Hydraulic tamping machine is a professional machine used for railway line works maintenance, which can operate at train interval without blocking the section. Equipped with internal combustion engine or electric motor for power, hydraulic transmission, each machine one person operation, manual implementation. It is provided with a lower road frame, and does not violate the "limit" after the lower road.
Rail Cant Measuring Device is a High Quality Railway Measuring Tool / Cheapest Rail Bottom Slope Measuring Instrument .The main part of the wheel tread is the 1:40 slope.To make the top of rail fore evenly under the load of a conical tread wheel.Rail should be tumbling-in not vertical.the inner inclination of therail is called rail bottom slope.The product is easy to use,both in the daytime and at night.It is an ideal measuring tool for public works and engineering departments.
NCM-5.1 frog and switch grinder is specifically designed for grinding operations through switch and crossings and either side of the rail head. The grinding device of the machine can be tilted by 30�° from the vertical direction to the left and right, and the position of the grinding wheel can be adjusted along the vertical and horizontal directions So that the grinding device of the machine can work very accurately in the narrow space between the rails. The machine adopts the pull rod transverse feed mode, which is easy for the operator to grasp the feed force and improve the grinding quality and efficiency. It has the characteristics of precise turning and positioning at any position and angle of the turmout rail head
Product Description
YD-22 Hydraulic Rail Tamping Machine
The machine is suitable for tamping operation on various rail and concrete sleeper track after the overhaul and medium ballast cleaning operation, and also suitable for tamping operation on the ballast bed of new track. This machine has the features of high quality performance, reasonable structure, reliable and high working efficiency, which will satisfy the requirement of ballast tamping operation.
Specification
Model
YD-22
Type
Rail Tamping Machine
Material
Stainless Steel
Dimensions (L x W x H) (mm)
1300 * 750 * 1600mm
Engine
Diesel Engine SF190
Power
7kW
Vibrating force
22kN
Vibrating frequency
66.7Hz
Hydraulic system working pressure
5~6MPa
Max insert force
16kN
Max clamping force
6.5kN * 2
Production efficiency
270 pieces / (group hour)
Inserting depth
110mm ± 10mm (underneath the sleeper)
Weight
439kg
29517 Transportation Air Rail Auto Components Suppliers
Short on time? Let Transportation Air Rail Auto Components sellers contact you.
The design of FMG-2.2 electric rail profile grinder allows you accurate and stable profile grinding up to 90°about the rail head by rotation of the machine using its turning device and its inclinable operating arm. According to customer needs, 380V three-phase motor can be selected as power or 220V single-phase power as power. With good visibility of the grinding area assures you of a high quality finish.
Specification
Model
FMG-2.2
Type
Electric Rail Grinding Machine
Material
Stainless Steel
Dimensions (L x W x H) (mm)
1200*420*900mm
Engine
2.2kW, 380V or 220V electric motor
Grinding stone speed
2860 r/min
Grinding stone specification
150*55*70mm
Grinding stone feeding stroke
50mm
Turning angle of grinding stone
90°
Weight
80KG
NGM-5.1 Rail Profile Grinding Machine
This machine is mainly used for forming and grinding operations of railway rail welding joints and rail surface repairs. The
development and application of the CNC feed unit realizes the intelligent control of the grinding wheel feed. Significantly
improve the profiling accuracy and polishing efficiency.
BENIFITS
Angle of the grinding head is set using an adjustment wheel, lowering/raising of the grinding stone is electrically contlled Equipped with spark protection device Equipped with electric control system prevents over grinding by limiting the lowering of the grinding stone Grinds the whole head of rail in one single operator, no need to turn the machine or to handle it
Specification
Model
NGM-5.1
Type
Rail Profile Grinding Machine
Material
Stainless Steel
Dimensions (L x W x H) (mm)
1500 * 450 * 750 mm
Engine
HONDA GX270
Power
5.1 kW
Grinding wheel specifications
125x65 mm
Feeding accuracy
0.1 mm
Turning angle of grinding stone
±90°
Spindle revolution
4100r/min
Grinding stone feeding stroke
42 mm
Profile wheel span
1000 mm
Weight
100 kg
Weight of supporting rod
14 kg
NGM-4.8I Digital Display Rail Grinding Machine
NGM-4.8I digital display rail grinding machine is suitable for grinding 43kg/m-75kg/m rail weld, uneven joint, rail side fat edge, rail surface welding repair and other parts. With a multi-purpose, automation and intelligent set as one of the high-precision rail grinding machine.
