Model Hr-8kw Power 8kw Voltage Ac380v/410v/400v/440v 50-60hz Frequency 27.12mhz Input power 15kva Rectifier Silicon diode Max pressure 400kgs Gap between electrodes 150mm The moving distance of active horn 100mm Size of upper electrode 100*800mm Size of lowwer electrode 120x800mm Welding time 0~10s adjustable Net weight 530kg Overall dimension 1500*1350*1740mm Character Applied to canvas , advertising, spark protection cloth welding, etc Firmly welding, be well meeting with materials of thick or thin. Machine groove deep and wide, convenient in continuous welding with large area Adopting high sensitive anti-sparkle device , avoid damaging the mould. Adjustable cutting pressure 1-50 ton, stable and realible in output, firm in structure. High quality imported apparatus, the longest welding extended to800*20mm one time European-model squareness high frequency vibration box, more realible and stable in output. 4.138cbm, 550kgs
Model Hr-15kw Power 15kw Voltage Ac380v/410v/400v/440v 50-60hz Frequency 27.12mhz Input power 15kva Rectifier Silicon diode Max pressure 10t/15t Gap between electrodes 100mm The moving distance of active horn 100mm Size of upper electrode 100*1500mm Size of lowwer electrode 120x1500mm Welding time 0~10s adjustable Net weight 580kg Overall dimension 1700*1480*1740mm Character Applied to canvas , advertising, spark protection cloth welding, etc Firmly welding, be well meeting with materials of thick or thin. Machine groove deep and wide, convenient in continuous welding with large area Adopting high sensitive anti-sparkle device , avoid damaging the mould. Adjustable cutting pressure 1-50 ton, stable and realible in output, firm in structure. High quality imported apparatus, the longest welding extended to 1000*20mm one time European-model squareness high frequency vibration box, more realible and stable in output. 5.23cbm 600kgs
Rigid frame stranding machine adopt tandem rigid type stranding without back twist. Equipped with bobbin auto-loading lifter, for 19-37-61b conductors round & pre-spiral sectors stranding and cable armouring. Hysteresis bobbin tension control. This line is mainly used for stranding and compacting of sector or round conductors including aluminum wire, copper wire and acsr etc.
The line is mainly used for copper wire drawing and continuous annealing. φ450 the drum wheel surface spray coating tungsten carbide, degree of hardness is high, the resistance to wear is good, the service life is long. The back guy main engine and the constant speed turn splitting independent motor-driven, has trades the mold function fast. The double plate continual recover of wire, trades the plate automatically, quaranteed trades the end of a thread the annealing quality. Uses the direct current mahine to actuate, the starting movement is steady. The electrical control, selects the import the driver and plc, the function is complete, the performance is stable.
Aluminum rod breakdown machine is horizontal slip type tandem drawing of aluminum and alloy aluminum rod break down, finishing capstan separated driven for quick die change: single step capstans 1 capstan with 1 passing die, replaceable tungsten carbide drawing rings long life for wearing. The line is used to draw ordinary aluminum rod or aluminum alloy rod into wire. The drawing capstans are arranged in a line that are able to work continuously with drawing speed, mechanical parts and electrical control matching each other. It is easy to operate, easy to change dies without pause and to change spools automatically. Main technical data Max. Inlet diameter of aluminum rod: φ 9.5mm Outlet diameter of aluminum wire: φ 1.8mm ~φ 5.0mm Max. Drawing speed: 25m/s Diameter of drawing capstan: φ 450mm Max. Drawing pass: 13 nos Max. Length in wire accumulator: 6m Take-up spool size: pnd500-pnd630 Main motor for drawing: 200kw(dc) Motor for final capstan: 45kw(dc) Take-up motor: 22kw(ac)
Tubular stranding machine is tubular type high speed stranding with back twist, for 7/12/19b copper/aluminum round & compact conductors and steel wires stranding. Bearing surround the tubular, hysteresis bobbin tension control. This line is mainly used for the assembly of bare and insulated conductors into concentric strands or cables including steel, aluminum, copper, aluminum alloy wire, as well as control cable and optical cable.
