These wedged plane windows are polished to lambda/10 flatness with a laser grade finish on both surfaces They are intended for use in situations where reflections from the second surface will interfere with the correct operation of the optical system. Whenever ghost images will contribute to glare or for use in laser systems or interferometry it is advisable to use wedge window so the second image is reflected out of the beam. Four different wedge angles are offered and the wedge should be chosen to suit the application. Select a coating appropriate to your application or contact us with your special coating requirements.
Plano-convex cylindrical lenses are useful for line imaging or uni-axial magnification in a wide range of applications. These lenses are manufactured from BK7 grade A optical glass and are supplied uncoated. Anti-reflection coating are available as listed earlier in this section. To order an anti-reflection coated lens simply append the wavelength in nanometers to the product number. These lenses may be combined with other lenses to form complex imaging systems.
Plano-convex lenses are useful for a wide range of applications. These lenses are manufactured from BK7A grade A (or customer design) optical glass and are supplied uncoated. Anti-reflection coatings are available as listed earlier in this section. To order an anti-reflection coated lens simply append the wavelength in nanometers to the product number. These lenses may also be used as mirror blanks if a convex surface mirror is required. When used to focus a collimated beam, the light should be incident on the curved surface of the lens. These plano-convex lenses may be combined with other lenses to form compex imaging systems.
These general purpose plane windows are polished to lambda/10 flatness except where indicated otherwise. They are intended for for transmissive use and are parallel to better than 3 arcmin or 10 arcsec. Select a coating appropriate to your application or contact us with your special coating requirements
11113 Wires Cables Suppliers
Short on time? Let Wires Cables sellers contact you.
Plano-convex lenses are useful for a wide range of applications. These lenses are manufactured from BK7A grade A (or customer design) optical glass and are supplied uncoated. Anti-reflection coatings are available as listed earlier in this section. To order an anti-reflection coated lens simply append the wavelength in nanometers to the product number. These lenses may also be used as mirror blanks if a convex surface mirror is required. When used to focus a collimated beam, the light should be incident on the curved surface of the lens. These plano-convex lenses may be combined with other lenses to form compex imaging systems.
Plano-convex cylindrical lenses are useful for line imaging or uni-axial magnification in a wide range of applications. These lenses ar manufactured from BK7 grade A optical glass and are supplied uncoated. Anti-reflection coating are available as listed earlier in this section. To order an anti-reflection coated lens simply append the wavelength in nanometers to the product number. These lenses may be combined with other lenses to form complex imaging systems.
Data rate: 40g
Channel: 4*10
Distance: 100m
Interface: mpo
Fiber: mm
Ddm: yes
Place of origin: made in china
Port:shenzhen
Features
High channel capacity: 40 gbps per module
Up to 11.1gbps data rate per channel
Maximum link length of 100m links on om3 multimode fiber or 150m links on om4 multimode fiber
High reliability 850nm vcsel technology
Electrically hot-pluggable
Digital diagnostic sff-8436 compliant
Case operating temperature range:0°c to 70°c
Power dissipation < 1.5 w
Standards
Compliant to ieee 802.3ba
Compliant to sff-8436
Rohs compliant.
Working temperature: commercial: 0°c to +70°c;industrial:-40°c to +85°c
Optical module used in ethernet, sdh, sonet, can be compatible with cisco 2900 series, cisco 4000 series, cisco 5000 series, huawei, the pole into, d-link, zte, hp, juniper and other equipment.
Our products require strict testing standards, standard packing form, to provide customers with quality service and timely delivery cycle.
Scope of application: switch, ethernet, data center, sdh, sonet, atm
Description:
Mini span adss fiber optic cable is idea for installation in distribution as well as transmission environments, even when live -line installations are required as its name indicates, there is no support or messenger wire required, so installation is achieved in a single pass.
Application: self-support aerial installation
Characteristic:
1.Suitable for use on distribution and high voltage transmission lines with mini spans or self supporting installation for telecommunication .
2. Track -resistant outer jacket available for the high voltage line where space potentials up to 35kv.
3. Gel-filled buffer tubes are s-z stranded
4. Instead of aramid yarn or glass yarn, there is no support or messenger wire required. Aramid yarn
Is used as the strength member to assure the tensile and strain performance
5. For mini span (100-150) the fiber counts from 2-72 fibers
Note:
1. Only a part of adss cables are listed in the table. More can be produce as required .
2. Cables can be supplied with a range of single mode or multimode fibers.
3. Specially designed cable structure is available on request.
Sophenol fiber Optic Patch Pigtail 12 cores Fiber Optic Patch pigtail cableare with premium grade connectors and with typical 0.9 mm outer diameter cables. Simplex fiber pigtials and duplex fiber pigtails are available, with different cable color, cable diameter and jacket types optional. The most common is known as the fusion splice on pigtail , and the 12 fibers or 6 fibers multi color pigtail are easy to install and provide a premium quality fiber optic connection . We also offer individual single pigtails , discounted 6 packs , or 12 packs . also are 12 fiber or 6 fiber jacketed pigtails .
In this 12-pack, 12 strands of fiber are terminated on one end with LC or SC, ST, FC connectors. Connectors are ceramic with Ultra PC (UPC) finish.
Features:
·Low insertion loss and back reflection loss.
·Good exchangeability.
·Good durability.
·High temperature stability.
·Available in 4 fibers, 6 fibers, 8 fibers, 12 fibers, 24 fibers etc.
·Meets ISO9001, ROHS and Bell core GR 326-core standards
·Compliant to IEC, TIA/EIA, NTT and JIS specifications
Advantage :
·UL certificate makes the quality leve be the best.
·Warranty is lifetime.
·100% pass testing to assure a satisfactory performance.
·No any defectives or scratches on the ferrule surface.
