Wood crusher is the tiny material, like the beanpole, digs flowered, the diameter centimeter below small branch, the corn straw and so on disposable to crush the molecule the small grinder.
Wood crusher can not be bigger than 80mm each kind the branch, the tree root, the slab mill culls and so on through this machining to granulated, each hourly output may amount to 350 kilograms.
MODEL NUMBER GL-I GL-II
productivity 400kg/h 600kg/h
The diameter of the material(mm) í_íT10 í_íT30-50
Motor power 7.5kw 11kw
Net weight 500kg 650kg
Out size(mm) 1250*800*900.
Sawdust drying machine merit is the direct heating, dries quickly, may fold the installment, saves the space. Its principle is lets the moist raw material and the high temperature air current mix walks, separates finally through the separator the moisture from raw material.
MODEL NUMBER GL-H1 GL-H2
productivity 600-800kg/h 1000-1400kg/h
The temperature of the heating air 180íµ-250íµ 180íµ-250íµ
Motor power 5.5kw 7.5kw
weight 1600kg 2600kg
Size of the machine 15*1.0*2.0m 12*2*2.4m.
The animail feedstuff crushing and mixing machine is used to first crushing the grains then mixing the powders for animal feed.
The excellence of the animail feedstuff crushing and mixing machine:
NO.1 Mixed high-speed smash
NO.2 no dust and low noise
NO.3 Failure rate is low, the motor difficult to burn.
Model GL-S500 GL-S800 GL-S1000 GL-S2000
Motor ofcrusher(kw) 5.5 7.5 7.5 11
Motor of Mixer(kw) 3 3 4 4
Productivity(kw/h) 500-1000 800-1000 1500-2000 3000-4000
Dimensions(cm) 200*105*230 215*116*260 220*130*290 270*170*306.
Flat die feed pellet machine is designed for small farms, small and medium sized pellet feed processing equipment. And be able to process grass industry, straw particles and particles of inorganic fertilizer. Crude fiber granulator such as: sawdust, rice husk, cotton stalks, cottonseed skins, weeds and other crop residues, waste, plant waste, low bonding, it is difficult molding material granulating.
Sawdust machine is designed and developed according to industrial requirement. It belongs to wood crushing and pulverizing equipment. It has a reasonable design and stable structure. It is a safe, endurable, efficient sawdust making machine. Besides, it is highly eco-friendly and saves energy in order to reduce the production cost.
Wood grinder machine uses blade cutting and high speed airflow crushing to reduce the wood into sawdust. While the blades inside are cutting with a high rotating speed, the rotor generates strong airflow which rotates at the same direction as rotor. As the blades rotate and cut, the airflow crushes the material at the same time. That way, the sawdust making efficiency can be increased greatly.
Applicable Materials: MDF/ wood/ wave panel/aluminum composite panel/ inscribed wooden slip /PVC board etc.
Applicable Industries: Wood Furniture(wood door/ folding screen/ artificial fans & windows/ game cabinet/ mahjong table/ computer desk etc) large scale architecture mould/ aerospace wood mould/ automotive foam mould/ musical instrument tri-dimensional engraving/ decoration/upholster(handwriting\ art frame)and other related industries.
Features:
1. Precision mould casting, high rigidity and small accumulated error.
2. Large power spindle cuts easily and quickly.
3. High speed (curve and straight line shares same speed, and curve line is more smooth. ), high efficiency. Running speed is more than 14 m/min. And 1325M\1530M can even reach to 35 m/min.
4. Two motor-driver with distinctive double rack transmission, making it work steadily for a long time.
5. Continue to engrave after point-break and bits/knife-breaking. Hold more than 9 points.
6. Professional engraving software. Such as CorelDraw, Type3, Artcam, Castmate, Proe, Artcut and other CAD/CAM software.
Technical Specifications:
Model: BX-1325/1530/1325M/1530M
X/Y axis working area: 1300*2500/1500*30000mm
Z axis working area: 120mm
Platform Size: 1500*3100/1700*3600mm
Max. Working Speed: 14/35m/min
Max. Engraving Speed: 12/20m/min
Type of Clamp: Vacuum (1325M/1530M)
Interface: USB (1325M/1530M)
Resolution: 0.01/0.03mm
Repositioning Accuracy: 0.05mm
Command: G Code*. U00*. Mmg*. Plt
Software Surroundings: Windows98/2000/XP
Power: AC220V/50Hz
Spindle Power: 1.5/2.2/3/4.5Kw
Spindle Speed: 0-24000rpm
Work Mode: Stepper.
Accessories Chosen By Customer:
Large Power Spindle/ Imported Spindle/ Multi Spindle/ DSP Handle With USB Interface/ Vacuum System/ Servo System etc.