The line is mainly used for drawing copper, copper alloy contact wires( for high-speed electric railway). Main specifications: Inlet wire dia.: φ 27mm(max. ) Outlet wire dia.: φ 10.8-14.4mm Drawing capstans dia.: φ 1000mm Rod sectional area redution: 17-32% Rod length extention: 20-47% Drawing line speed: 1m/s( max. ) Drawing capstans is cooled by inner water(capcity: 15m3/h) Air supply: pressure: 0.6mpa, flow: 2.0m3/min Dawing lubrication: capacity: 15 m3, flow: 80l/min Take-up reel size: φ 2000mm ( or coustomize) Drawing capstans are driven by individual motor and the first one is 75kw dc motor, the next three are 55 kw dc motor The height of running central wire: 1200mm
Features: 1. The main body is made of aluminum of high strength by die-casting minutely. 2. It features light and compact in structure, as ideal portable machine. 3. Speed system adopts mechanical adjustment which can keep running continuously under high temperature. 4. Advanced motor with fan for cooling. 5. Circular rail can be equipped as required for circular piece cutting(optional). 6. Groove range: : i, y, v(45? Ç? ) 7. Applied for shipbuilding, oil production, metallurgy, metal structure and other manufactures, etc. 8. The model with torch are supplied. Overall dimensions: 600x175x228mm Power: 42/110/220v ac Cutting thickness: 6-100mm Cutting speed: 150-800mm/min Speed control: double cone stepless speed control system Weight: 15kg Max loading weight: 50kg 350x140x175
Main features: 1.It applied to plastic products in the aspects of riveting, cutting, sealing and welding. 2.Optimization of the heat welding defects (yellowing, edge burning and blocking up). Model: keb-2850 keb-3580 keb-2010 Frequency: 28khz 35khz 20khz Power: 500w 800w 1000w Working method: auto-excitation type Welding time: 0.01-9.99 sec Welding area: 5mm 8mm 16mm Dimensions:300*350*150 150*300*400 450*550*150 Weight: 15kg 20kg 25kg
1.Lift body electrically and adjust moulds conveniently and efficiently; 2.Weld pe, pp, nylon and pet which cannot be fused together by hot melting and ultrasonic welding. 3.Provide high-torque movement device with motor 1-50 ma Model: keb-pt20 Dimension: l900mm*w680mm*h1850mm Weight: 300kg Welding time: 0.01-9.99sec Pressure: 0-7kg/cm2 Application: pe, pt, nylon, pet, circular-tube objects and filter
1.Choose different horns and corresponding bases according to different working parts. 2.Have low demand of mental welding surfaces and no need of any flux. 3.Be applied for fusing nickel net of ni-h battery and nickel sheet, aluminum foil and aluminum sheet and so on. 4.Fuse one and more together. Model: keb-3510 keb-2015 Frequency: 35khz 20khz Power: 1000w 1500w Air pressure: 0.5kgf/cm2-6.0kgf/cm2 Welding time: 0.01-9.99 sec Dimension: 400*300*200 800*600*1000 Weight: 60kg 65kg
1.According to the products, choose pneumatic, hydraulic or servo motor drive. 2.Such parameters can be adjusted as welding temperature, heating time, cooling time, welding depth, pressure, transferred time. 3.According to the requirements of the welding procedure, choose semi-automatic or full-automatic mode. 4.According to the requirements of various materials, adjust the welding procedure. Dimension: l1070mm*w1180mm*h2100mm Weight: 500kg Drive mode: pneumatic, hydraulic or servo motor drive. Application: lighting, auto radiator, the hydrant of washing machine, storage battery, steam iron.
