Aluminum pipe wrench, hammer, cutting tool, wrench.
Cold work tool steel, hot work tool steel, plastic mould steel, high speed tool steel.
Steel tool, mould steel.
Tool steel, mould steel.
Harmonic scalpel , hand piece , ultrasonic shear.
Tools.
Gas analyzer, laser gas analyser.
Overview High pressure wireless phase detector is a dedicated test high-voltage nuclear phase tester based on national power industry standard norms and market demand, and high-voltage nuclear photographic applies to detecting the two-sided circuit breaker of the ring or dual power supply power network closed loop circuit breaker. Whether it is produced in the same phase. Before the closed loop two power supply, you must perform a nuclear phase, otherwise a short circuit can occur, suitable for the 6KV ~ 220KV transmission line with the electrical core, the sight can reach 200 meters, and the wall can be used, and it has a test function. Wireless high-pressure cores use wireless transmission technology, safe and reliable operation, easy to use, in line with national electric power safety equipment quality supervision and testing standards. Compared with the cable core, it is the main advantage that the lead wire connected to both grids (power supply) is removed, and the safety is used to improve the security in a manner that is not subject to any terrain and facility architecture. Technical parameter: Phase difference Error 5 Frequency accuracy 0.1Hz The voltage grade measured by this product is 6kv-220kv Transmission distance of the transmitter and receiving host
MLC-V235 Continuous Casting Mold Level Automatic Measurement System Overview The automatic control for the molten steel level of the mold is one of the key technologies of continuous casting production. It is very important to reduce the labor intensity of workers, improve production efficiency, improve the quality and output of casting billet, reduce overflow and breakout of steel and improve the management level of steelmaking and continuous casting. The molten steel is poured into the mold. In order to prevent overflow, the molten steel level must be kept stable. Otherwise, during the casting process, if the level will fluctuate too much, and slag will be involved, forming surface slag inclusion on the surface of the casting billet, affecting the quality of the billet. The test points out that the relationship between the level fluctuation and the depth of casting billet surface slag inclusion is as follows: The experience has shown that surface slag inclusions can be eliminated when the level fluctuation is within 10mm. At the same time, if the level fluctuation is more than 10mm, the rate of longitudinal cracks on the casting billet surface is 30%. It means that the level fluctuation directly affects the surface quality of the casting billet. The principle of the system The eddy current type molten steel level gauge is the key to the system. The system operates reliably and has excellent performance: high temperature resistance, strong anti-interference ability, fast dynamic response (lag time
A commonly used material, qualified quality, reasonable price, Quick service. 1.Electric furnace and electro - slag steel 2.We can make large - sized materials. 3.The factory has got more than 10 years production experience Specification Round bars dia 50mm-340mm length 14000mm Flat steel thickness 20mm-300mm width 1600mm length 13500mm Hot work mold steel (forging) The similar grades of Foreign countries Gb 4cr5mosiv1 Aisi H13 Jis Skd61 Din 1.2344 Ks Chemical Composition (gb) % C Cr Si Mo V Mn P S 0.32-0.42 4.75-5.50 0.80-1.20 1.10-1.75 0.80-1.20 0.20-0.50 Performance H13 die steel has excellent heat strength and hardness, high abrasive resistance and toughness, good hardening properties; high dimensional stability at heat treatment, also pretty good property of resistance to cold and hot fatigue. Applications Used for making hot squeezing mould, forging mould, hot extrusion dies, heat-resistant steel . Nude packing or packed with steel wires
Specifications Din 1.2316/420/s136h plastic mould steel 1.Rolled/forged 2.Iso9001:2008 3.100% ut 4.T:12-600mm w:100-1200mm l:2.0-5.8m Detailed product description 1. Plastic mould steel s136h/din 1.2316/aisi 420/3cr17nimnmo 2. Chemical composition: C Si Mn Cr S/p Mo Ni 4. Regular specifications: Rolled flat steel (thickness*width*length) mm Hot-rolled round steel (diameter*length) mm 12-70x155-610*2000-6000mm Dia:12-300mm*2000-6000mm Forged flat steel ( thickness*width*length) mm Forged round steel (diameter*length) mm 35-500*50-1200*2000-6000mm Dia: 50-500mm*2000-6000mm 5. Application: used for plastic mould which needs anti-corrosion and mirror polishing. 6. Payment: l/c at sight or t/t. Unpacked or according to the customers' requested
Specifications Large stock Competitive price Good quality 1, grade:cold work mould steel(d2/din1.2379/cr12mov1). 2, specification:dimension:20-500mm*50-1200mm. 3, chemical composition: C=1.40~1.60, mn=0.30~0.50, si=0.30-0.50, s 0.025, cr=11.0~13.0, mo=0.70~1.20, v 0.08 4, annealed hardness:hbs=207-255 5, application:used for various high precision, long-life cold work mould and tool, like:punching mould could squeezing mould. 6.Payment terms:30% t/t deposit in advance Unpacking or customized packing
Very good toughness by ESR treatment, bear higher temperature with good cutting and smoothing natures to safeguard its long usage; Applied in aluminum, zinc and copper-based alloy pressure and forged moulds or other hot forged moulds like shear blades, smoall size steel is the ideal material for making mandril and ejector sleeve as well as for making frequently used plastic moulds.