·If there is any quality problem, we will make replacement immediately by free.
Mode conditioning fiber optic patch cables are used specifically in Gigabit Ethernet 1000BASE-LX/LH applications where the objective is deploying new high-speed 1000BASE-LX routers, switches, or transceivers within existing multimode system backbones.
Mode conditioning fiber jumpers are used in the 1300nm or 1310nm optical wavelength window, and should not be used for 850nm short wavelength window such as 1000Base-SX. Also, any attempt to connect 1000Base-LX/LH equipment over short distances of multimode fiber without the use of mode conditioning fiber will result in a high bit error rate, and eventually damage to the device.
Features:
Compliant with IEEE 802.3z
To replace the standard equipment-to-cable plant patch cable
Rugged Offset Closure with Consistent Offset
Applications:
To replace the standard equipment-to-cable plant patch cable
Gigabit Ethernet 1000Base-LX (1300nm wavelength)
LX Gigabit Systems
Why to choose our fiber optic jumper ?
·We choose good quality material to assembly jumpers
·Our skilled artistry ensure good quality and durability
Fast delivery
·100% functionally tested prior to shipment
·Small orders acceptable and regular stock to ensure you do not miss any deal
·Warranty 3years
Fiber Loop back is designed to provide a media of return patch for a fiber optic signal; typically it is used for fiber optic testing applications or network restorations. For the testing applications, the loopback signal is used for diagnosing a problem. Sending a loopback test to network equipment, one at a time, is a technique for isolating a problem.
Sophenol's SC Loopback Module provides a return signal for fiber optic equipment which can be using for testing purposes and isolating any network issues.
Item Details:
Connector Types
Mode: Singlemode
Fiber Mode: 9/125um
Jacket Type: PVC
Durability: Over 500 cycles (=0.2dB)
Reflectance: Min. 20dB
Applications :
CATV, metro Test equipment
Telecommunication networks
Local area networks (LAN)
Wide area networks (WAN)
Premise installations
Data processing networks
Video and military active device termination
Packing information :
200pcs put into a carton, the weight is 10kg, the carton size is 38x38x28cm.
SMA905 optical fiber connector or terminal with air gap protection modified SMA905 metal connecting head,equiped large core diameter energy fiber can meet the general semiconductor laser and low power solider laser of output energy laser transmission.Connector can be used within the environmental protection technology of non glue technology,for further increase energy fiber cooling effect and service life,meet the need of laser welding and cutting that high power transmission.
Feature
Good light through rate
Excellent anti fatigue
Large core diameter optical energy
Tensile strength
Anti-biting,anti-termite
Application
Optical measurement applications
Medical Optical detection equipment
Detection of food safety
Factory automation
Cars,planes and military application
SMA905 optical fiber connector or terminal with air gap protection modified SMA905 metal connecting head,equiped large core diameter energy fiber can meet the general semiconductor laser and low power solider laser of output energy laser transmission.Connector can be used within the environmental protection technology of non glue technology,for further increase energy fiber cooling effect and service life,meet the need of laser welding and cutting that high power transmission.
Feature
Good light through rate
Excellent anti fatigue
Large core diameter optical energy
Tensile strength
Anti-biting,anti-termite
Application
Optical measurement applications
Medical Optical detection equipment
Detection of food safety
Factory automation
Cars,planes and military application
The fibers, 250, are positioned in a loose tube made of a high modulus plastic. The tubes are filled with a water-resistant filling compound. The tube is wrapped with a layer of PSP longitudinally. Between the PSP and the loose tube water-blocking material is applied to keep the cable compact and watertight. Two parallel steel wires are placed at the two sides of the steel tape. The cable is completed with a polyethylene (PE)sheath.
Good mechianical and temperature performance High strength loose tube that is hydrolysis resistant Special tube filling compound ensure a critical protection of fiber PSP enhancing moisture proof Two parallel steel wires ensure tensile strength Small diameter, light weight and friendly installation Long delivery length
The fibers, 250, are positioned in a loose tube made of a high modulus plastic. The tubes are filled with a water-resistant filling compound. A steel wire, sometimes sheathed with polyethylene(PE) for cable with high fiber count, locates in the center of core as a metallic strength member. Tubes(and fillers) are stranded around the strength member into a compact and circular cable core. The PSP is longitudinally applied over the cable core, which is filled with the filling compound to protect it from water ingress. The cable is completed with a PE sheath.
Characteristics
Good mechanical and temperature performance
High strength loose tube that is hydrolysis resistant
Special tube filling compound ensure a critical protection of fiber
Specially designed compact structure is good at preventing loose tubes from shrinking
Crush resistance and flexibility
PE sheath protects cable from ultraviolet radiation
The following measures are taken to ensure the cable watertight:
Steel wire used as the central strength member
Loose tube filling compound
100%cable core filling
PSP enhancing moisture-proof
The fibers, 250, are positioned in a loose tube made of a high modulus plastic. The tubes are filled with a water-resistant filling compound. A steel wire, sometimes sheathed with polyethylene(PE) for cable with high fiber count, locates in the center of core as a metallic strength member. Tubes(and fillers) are stranded around the strength member into a compact and circular cable core. An Aluminum Polyethylene Laminate(APL)is applied around the cable core, which is filled with the filling compound to protect it from water ingress. Then, the cable is completed with a PE sheath.
Characteristics
Good mechanical and temperature performance
High strength loose tube that is hydrolysis resistant
Special tube filling compound ensure a critical protection of fiber
Specially desighed compact struture is good at preventing loose tubes from shrinking
PE sheath protects cable from ultraviolet radiation
The following measures are taken to ensure the cable watertight
Steel wire used as the central strength member
Loose tube filling compound
100%cable core filling
APL moisture barrier