1.Set one-point or overall temperature-controlling riveting according to various car doorsí» welding areas. 2.Plc programmed control systems and human-computer interface for adjusting welding parameters. 3.The machine frame is weld with high-quality ú¼so it is of steadiness and high reliability. Model: keb-qcmb50 Dimension: l1750mm*w1100mm*h2500mm Weight: 300kg Welding time: 50-120s/pcs Application: car door, hood, instrument platform and etc.
We provide shear stud/ shear connector with ceramic ferrules with standard of iso13918, aws d1.1 and so on. The size from dia:10mm-25mm and the length from: 50mm-250mm We also manufacture stud welding machines, welding guns and so on. Iso13918, aws d1.1
14db stainless steel wire drawing machine technical parameter 1.Machine type 14db 2.Inlet diameter(mm) 0.6-1.2 3.Outlet diameter (mm) 0.25-0.5 4.Max. Speed(mpm) 800 5.Max.Number of drawing dies 14 6.Slip ratio of m/c 12% 7.Fix speed capstan slip ratio 8% 8.Capstan : tungsten 9.Max. Capstan dia.(mm) 380 10.Fix speed capstan dia. (mm) 330 11.Frame : welded by steel plate 12.Main machine power : 18.5kw three phase inductor motor 13.Spooler power : 5.5kw three phase inductor motor 14.Correction system : automatically control 15.Transmission method ú¦by timming belt 16.Pay-off method : over head 17.Tension control : pneumatic balance by swing arm 18.Lubrication system of drawing : half-immersing 19.Suitable spool (mm) 300 20.Capacity for take-up(kg) 35 21.Loading & unloading method : shaft type 22.Service voltage 380v 23.Brake : electromagnetic brake 24.Machine dimension(mm) : 1950l*1100w*1750h 25.Machine weight(kg) 2200 Wooden tray
Application: Suitable for cutting masking, double side, foam & cloth tapes etc. Specification: Machine width: 1.0m, 1.3m, 1.6m cutting core diameter: °3" Mini.Cutting width: 2mm Max.Cutting diameter: °280mm(°300mm-°450mm optional) Feature: 1. Cutting shaft and circular blade are driven by a.C motor with inverter control, which able to set rpm and running direction obverse/reserve on different requests. 2. Width setting is controlled by servo motor with ball screw and guide rails to make accuracy movement. 3. Functions are operated under lcd touch panel control, which is operator friendly and easy for data setting. 4. Central control system is plc unit, it can cut various sizes on one log roll by changing modes automatically. 5. Knife feeding is controlled by servo motor, the cutting speed is adjustable in high/low. 6. Equipped with knife angle auto adjustment, cutting angle can be changed from 8 to +8 degree automatically for making roll surface smoothly. 7. Safety cover: to protect operator during the production. 8. Sharpening device: grinding knife on the machine to save time for taking blade off. Optional part: 1. Other size cutting shaft: it can be made as per the required core i.D. 2. Cutting supporter: for supporting log roll when cutting core below 38mm.
Application: 2 shafts auto exchange rewinding machine, suitable for rewinding various self-adhesive tapes. Specification: Machine width: 1.3m, 1.6m Unwind diameter: 800mm(optional) Max. Rewind diameter: 300mm Feature: 1. Equipped with connected unwind base and web pulling out by jog motor control. 2. Equipped auto tension controller and surface type lay on roller on unwind base to make web wound out smoothly. 3. Driven by 2 a.C motors, 1 for web feeding, 1 for rewind tension control which automatically increasing toque on the rewind shaft when the finished roll o.D is getting bigger. 4. Center type winding with surface pressure roller to rewind various materials on different requests. Optional part: 1. Unwind pick-up lift : for loading jumbo roll on the machine quickly and time saving. 2. Equipped with separated shaft type unwind base. 3. Safety cover: connected unwind safety cover, hydraulic control. 4. Tabbing device :automatic tabbing on the web during the production. 5. Slitting device : able to be equipped with air score knife and trim removable unit for trimming at both sides and wide size slitting. 6. The air for the rewind shafts will be automatically filled and leaked in the production. 7. Material end cutting off and log roll wiping down are all applied automatically during the production and rewinding is finished.