Specification
Model
NGM-4.8I
Type
Rail Grinding Machine
Material
Stainless Steel
Dimensions (L x W x H) (mm)
1500 * 450 * 750 mm
Internal combustion engine
GX200, > 3600r/min, 4.8kW
Grinding Wheel Specification
125*65*M20
Grinding Wheel Linear Velocity
> 35m/s
Spindle rotation
4500r/min
Inclination angle of grinding wheel
+90 degrees
Accuracy of inclination angle
0.5 degree, 1.0 degree, 2.0 degree, 3.0 degree, 4.0 degree, 5.0 degree
Grinding wheel stroke
45 mm
Grinding wheel feed accuracy
0.05 mm, 0.1 mm, 0.15 mm, 0.2 mm, 0.25 mm, 0.3 mm
Profile wheelbase
1000mm
Weight
90kg
NCM-5.1 Rail Switch Grinding Machine
NCM-5.1 frog and switch grinder is specifically designed for grinding operations through switch and crossings and either side of the rail head. The grinding device of the machine can be tilted by 30° from the vertical direction to the left and right, and the position of the grinding wheel can be adjusted along the vertical and horizontal directions So that the grinding device of the machine can work very accurately in the narrow space between the rails. The machine adopts the pull rod transverse feed mode, which is easy for the operator to grasp the feed force and improve the grinding quality and efficiency. It has the characteristics of precise turning and positioning at any position and angle of the turmout rail head.
Specification
Model
NCM-5.1
Type
Rail Grinding Machine
Material
Stainless Steel
Dimensions (L x W x H) (mm)
2100*1120*1030mm
Engine
Honda GX270 Petrol engine
Rated power
5.1kW
Grinding wheel speed
3600r/min
Grinding wheel feeding stroke
80mm
Feed adjustment accuracy
l0mm
Grinding wheel rotation angle
30°
Weight
117kg
Product Description
NGM-6.0 Rail Profile Grinder
This machine is powered by the M165 two-stroke petrol engine imported from Spain. It is a small machine used for forming and grinding the rail head welding joints and surface repairs. It is suitable for rails of 43~75kg/m. The special diaphragm carburetor make sure the engine does not stall after turning 90°, and the output torque is stable without power attenuation, thus ensuring the precision of rail grinding.
Specification
Model
NGM-6.0
Type
Rail Profile Grinder
Material
Stainless Steel
Dimensions (L x W x H) (mm)
1410*500*850mm
Engine
2 stroke petrol engine M165
Power
6.0kW
Grinding stone speed
3900r/min
Grinding stone inclination
0~90°
Grinding stone feeding stroke
42mm
Grinding stone specification
150x55x70mm
Fuel tank volume
4.5L
Profile wheel span
1000mm
Feed adjustment accuracy
0.125mm
Weight
60kg
Vertical double lithium electric torque wrench (model: U-LD81901) is a railway digital display torque wrench with vertical operation and double lithium electric protection technology, and its working torque is>3000N m. The torque value is adjustable and controllable, which is specially used for various railway bolt operations. The vertical double lithium electric torque wrench (model:LJ - LDB1901) is composed of a control lever, a motor, and a reducer. It adopts the unique ergonomic flat impact principle, which makes the machine more safe, labor-saving, and efficient. Its unique overall waterproof design ensures the all-weather construction needs. Torque regulation and compensation can make torque control more accurate to meet construction requirements.
