Description Micro air blown fiber optic cable is mainly used in access network and metropolitan area network. By air blowing installation technology, without excavation surface in tiny pipe installation, also can be installed in the existing cable pipe,save pipeline resources, meet the real time capacity of the network. We communication provides the micro optical cable technology can reduce the early stages of the fiber optic cable construction cost,increase investment according to the demand of the network, to speed up the return on investment, is an good solution of FTTH. Note: 1. Cables can be supplied with a range of single mode or multimode fibers. 2. The dimensions and raw materials can be designed according to the demand of the customers. 3. Standard Reel Length: 3000m/reel: other lengths available on request.
Description: The ST fiber patch cord use a long 2.5mm diameter ceramic ferrule (or stainless alloy / plastic ferrule). It mates with an interconnection adapter and is latched into place by twisting to engage a spring-loaded bayonet socket. It is the most popular connector for multimode fiber optic LAN applications Features 1. Compliance with IEC, JIS, Telcordia 2. Twist-lock bayonet coupling mechanism which ensures quick, highly repeatable, low-loss connections 3 Simplex, duplex, and multi-fiber assemblies in standard and custom configurations 4. Single mode and Multimode 5. PC finish Applications 1. Premise installations 2. Telecommunication networks 3. Metro networks 4. Local Area Networks (LANs) 5. Data processing networks 6. Instrumentation Our Fiber Patch Cord and Fiber Pigtail range offers choices of any length, connector types and either PVC or LSZH sheath, All of our cable assemblies are composed of our top quality Ceramic Ferrules and Fiber Connectors housings ensuring a stable performance at a high quality level. Besides standard Fiber Patch cord, we also offer other types of Fiber Patch cord assemblies,Armored fiber patch cord, Waterproof fiber pigtail for different applications.
Description: GJDFBV flat ribbon cable uses fiber ribbon as optical transmission medium, covered with aramid yarn as strength member, then extruded with a PVC sheath. Other sheath materials, like LSZH and TPU, are available on request. Application : 1. Ribbon fiber flexible connection jumper 2. Various indoor cabling solutions. Especially used in good laying conditions. 3. Interconnection between apparatuses Note: 1.Cables can be supplied with a range of single mode or multimode fibers. 2. The dimensions and raw materials can be designed according to the demand of the customers. 3. Standard Reel Length: 2000m/reel: other lengths available on request.
Description: Composite or Hybrid Cables are cables that have a number of different components laid up within the bundle. These types of cables allow for multiple transmission paths by various components, whether they be metal conductors or fibre optics, and allow the user to have a single cable, therefore reducing the overall cost and lead time for installation. Application: 1.Used in outdoor applications that require both optical fiber and copper wire elements for communication and power 2.Copper wire can power remote electronics used in fiber optic communications 3.Copper wire can also be used for low data rate data transmission 4.Deployable cables have been used in network and private broadcast applications around the world 5.Cables can be designed for your custom applications Note: 1.Different conductor specification can be make as required. 2.Different Fiber specification can be make as required.
Applications: 1.Telecommunication Network 2.CATV Network 3. Local Area Network 4.Active device termination 4.Data system networ Features: 1.Compliant with: IEC, JIS, Telcordia 2.Customer length 3.Minimum loss
Description: SC-LC/PC multimode duplex fiber optical patch cord 1. CE,RoHS,ISO9001 2. High reliability,low insertion loss 3. 100% Manufacturer 4. IL=55d 5. full tested for all of productes customersâ?? ordered 6. free samples provided Features: 1.Using high precision ceramic ferrule 2.rubbing exactitude and testing completelly 3. low insertion loss and high return loss 4. high stability and repeat 5.be according with the telcordia GR-326-CORE standard 6.ferrule:excellent quality and high intensity zirconium dioxide ceramic ferrule Application 1.Telecom Network 2.LAN and WAN 3.CCAV and cable TV 4.Multimedia 5.Active device termination 6.Testing equipment 7.Data processing system 8.Premise installation
3g-sdi fiber optic extender offers the digital transmission of fully uncompressed sdi (270mbps), hd-sdi (1.485gbps) , 3g-sdi(2.97gbps)by single fiber overbroadcast quality with audio, rs485/rs232/rs422 serial data, loopback output and ip ethernet transmission. It is broadcasting quality, could compatible with asi, ts stream.
Plano-convex lenses are useful for a wide range of applications. These lenses are manufactured from BK7A grade A (or customer design) optical glass and are supplied uncoated. Anti-reflection coatings are available as listed earlier in this section. To order an anti-reflection coated lens simply append the wavelength in nanometers to the product number. These lenses may also be used as mirror blanks if a convex surface mirror is required. When used to focus a collimated beam, the light should be incident on the curved surface of the lens. These plano-convex lenses may be combined with other lenses to form compex imaging systems.
