Optical Glass Rod Lens

Optical lens

Cr39 1.49 55mm 60mm 65mm 70mm
1.56 progressive lens, photochromic lens
1.61 aspherical lens
1.67 resin lens
1.523 and 1.70 mineral glass lens

49*32*39
18kgs

Plano-convex lenses are useful for a wide range of applications. These lenses are manufactured from BK7A grade A (or customer design) optical glass and are supplied uncoated. Anti-reflection coatings are available as listed earlier in this section. To order an anti-reflection coated lens simply append the wavelength in nanometers to the product number. These lenses may also be used as mirror blanks if a convex surface mirror is required. When used to focus a collimated beam, the light should be incident on the curved surface of the lens. These plano-convex lenses may be combined with other lenses to form compex imaging systems.

Plano-convex lenses are useful for a wide range of applications. These lenses are manufactured from BK7A grade A (or customer design) optical glass and are supplied uncoated. Anti-reflection coatings are available as listed earlier in this section. To order an anti-reflection coated lens simply append the wavelength in nanometers to the product number. These lenses may also be used as mirror blanks if a convex surface mirror is required. When used to focus a collimated beam, the light should be incident on the curved surface of the lens. These plano-convex lenses may be combined with other lenses to form compex imaging systems.

Parameter:

Item PLCX, PLCC, BICX, BIXX, CXCC, DOUBLET
Material BK7 etc.
Design Wavelength Customer design
Dimension Tolerance +0/-0.05mm
Thickness Tolerance +/-0.1mm
Surface Quality 40-20 or better
Surface Figure Sph surface: Lambda/4 or better @632.8nm
Center Error ETV better than 0.01mm
Clear Aperture 90% of diameter
Bevel Protective bevel
Coating BBAR or customer design

Product description

This product description is for 08 fiber single mode double armored optical fiber cable designed to meet the technical requirements as mentioned as per specification documents, it fulfills the design for the applications desired therein. The design is based on stranded loose tube which provides stable performance over a wide temperature range and is compatible with any telecommunications-grade optical fiber. This cable is suitable for both duct and direct buried applications, it provides extra strength and rodent protection by using double armor and two inner coats. The stranded loose tubes contain thixotropic jelly for protection of the optical fibers as required. The thixotropic jelly protects the fibers within the loose tubes and provides excellent quality filling compound for stopping ingress/transport of water into the cable. The product is manufactured on itu-t g.652.D fiber. It facilitates easy and economical installation.

Features & application

Excellent optical, mechanical & environmental performance
High strength-to-weight ratio
Csm dielectric type v fiber reinforced plastic
Dry block construction
High tensile strength
High crush strength
Corrosion resistance
Kink resistance
Very light weight
Very flexible & small bending radius
Long haul / backbone application
Junction communication systems
All dielectric applications
Catv applications.

Construction parameters

Fiber count as per customer¦s requirement
No. Of loose tube to be designed to meet the specifications
No. Of fiber in each tube to be designed to meet the specifications.

Color of fibers as per tia/eia-598a
Loose tube material polybutylene terephthalate (pbt)
Loose tube filling material thixotropic jelly
Central strength member fiber reinforced plastic (frp) v non metallic
Core moisture protection methodology jelly filled construction
Peripheral strength member glass yarn
material medium density/high density polyethylene (mdpe/hdpe).

This cable has been designed for long haul direct / backbone application. Our stranded loose tube design provides stable performance over a wide temperature range and is compatible with any telecommunications-grade optical fiber. Direct buried type fiber optical cable are designed for easy and economical installation.

The stranded loose tubes contain thixotropic jelly but the cable core is based on dry-block construction. Incorporation of dry water block technology eliminates the need for traditional jelly filled water blocking methods, thus providing efficient and craft-friendly cable installation.

The thixotropic jelly is used to fill the buffer tubes to prevent water ingress. Steel tape armoring provides a rodent protection, length markings in meters for easy determination of cable length. Extra strength cable can also be delivered with peripheral strength members.

Features & application

Excellent optical, mechanical & environmental performance
High strength-to-weight ratio
Csm dielectric type û fiber reinforced plastic
Dry block construction
High tensile strength
High crush strength
Corrosion resistance
Kink resistance
Very light weight
Very flexible & small bending radius
Long haul / backbone application
Junction communication systems
All dielectric applications
Catv applications.

Construction Parameters

Fiber Count As per CustomerÆs Requirement
No. of Loose Tube As per CustomerÆs Requirement
G.655 As per CustomerÆs Requirement
G.652 As per CustomerÆs Requirement
Loose Tube Material Polybutylene Terephthalate (PBT)
Loose Tube Filling Material Thixotropic Jelly
Filler Material Medium Density/High Density Polyethylene (MDPE/HDPE)
Central Strength Member Fiber/Glass Reinforced Plastic (FRP/GRP)
Armoring Corrugated Steel Tape Armoring
Peripheral Strength Member (if required) Aramid / Glass Yarn
Core Moisture Protection Methodology Dry Block Design, Water Blocking Yarns/Tapes
Outer Sheath Material High Density Polyethylene (HDPE)
Printing on Outer Sheath Engraved Hot Foil or Inkjet Printing
Nominal Cable Delivery Length (km) 4 KM ¦ 3%.