(1). The portable edge bander can finish wooden edge frames at straight edge, inside the arc, outside the arc, curve and circle, the radius of the inside arc above 15mm
Technical parameters Mz73216
The max drilling diameter 35mm
The max drilling depth 60mm
Vertical distance 130-3250mm
Driller numbers 2axles*6line
Running speed 2840r/min
Motor power 1.5kw*6
Air pressure 6-8kg/cm2
Overall sizeú¿l*w*hú¬ 4600*1500*1600mm
Wood brushing machine
Main uses:
Solid wood grain highlighting, with steel and nylon wire brushes,
Wpc decking profile brushing, with steel and nylon wire brushes
Wood profile polishing and denibbing, with sandpapers
Machine features:
Centralized control panel
Steel wire brush or roller, nylon brush rollers or vertical wire disc, work together or separately
Fine adjustment and digital display of table openings
Hold-down rollers and feed-in table height adjustment
Rotate speed of the brush and feed speed controlled by invertor
Modular configuration
Easy exchange of brushes
Max. Working width include: 600mm; 800mm;1000mm;1300mm;1600mm or others
Working length: more than 400 mm;
This dry type grinding is designed in order to achieve the no.3, no.4, hairline finishing with abrasive belts for metal sheet surfaces grinding or finishing or brushing or polishing (as stainless steel sheet aluminum sheet or coil). Single or multiple abrasive belts of variable grain patterns adaptable.
This kind of machine always work with conveyor bed, precisely up or down on 4 pneumatic spindles, dust extraction funnels.
Max. Working width include: 600mm;800mm;1000mm;1300mm or others
Working length: more than 400mm; working thickness: 0.5-30mm; feed speed: 5-30m/min
The processing of this machine is:
Metal sheet--conveyor bed---grinding machine---conveyors---film laminating machine(laminate protective film on the metal sheet in order to protective the sheet )--metal sheet.
This kind of machine include msrr( two abrasive belt ), msrrr(3 abrasive belt ), msrrb(2 abrasive belt and 1scrotch-brite rollers ) three models. Depend on your sheet roughness and effect you required. You can choice different model..
16 of the ms16rr meaning max width is 1600mm.
13 of ms13rr meaning max width is 1300mm.
Technical parameter
Machine modelms16rrms16rrrms16rrb
Work piecethickness0.5-30mm0.5-30mm0.5-30mm
Maxlength320mm320mm320mm
Width40-1600mm40-1600mm40-1600mm
Abrasive belt linear speedabout 14 m/sabout 14 m/sabout 14 m/s
Size(wxp)1630x1900mm1630x1900mm1630x1900mm
Conveyor beltfeed speed5-20m/min5-20m/min5-20m/min
Size(wxp)about 1600x3350mmabout 1600x4330mmabout 1600x4330mm
Motor
(kw)no.1 main motor30.0kw30.0kw for no.4
2.5kw for hl optional30.0kw
No.2 main motor30.0kw30.0kw
No.3 main motor15.0kw
Feed-in motor4.04.04.0
Lifting motor0.370.370.37
Airconsumption volume about 0.66m3/minabout 0.76m3/minabout 0.76m3/min
Working pressure0.55mpa0.55mpa0.55mpa
Dust exactorwind volume6500 m3/h8500 m3/h8500 m3/h
Pressureabout 2300paabout 2300paabout 2300pa
Wind speed25-30m/s25-30m/s25-30m/s
í= used for plastic and aluminum profile cutting angel between -45 degree, 45 degree, 90 degree. Feeding in a liner way ensured ití»s stability. Machine guide adopted imported linear bearing system, ensured high cutting precision.
Dimension of sliding table 3200ß370mm
Cross cut capacity 3200mm
Width of cut between saw blade and rip fence 1250mm
Saw bladeª¦ 300mm(ª¦250-ª¦300)
Height of cutª¦300mm 80mm
Height of cut with saw blade ª¦300mm at 45 55mm
Speed of main saw blade 4000/6000rpm
Spindle diameter 30mm
Tilting saw blade 0-45
Main motor 4kw
Scoring saw blade 120mm
Speed of scoring saw blade 8000rpm
Spindle of scoring saw 20mm
Scoring motor 0.75kw
Weight 700kg
Overall dimensions 3250ß3050ß900mm
Dimension of sliding table 3000íß370mm
Cross cut capacity 3000mm
Width of cut between saw blade and rip fence 1250mm
Saw bladeª¦ 300mm(ª¦250-ª¦300)
Height of cutª¦300mm 80mm
Height of cut with saw blade ª¦300mm at 45íp55mm
Speed of main saw blade 4000/6000rpm
Spindle diameter 30mm
Tilting saw blade 0-45íp
Main motor 4kw
Scoring saw blade 120mm
Speed of scoring saw blade 8000rpm
Spindle of scoring saw 20mm
Scoring motor 0.75kw
Weight 700kg
Overall dimensions 3050íß3050íß900mm
The chippers can be used to cut logs, branches, slab, waste veneer, bamboo, cotton stalks, and other non-wood fiber stems into dimensional chips which are the essential material for the production of particle board, fiberboard and paper pulp.
The chippers, boasting advanced structure and wide adaptability, can produce chips of high quality. They are easy to operate and maintain.
The chipper is made up of machine base, rotor, upper and lower feed roller, feed belt conveyor, hydraulic system, etc.
This series of machine can produce chips of high quality. They can be used in paper mill, particle board plant, fiberboard plant and chip production bases. They can cut logs and small wood into high quality chips with even length, smooth chip cut and uniform chip thickness. They can also cut branches and slabs.
This chipper consists of frame, knife disc, feed and discharge spout, case and electrical control system, etc.
The chips length is adjustable in accordance with the requirement of the paper pulp, particle board and fiber board industries.
Compact in structure, easy to operate, high capacity, excellent production and low energy consumption, which make the machine the ideal equipment for chip production industries.
5054 Wood Raw Material Processed Related Machinery Suppliers
Short on time? Let Wood Raw Material Processed Related Machinery sellers contact you.