Specification
Model
LJ-LD81901
Type
Battery Impact Wrench
Material
Stainless Steel
Dimensions (L x W x H) (mm)
600*400*250mm
Rated voltage
(DCV) 18-36
Max. torque
3000 N.m
Motor speed (RPM)
0-3000 optional
Impact frequency (BPM)
0-5000 optional
Battery pack capacity
(ah) 18-36
Operating temperature range
(-40 ~ 50 )
Torque control
adjustable and controllable
7. Cutting accuracy: a. Vertical deviation between incision and longitudinal direction of the rail: 0.40mm b. Plane deviation between bidirectional cutting interface: 0.35mm
NQG5III Rail Cutting Machine
NQG5III Internal combustion rail cutting machine is suitable for cutting rails of 43kg/m75kg/m . The quality of cutting section meets the requirement of railway industrial standards. Its a necessary tool used in railway overhaul, maintenance and rush repairing operation. It has features of fast cutting speed, high utilization rate of thin grinding wheel, high quality of cutting section, easy operation, easy movement, safe use and wide application range etc.
Specification
Model
NQG5III
Type
Rail Cutting Machine
Material
Stainless Steel
Dimensions (L x W x H) (mm)
670*600*510mm
Internal combustion engine
HONDA GX200
Engine Power
4.8kW
Engine Speed
3600r / min
Thin grinding wheel (spindle)
Spindle speed 3030r / min
Specification (linear velocity)
400 * 32 * 4 (70m /s)
Cutting time
60kg / m rail, 120S
Number of usage
50kg /m rail, use 4 times
60kg /m rail, use 3 times
Machine weight
39.5kg
Product Description
NQG-5.8 Abrasive Rail Saw
NQG-5.8 lightweight abrasive rail saw is a railway maintenance tool. It not only cuts rails with high speed and high quality, but also has low wear cutting discs. It is locked by rail clamps. It has a simple structure, light weight, safety and easy movement. It is suitable for maintenance, repair of broken rails of seamless tracks, and cutting of steel rails in long rail welding factories.
Specification
Model
NQG-5.8
Type
Rail Cutting Machine
Material
Stainless Steel
Dimensions (L x W x H) (mm)
850*480*500mm
Engine
Single-cylinder, air-cooling
two-stroke petrol engine
(imported from Sweden K1270R)5.8 kW
Cutting disc form
Double- layer reinforced wire mesh
Linear speed of cutting disc
100 m/s
Rated RPM
4500 r/min
Specification of cutting disc
355x25.4 x3.8mm
Cutting accuracy
Vertical deviation of notch and rail0.30mm
Deviation of bidirectional cutting interfaces0. 35mm
Cutting time
110s( cut off 60kg/m rail)
Fuel tank capacity
1.25 L
Weight
22kg
To furnish the varying desires of our customers, we are immersed in offering a world class consignment of Abrasive Rail Cutter. Abrasive Rail Cutter is suitable for cutting upto 60 Kg. 110 uts Rails. the machine has features of fast cutting speed, high utilization rate of cutting discs, high quality of cutting profile, convenient operation, easy motion and safe use. the machine comprises of petrol driven engine, integrated with a cutting unit fitted with an abrasive disc.
Specification
Model
NQG-5.1
Type
Rail Cutting Machine
Material
Stainless Steel
Dimensions (L x W x H) (mm)
800*560*500mm
Engine
GX270 petrol engine 5.1KW
Specification of cutting disc
�?400*�?32 *4mm
Cutting disc no. of revolutions
3320 r/min
Linear speed of cutting disc
70m/s
Cutting accuracy
Verticality0. 4mm, flatness0.3mm
Cutting time
2 min ( cut off 60kg/m rail)
Weight
50kg
The Battery powered rail cutting machine has passed the strict verification of protection grade, and supports the work in rainy and snowy weather; Professional lithium battery platform for ultra long endurance operation; The equipment can be used normally under extreme conditions such as high cold and high altitude; The lithium battery has passed the safety test conducted by the national authority.
NGM-5.1 Rail Profile Grinding Machine
This machine is mainly used for forming and grinding operations of railway rail welding joints and rail surface repairs. The
development and application of the CNC feed unit realizes the intelligent control of the grinding wheel feed. Significantly
improve the profiling accuracy and polishing efficiency.
BENIFITS
Angle of the grinding head is set using an adjustment wheel, lowering/raising of the grinding stone is electrically contlled Equipped with spark protection device Equipped with electric control system prevents over grinding by limiting the lowering of the grinding stone Grinds the whole head of rail in one single operator, no need to turn the machine or to handle it
Specification
Model
NGM-5.1
Type
Rail Profile Grinding Machine
Material
Stainless Steel
Dimensions (L x W x H) (mm)
1500 * 450 * 750 mm
Engine
HONDA GX270
Power
5.1 kW
Grinding wheel specifications
125x65 mm
Feeding accuracy
0.1 mm
Turning angle of grinding stone
±90°
Spindle revolution
4100r/min
Grinding stone feeding stroke
42 mm
Profile wheel span
1000 mm
Weight
100 kg
Weight of supporting rod
14 kg
NGM-4.8I Digital Display Rail Grinding Machine
NGM-4.8I digital display rail grinding machine is suitable for grinding 43kg/m-75kg/m rail weld, uneven joint, rail side fat edge, rail surface welding repair and other parts. With a multi-purpose, automation and intelligent set as one of the high-precision rail grinding machine.
Specification
Model
NGM-4.8I
Type
Rail Grinding Machine
Material
Stainless Steel
Dimensions (L x W x H) (mm)
1500 * 450 * 750 mm
Internal combustion engine
GX200, > 3600r/min, 4.8kW
Grinding Wheel Specification
125*65*M20
Grinding Wheel Linear Velocity
> 35m/s
Spindle rotation
4500r/min
Inclination angle of grinding wheel
+90 degrees
Accuracy of inclination angle
0.5 degree, 1.0 degree, 2.0 degree, 3.0 degree, 4.0 degree, 5.0 degree
Grinding wheel stroke
45 mm
Grinding wheel feed accuracy
0.05 mm, 0.1 mm, 0.15 mm, 0.2 mm, 0.25 mm, 0.3 mm
Profile wheelbase
1000mm
Weight
90kg
NCM-5.1 Rail Switch Grinding Machine
NCM-5.1 frog and switch grinder is specifically designed for grinding operations through switch and crossings and either side of the rail head. The grinding device of the machine can be tilted by 30° from the vertical direction to the left and right, and the position of the grinding wheel can be adjusted along the vertical and horizontal directions So that the grinding device of the machine can work very accurately in the narrow space between the rails. The machine adopts the pull rod transverse feed mode, which is easy for the operator to grasp the feed force and improve the grinding quality and efficiency. It has the characteristics of precise turning and positioning at any position and angle of the turmout rail head.
Specification
Model
NCM-5.1
Type
Rail Grinding Machine
Material
Stainless Steel
Dimensions (L x W x H) (mm)
2100*1120*1030mm
Engine
Honda GX270 Petrol engine
Rated power
5.1kW
Grinding wheel speed
3600r/min
Grinding wheel feeding stroke
80mm
Feed adjustment accuracy
l0mm
Grinding wheel rotation angle
30°
Weight
117kg
Product Description
NGM-6.0 Rail Profile Grinder
This machine is powered by the M165 two-stroke petrol engine imported from Spain. It is a small machine used for forming and grinding the rail head welding joints and surface repairs. It is suitable for rails of 43~75kg/m. The special diaphragm carburetor make sure the engine does not stall after turning 90°, and the output torque is stable without power attenuation, thus ensuring the precision of rail grinding.
Specification
Model
NGM-6.0
Type
Rail Profile Grinder
Material
Stainless Steel
Dimensions (L x W x H) (mm)
1410*500*850mm
Engine
2 stroke petrol engine M165
Power
6.0kW
Grinding stone speed
3900r/min
Grinding stone inclination
0~90°
Grinding stone feeding stroke
42mm
Grinding stone specification
150x55x70mm
Fuel tank volume
4.5L
Profile wheel span
1000mm
Feed adjustment accuracy
0.125mm
Weight
60kg
29517 Transportation Air Rail Auto Components Suppliers
Short on time? Let Transportation Air Rail Auto Components sellers contact you.