Typemodel gbchemical composition (% )coordinated flux Cmnsispcrnicu Thm-43 Thg-43h08a H08e H08c0.100.30/0.600.030.030 0.020 0.0150.030 0.020 0.0150.20 0.10 0.200.30 0.10 0.300.20sj301 sj501 and hj431 and so on Thm-43a Thg-43ah08mna0.100.80/1.100.070.0300.0300.0200.300.020sj101sj127sj501 and hj431 and so on Thm-43b Thg-43bh10mn2 H10mn2a0.12 0.171.50/1.90 1.80/2.200.07 0.050.035 0.0300.0300.0200.300.020sj101sj127sj501 and hj431 and so on Thm-50 Thg-50h08mn2si0.111.70/2.100.65/0.950.0350.0350.0200.300.020sj101sj201sj501 and hj431 and so on Thm-50a Thg-50ah08mn2sia0.111.80/2.100.65/0.950.0300.0300.0200.300.020sj201sj501and hj431 and so on Note: thg-43 thg-43a thg-50 thg-50 are the welding wire of non-copper coating(low bright, antirust treatment) Typemodel Gbusage Thm-43 Thg-43h08a H08e H08cfor welding low carbon steel and some low-alloy steel(16mn) structures with flux hj430, hj431, hj433. Thm-43a Thg-43ah08mnafor welding low carbon steel and low-alloy steel(16mn) structures with flux hj430, hj431, hj230, hj330. Thm-43b Thg-43bh10mn2 H10mn2afor welding low carbon steel or 50kg.F/mm 2 high-strength steel structures like boat, heavy-machines, pressure container and bridges. Thm-50 Thg-50h08mn2sifor welding 50kg.F/mm 2 high-strength steel structures or sheet. Thm-50a Thg-50ah08mn2siaditto Note:thg-43 thg-43a thg-50 thg-50 are the welding wire of non-copper coating(low bright, antirust treatment)
The flux-cored welding wire is intended to inert-gas shielded fusion welding of titanium and its alloys and includes a metal coating or tubular casting of titanium or its alloys and a powder flux core containing (per cent by weight): Baf2 -- 5 to 10, Fluoride of a rare-earth element -- 18 to 20, Caf2 -- 40 to 50, Srf2 -- the rest, The ratio of the weight content of the powder flux to the total weight content of titanium in the wire being from 0.3: 1 to 1: 1.
Application and features: Suitable for butt welding of plastic pipes and/or fittings made of pe, pp and pvdf in worksite or workshop. Consists of basic frame, hydraulic unit, planing tool, heating plate, support for planing tool&heating plate, and optional parts. Removable ptfe coated heating plate with high accurate temperature control system. Electrical planing tool with safty limit switch. Be made of lightweight and high strength material; designed with a clamp opening angle of 45 degrees c. Low starting pressure and high reliable seal structure. Changeable welding position enables to weld various fittings easier. Separate two-channel timer records time in soaking and cooling phases. High-accurate and shockproof pressure meter indicates clearer readings. Optional parts: Stub end device for flange stub. Data logger. Crane. Technical parameters: Type: shd630 Pipe size (mm): 315, 355, 400, 450, 500, 560, 630 Heating plate max. Temp.: 270 oc Temp. Deviation in surface (170-250 oc): ¿¬n¿¬a7 oc Pressure adjustable ranges: 0~6.3 mpa Working voltage: 380v, 50hz Heating plate power: 9.2 kw Planing tool power: 1.5 kw Hydraulic unit power: 1.5 kw Total power: 12.2 kw Total weight: 617 kgs. 1. Basic frame: 1680x1280x1240 2. Support: 860x1160x1480 3. Hydraulic unit: 760x490x620.