Parameter: Item PLCX, PLCC, BICX, BIXX, CXCC, DOUBLET Material BK7 etc. Design Wavelength Customer design Dimension Tolerance +0/-0.05mm Thickness Tolerance +/-0.1mm Surface Quality 40-20 or better Surface Figure Sph surface: Lambda/4 or better @632.8nm Center Error ETV better than 0.01mm Clear Aperture 90% of diameter Bevel Protective bevel Coating BBAR or customer design
Plano-convex lenses are useful for a wide range of applications. These lenses are manufactured from BK7A grade A (or customer design) optical glass and are supplied uncoated. Anti-reflection coatings are available as listed earlier in this section. To order an anti-reflection coated lens simply append the wavelength in nanometers to the product number. These lenses may also be used as mirror blanks if a convex surface mirror is required. When used to focus a collimated beam, the light should be incident on the curved surface of the lens. These plano-convex lenses may be combined with other lenses to form compex imaging systems.
Plano-convex lenses are useful for a wide range of applications. These lenses are manufactured from BK7A grade A (or customer design) optical glass and are supplied uncoated. Anti-reflection coatings are available as listed earlier in this section. To order an anti-reflection coated lens simply append the wavelength in nanometers to the product number. These lenses may also be used as mirror blanks if a convex surface mirror is required. When used to focus a collimated beam, the light should be incident on the curved surface of the lens. These plano-convex lenses may be combined with other lenses to form compex imaging systems.
Plano-convex cylindrical lenses are useful for line imaging or uni-axial magnification in a wide range of applications. These lenses ar manufactured from BK7 grade A optical glass and are supplied uncoated. Anti-reflection coating are available as listed earlier in this section. To order an anti-reflection coated lens simply append the wavelength in nanometers to the product number. These lenses may be combined with other lenses to form complex imaging systems.
Specifications Rod: Is used in sensors, light guides and endoscopes. Material: JGS1 We can offer sample before your purchase!
These wedged plane windows are polished to lambda/10 flatness with a laser grade finish on both surfaces They are intended for use in situations where reflections from the second surface will interfere with the correct operation of the optical system. Whenever ghost images will contribute to glare or for use in laser systems or interferometry it is advisable to use wedge window so the second image is reflected out of the beam. Four different wedge angles are offered and the wedge should be chosen to suit the application. Select a coating appropriate to your application or contact us with your special coating requirements.
Plano-convex cylindrical lenses are useful for line imaging or uni-axial magnification in a wide range of applications. These lenses are manufactured from BK7 grade A optical glass and are supplied uncoated. Anti-reflection coating are available as listed earlier in this section. To order an anti-reflection coated lens simply append the wavelength in nanometers to the product number. These lenses may be combined with other lenses to form complex imaging systems.
Plano-convex lenses are useful for a wide range of applications. These lenses are manufactured from BK7A grade A (or customer design) optical glass and are supplied uncoated. Anti-reflection coatings are available as listed earlier in this section. To order an anti-reflection coated lens simply append the wavelength in nanometers to the product number. These lenses may also be used as mirror blanks if a convex surface mirror is required. When used to focus a collimated beam, the light should be incident on the curved surface of the lens. These plano-convex lenses may be combined with other lenses to form compex imaging systems.
These general purpose plane windows are polished to lambda/10 flatness except where indicated otherwise. They are intended for for transmissive use and are parallel to better than 3 arcmin or 10 arcsec. Select a coating appropriate to your application or contact us with your special coating requirements
Plano-convex lenses are useful for a wide range of applications. These lenses are manufactured from BK7A grade A (or customer design) optical glass and are supplied uncoated. Anti-reflection coatings are available as listed earlier in this section. To order an anti-reflection coated lens simply append the wavelength in nanometers to the product number. These lenses may also be used as mirror blanks if a convex surface mirror is required. When used to focus a collimated beam, the light should be incident on the curved surface of the lens. These plano-convex lenses may be combined with other lenses to form compex imaging systems.
Plano-convex cylindrical lenses are useful for line imaging or uni-axial magnification in a wide range of applications. These lenses ar manufactured from BK7 grade A optical glass and are supplied uncoated. Anti-reflection coating are available as listed earlier in this section. To order an anti-reflection coated lens simply append the wavelength in nanometers to the product number. These lenses may be combined with other lenses to form complex imaging systems.