Very good toughness by ESR treatment, bear higher temperature with good cutting and smoothing natures to safeguard its long usage; Applied in aluminium, zinc and copper-based alloy pressure and forged moulds or other hot forged moulds like shear blades, small size steel is the ideal material for making mandril and ejector sleeve as well as for making frequently used plastic moulds.
Product description The Portable single-phase electric meter Test Equipment is used for grid corporation of measurement and energy test center, management department of power supply bureau, national energy measurement of testing authorities, and also used to test each kind of single phase kWh meter of industries and mining enterprises as well as electric meter manufacturers. Meanwhile, the calibrator also can be used as one high precision standard power source, ac voltage source and current source. Technical index Electrical parameters Accuracy class 0.05%, 0.1% Power Supply One Phase AC 100-265V, frequency 50/60Hz. AC Voltage Output Range 57.7V, 100V, 220V, 380V; max 500V Adjustment range (0-120)%RG(1) Adjustment 0.01%RG, 0.1%RG, 1%RG, 10%RG as optional. Stability 0.01%/120s Electrical parameters - continued Distortion 0.2% (Non-capacitive load) Output load max 25VA Measuring accuracy 0.05%RG AC Current Output Range 200mA, 1A, 5A, 20A, 60A(100A) optional; max 120A Adjustment range (0-120)%RG Adjustment 0.01%RG, 0.1%RG, 1%RG, 10%RG as optional. Stability
Product description Single-phase electric meter field calibrator is suitable to test various types single phase meters on site and can also be used to test alternating current parameters. Feature 1. Current clamp and meter combined together, colorful and touch-screen display; 2. One AAA Li-battery can continuously working 4 hours; 3. Wide voltage, current measurement range, voltage range: 15-300V, current range: 0.05-120A; 4. Display all the measuring parameters in one screen; 5. Current clamp has automatic compensation function, 0.2% class accuracy; 6. Current clamp has automatic calibration function; 7. Integration design of the meter and clamp; 8. 16bit high accuracy AD switch 32 bit ARM processor core. 9. Automatically record and save 999 groups calibrate data; 10. Micro-multifunction optic sampler Technical index 1. Manual/automatic test inductive single phase meters; 2. Manual/automatic test electric single phase meters; 3. Measure virtual value of alternating voltage (15 300Vrms); 4. Measure virtual value of alternating current (50mA 120Arms); 5. Test parameters: active power, phase angle of voltage and current, frequency and etc; 6. Automatic store testing data, and 999 group test results can besaved.
Product description The Single-phase capacitance and inductance tester is specially developed for the problem of measuring the capacitance value of the capacitor on the substation. Technical parameters Instrument measurement range and accuracy: a. Capacitance measurement (1) Measurable capacitance range (2) Measurable capacity range (3) Measurement accuracy (4) Resolution b. Current measurement (1)Current measurement range (2)Measurement accuracy (3)Resolution: 0.01A c. Inductance measurement (1)Inductance measurement range: small inductance mode 0.1mH 5mH large inductance mode 5 mH 50H
Overview: Generator Rotor AC Impedance Testing Instrument is a special instrument for determining whether the turn-to-turn short circuit exists in the generator rotor winding, and can manually and automatically (unidirectionally or bidirectionally) measure many parameters of the generator rotor such as voltage, current, impedance, power and rotating speed.Generator Rotor AC Impedance Testing Instrument is the latest enhanced AC impedance tester launched by our Company. The instrument adopts the state-of-the-art high speed microprocessor technology with more powerful functions, preferable performances and more convenient use. The Tester has a series of characteristics such as high reliability, easy operation, high test precision, being compact and lightweight and etc., and currently is in the domestic leading level. Major Technical Indicators Temperature: Relative Humidity: 0 1% FS+2d 0.1 0.5% FS+2d Frequency 40-75HZ 0.2% Weight 5kg
Product description SF6 3in 1Comprehensive SF6 Analyzer can be used to measure the purity of the product, the product will be used to achieve the function of two instruments to achieve a single instrument. A field survey, the most complete two indicators of detection, greatly save the gas in the device, a measure to save 1/2 gas consumption, while reducing the user's workload, improve the work efficiency. SF6 gas comprehensive tester Purity analyzer Technical index SF6 Purity (optional) Measurement range Precision SF6 Decomposition Measuring gas type and range CO: 0-1000ppm Sensitivity 0.1ppm Response time Sampling Built in regulator valve, filter, electronic flow meter Working power source AC / DC, built-in large capacity rechargeable battery, full of continuous working hours Weight About 3.5kg SF6 gas comprehensive tester Purity analyzer The product can be broken down, the purity measurement in one. A measurement can be completed a number of indicators. The full import of precision dew point measurement sensor, automatic zero calibration, anti oil, anti drift. The electronic flow display, power display. The file system support, data storage, printing. The instrument is a self diagnostic function, intelligent power display.
Product Introduction: SF6 intelligent micro water quality tester is developed and designed according to the national power industry standard DL/ t506-2007 insulation gas humidity measurement method for sulfur hexafluoride electrical equipment and adopts the imported high-precision dew point sensor and new digital circuit control technology. It is a high-precision intelligent instrument to measure the trace moisture content in SF6 gas. This instrument adopts intelligent self-calibration technology wide measurement range fast response high accuracy good linearity dynamic display of measurement curve. At the same time the instrument also has an automatic dryer which can greatly reduce the measurement time. Technical Parameters:
