (RAINS) 6V1.3AH sealed lead acid battery. 1/Product Specification: Item No.:DHB613; Voltage:6V; Normal capacity:1.3AH/20hr; Dimension(L*W*H):97*24*52mm; Total height(with terminal):57mm; Weight:0.30kg; 2/Product Feature: (1)Maintenance-free operation.there is no need to check specific gravity of the electrolyte or add water to battery during float service life. (2)Low self-discharge rate, small internal resistance. (3)The unique construction and sealing techniques of the battery, add the ABS plastic crust that guarantee leakproof operation in and position with no adverse effect to capacity or service life. (4)With our high quality lead-tin-calcium alloy grids, it has a long usage life and deep discharge recoverability. (5)No pollution and no harm.
PET polyester chips/ PET bottle grade chips PET chip is TPA-based polyethylene terephthlic copolymer designed for various applications, especially for the bottle like drinking water & food container. It is a high molecular weight polymer with an 0.80 intrinsic viscosity. Applications: Used for packing bottles for drinking water such as pure water, natural mineral water and distilled water etc. The products are good processing performance. Mineral water, edible oil, hot fill bottle grade, food bottle grade Bottle-grade polyester chips are suitable for making the packing bottles for pure water, natural mineral water, distilled water, drinking water, flavoring and candy containers, PET sheet material etc
Bauxite Composition (DCL 01): Loss on Ignition (LOI): 17.71% Silicon Dioxide (SiO): 9.11% Iron Oxide (FeO): 10.99% Alumina (AlO): 60.14% Calcium Oxide (CaO): 0.06% Sulfur Trioxide (SO): 0.52% Phosphorus Pentoxide (PO): 0.46% Magnesium Oxide (MgO): 0.42% Titanium Dioxide (TiO): 0.81%
Cast iron t slotted floor plates. cast iron bed plates, cast iron angle plates, sintering pallets cars..
Aluminum alloy part Material ADC12 Weight 0.9kg Manufacture Process Die Casting Description Engineering Parts
Barium Hydroxide, Barium Sulfate Natural ( Barite ) , Mullite, Bauxite, Barium Chloride, Lithopone, Titanium Dioxide And Barium Carbonate.
We manufacture the drill stem testing tools for the oil well testing service, the testing string include rtts packer, rtts circulating valve, rtts safety joint, select tester valve, omni valve, bj jar, slip joint, retrievable bridge plug, production packer etc. Also we supply the surface testing equipment to match our dst tools, such as flowhead(surface test tree), manifold, plug valve, all the related flange and pipeline etc. The material is as per the standard mr 0175 More information about the tools, contact us freely
Scrap.
aluminium plate Material Cast aluminum Material grade aluminum alloy ADC12 Process die casting machining Description Engineering Parts
Copper scraps.
Iron And Steel Products, Including Stainless Steel, Carbon Steel, Galvanized Series, Colour Coating And Aluminium.....
Steel product, aluminium alloy.
Qj-002 wire stripper machine Voltage:110v/230v Power: 1.5kw Weight: 69kg Mea.: l540f¯w410f¯h500 wire range:2mm-40mm Daily capacity: 200kg~1000kg.
918-ka Voltage:220v/380v Power:2.2kw Weight:80kg Mea.:l570xw570xh840 Wire range:1-35mm Daily output:400-1000kg.
QJ-400 wire recycling machine This machine with PCL control system,can recycling 99%copper from scrap copper wires/cables,the wire or cables' diameter should be below 20mm. No packing Mea.: L2700xW1900xH2300 Voltage:380V Power: 16KW Weight:1.2t output:150~200kg/h.
Junk Trapper and catch One Salvage cup usually pick up on the drill bit or milling tool, with its collection of cups will circulate in borehole couldn't recovered heavier small falling objects.It can also be used for casing scraper above, make the casing scraper operation is fast and clean. TwoSalvage cup salvage fragments falling object is mainly used in drilling process, such as cemented carbide teeth, bit bearing, etc.It is to keep the bottom clean, improve the service life of drill bit, drill bit to reduce and prevent accidental damage plays an important role. Structure Salvage cup is mainly composed of spindle, wiper block, outer tube, the joint and so on, as shown.Because the manufacturer is different, although its structure is similar, but not exactly the same, can be selected according to downhole conditions.
Introduction Grand-Mix (GM) consists of the latest generation scraper, brush and high capacity magnet, combined them into a simplified and rugged tool, which has an integral magnet section to capture ferrous debris, scrapers to dislodge difficult to-remove debris, and brushes to disturb the sheath and any other fluid build-up on the inner wall of the casing or liner. The tool can be run in the inner production riser, casing, and liner to remove a combination of scale, rust, mud film, drilling debris, ferrous debris, and pipe dope. Features One tool carries scrapers, brushes, or magnets on the same mandrel. Large flow area between magnets to capture large debris. Brush component can be readily redressed at remote locations. Available with any tubing connection to run directly on the completion tubing. Application the Grand-Mix can be configured for any Casing and Tubing combination with matching metallurgy and connections
The company has introduced the original imported carbide cutting teeth, which can be used for various types of downhole cutting and milling operations. We are able to provide all sizes and shapes of clastic milling, all sizes of milling shoes and different diameters of milling cone or drill string milling. This type of shoe is ideal for metal debris that have fallen into the well, such as bit cone, tong dies, packers, and sleeve milling stuck or cementing pipes.
Introduction The RIDGE Sharp-Razor Casing Scraper developed for use in perforated casing or liner to remove perforation burrs and to ensure the safe passage of completion equipment. Provides advanced wellbore cleanup in the post-perforating well phase, where a high degree of casing or liner ID smoothness through the perforated interval is required . Completely removes perforation burrs, preventing damage to completion equipment, including expandable screens/expandable pipe used in complex/smart completion . Features Robust enough to remove bigger and large volume burrs, cementing accessories. Clean by rotation and up/down pipe movement. Supplied with drill-pipe box up/pin-down connections . Available in all common casing/ liner sizes. Application Mainly used in perforated casing or liner to remove perforation burrs and to ensure the safe passage of completion equipment
Introduction The HD Sharp-Razor Casing Scraper consists of: a high-strength, one-piece mandrel and is designed to meet the demands of Complex wellbore cleanups. By allowing a higher RPM and weight-on-bit rating than the standard Shape-Razor device. The HD Sharp-Razor Casing Scraper unit is well suited for drilling up cement accessories commonly found inside the liner or casing. Features More effective, robust and safer to use in a ll wellbore-cleanup of casing-scraping operations. Higher RPM and weight-on-bit rating than the standard Shape Razor. 360�coverage, and equal cleaning force at all angles of well inclination. Suitable for severe environment, HTHP-compatible and is not vulnerable to chemical or acid attack. Available with all API and premium drill pipe connections. Application Removes cement sheath, burrs, and pipe scale Pre-completion wellbore clean-up Workovers and sidetracking Abandonment Drilling / milling cement plugs
