Please click here to check who's online and chat with them.

Find Verified Plastic Items Suppliers, Manufacturers and Wholesalers

Top Supplier Cities : Shenzhen   Dongguan   Guangzhou  
May-10-20
 
AHP03 series single drive single acting
MAX.OUT PRESSURE: 8800PSI
DISPLACEMENT VOLUME/CYCLE: 1.0ML
MAX.FLOW RATE:0.64L/MIN
INLET PORT:3/8 FNPT
OUTLET PORT:1/4 FNPT
Jun-01-20

Ground Straight Rods

$1.00 - $100.00
MOQ: Not Specified
 
The advantage of the ground straight rods
1. Material: 100% virgin raw material with submicron grain size;
2. Grade: Various grades for choice;
3. With strict tolerance extent control, the tolerance can reach +/-0.01mm;
4. Precision Ground and polished;
5. Product Types available: Blank rods, ground rods, thread rods, rod with one hole;
6. High wear resistance, high hardness and impact toughness;
7. Advanced technology, automatic pressing, HIP sintering and precision grinding;
8. Having very good mechanical &chemical stability;
9. High quality & reasonable price & fast delivery & best service.
May-11-24

Special Custom Pipe

$20.00
MOQ: Not Specified
Supplier From Wuhan, Hubei, China
 
Heat shrink tubing can combine various properties in a unique way
Taken together, include: outstanding electrical characteristics, excellent
Chemical and solvent resistance, high purity, lubricity and penetration
Out of reliability.
The double-layer fluoropolymer PTFE/FEP tube consists of a PTFE heat shrinkable outer layer and an FEP inner layer
It is widely used and can be used with wires, cables, connectors, connectors, terminals, etc
Tightly combined, with the role of moisture-proof. When the covered part is heated,
PTFE contracts tightly onto the inlay while FEP melts and flows onto a solid or near-solid package, forming an extremely tight bond that can withstand maximum extension or vibration stress. double layer heat shrink tube has all the electricity of PTFE
Gas, chemical and mechanical properties. Operating temperature up to 230 degrees.
Our roll shrouds extend the life of the roll, enhance reliability and enhance the quality of the product. A little heat can be applied to the roll to form a layer of high strength, armor like a strong sheath, which protects the roll from chemical solvents, acids, shocks, wear, heat and moisture. It also eliminates the problem of viscous accumulation.
During processing, only a convenient heat source, such as a heat gun, can be quickly and easily condensed onto the roll surface, and can be cleaned with solvents or reagents.
May-11-24

Ptfe Tubing

$15.00
MOQ: Not Specified
Supplier From Wuhan, Hubei, China
 
If your temperature requirements are up to 260�°C (500�°F), PTFE tubes (polytetrafluoroethylene) are recommended. When terminated, it can be prevented from "melting" by soldering iron. Due to its excellent dielectric properties, it is widely used in electronic and electrical services. Another major advantage of PTFE tubes is their non-stick properties, allowing the material to be transported with minimal fluid resistance. Note, however, that PTFE reacts with fluorine, molten sodium hydroxide, and molten alkali metals.

We have a full range of PTFE extrusion tubes for protecting wiring or transporting fluids in critical applications.

PTFE tubes are available in a variety of configurations and custom designs. PTFE tubes have inherently excellent chemical resistivity and low coefficient of friction, and their performance is superior to that of glass and graphite, making them ideal materials for fluid transport.

PTFE tubes can be used with almost all industrial solvents, chemicals and corrosive materials, and can be used in high-temperature processes. It can be steam sterilized without affecting its physical properties, such as surface hardness, elongation, deflection life or load deformation.

PTFE tubes are usually translucent white, however, the whiteness varies depending on batch and wall thickness size. Colored PTFE tubes are also available and are often used to simplify tube wiring during system installation.
May-11-24

Etfe Tubing

$15.00
MOQ: Not Specified
Supplier From Wuhan, Hubei, China
 
ETFE is a fluoropolymer that is chemically and structurally similar to polyolefins (such as polyethylene) and therefore has higher wear resistance, impact resistance and crushing resistance than its perfluorinated (perfluoropolymer) counterparts -PTFE, FEP and PFA.

ETFE tubes are commonly used in wire harnesses, outer film applications that require weather resistance, and tank linings that require special chemical and wear resistance. Its high tensile strength at 25 ° C also leads to higher operating pressures at that temperature.
20 Plastic Items Suppliers
Short on time? Let Plastic Items sellers contact you.
May-11-24

Pfa Tubing

$15.00
MOQ: Not Specified
Supplier From Wuhan, Hubei, China
 
PFA tubes (perfluoroalkoxy) have excellent cracking and stress resistance and can be used when more demanding mechanical properties are required.
PFA tubes are the product of choice for applications involving extremely high chemical resistance and exposure to high temperatures.

If greater clarity, flexibility and higher continuous use temperatures are required, PFA tubes are preferred.
PFA tubes are rigid and have a long bending life (up to 500�ºF) and have all the conventional properties of PTFE.

In the semiconductor and pharmaceutical industries, PFA HP (High purity) tubing is used in fluid handling applications that require very low levels of chemically extractable matter.
May-11-24

Fep Tubing

$15.00
MOQ: Not Specified
Supplier From Wuhan, Hubei, China
 
FEP tubes (polyperfluorinated ethylene propylene) are the preferred material for the production of small diameter tubes of continuous length. FEP sacrifices some heat resistance, but its chemical and dielectric properties are similar to PTFE. Tayak FEP tube is a transparent tube that is an economical choice for applications requiring chemical resistance and resistance to high and low temperature exposure. The excellent clarity of Taiyue FEP tubing makes it ideal for applications such as viewing glasses and flow monitoring. Taiyue FEP tubes have a slightly higher coefficient of friction, lower continuous use temperature, and are more transparent than PTFE. Tai Yue FEP pipes also have better gas and vapor permeability and have excellent UV transmittance ratings.
FEP tubes are available in a variety of standard sizes, with custom sizes available on request. FEP tubes are also available in flexible tubes that can be ordered in a variety of size lengths, special sizes and colors to meet your needs.
Sep-24-07
Supplier From Wuhan, China
Jul-05-07
Supplier From Wuhan, Hubei, China
Apr-04-23
Supplier From Wuhan, China
Jun-13-17
Supplier From Wuhan, Hubei, China
Aug-08-17
Supplier From Wuhan, Hubei, China
Oct-19-16
Supplier From Wuhan, China
Jul-02-20
Supplier From Wuhan, China
Jul-06-16
Supplier From Wuhan, Hubei, China
Jun-03-21
Supplier From Wuhan, Hubei, China
Feb-28-23
Supplier From Wuhan, Hubei, China
Aug-19-08
Supplier From Wuhan, Jinshan Avenue, China
Apr-24-22
Supplier From wuhan, Hubei, China
Aug-27-19
Supplier From Wuhan, Hubei, China
20 Plastic Items Suppliers
Short on time? Let Plastic Items sellers contact you.