Analogue track gauge is used for measuring the railway track gauge,check rail gauge, back to back distance,super-elevation.
It is Suitbale for railway speed not greater than 160km/h.Traditional compass is more easier for rail workers to accept and
operate.Light weight structure is convenient to carry.
lightweight abrasive rail saw
lightweight abrasive rail saw is a railway maintenance tool. It not only cuts rails with high speed and high quality, but also
has low wear cutting discs. It is locked by rail clamps. It has a simple structure, light weight, safety and easy movement. It is
suitable for maintenance, repair of broken rails of seamless tracks, and cutting of steel rails in long rail weldin
GM-2.2 Electric Rail Grinding Machine
GM-2.2 electric rail grinding machine for 43kg / m-75kg / m rail weld, uneven joints, rail side fat side, rail welding and other
parts of the grinding. It has the advantages of high operation efficiency, good grinding quality, easy operation and convenient operation of the upper and lower roads. It is an essential tool for overhaul, maintenance and repair of railway.
Railway Track Square
Railway square ruler is a special measuring tool used to check the right Angle dislocation of railway track.
Benefits
1. High accuracy:The structure is uniform, the linear expansion coefficient is minimal, the internal stress completely disappears, the ruler body is stable and does not deform. It can keep the perpendicularity between the ruler body and the rail surface â?¤0.05mm
2. Long service life: It is made of aluminum alloy, resistant to acid and alkali corrosion, not easy to rust, not easy to stick to dust, no need to grease, easy and simple maintenance
3. Stable insulation performance: one end is the insulated electric board and the other end is the plastic insulation sleeve. It can ensure the operating safely.
4.Customizable
5.The Measuring head is made of bearing steel: High hardness, not easy to rust and deformation 6.Multifunctions
1)Measure the switch angle steel whether is square when installed
2)Measure the internal lock switch parts whether is square when installed
3)Measure the switch rail whether creeping
4) Measure the sleeper whether square when installed.
29752 Transportation Air Rail Auto Components Suppliers
Short on time? Let Transportation Air Rail Auto Components sellers contact you.
Rail wave grinding machine
The GBM-7.6 rail wave abrasion grinding machine is a professional machine used for the wave abrasion and grinding of the rail top.
This machine is suitable for various rails of 43~75kg/m.
Product Description
YDT-900 Hydraulic Vertical Rail Bender
This machine is used for the bending operation of railway seam lines and welded joints of seamless tracks and other low-collapsed parts of steel rails. It can also be used as vertical bending and supporting equipment in the laying of seamless tracks; suitable for all types Rails. The machine has simple structure, convenient operation, safe operation and easy maintenance. It is an effective tool for rectifying rail joint problems.
Product Description
Hydraulic rail bending machine rail bender
Hydraulic rail bending machine also called hydraulic bend machine, is rail installation maintenance when a special tool to bend the rail operations. Hydraulic bend machine is a dedicated to laying railway line in tunnel mining slope level elevation changes at the scene of the track-laying for below 50 kg/m or light rail vertical bending or adjustment. Hydraulic rail bending machine
designed by the principle of hydraulic transmission and leverage, using static pressure on curved track rail horizontal and
vertical curve or straight rail operations.
Product Parameters
Model
YZG- 550 type hydraulic rail bending machine
Rated force
550KN
Rated pressure
52Mpa
Size
1100 700 400 mm
Whole machine weight
125kg
CNC Rail profile grinding machine
This rail profile grinding machine is mainly used for forming and grinding operations of railway rail welding joints and rail surface repairs. The development and application of the CNC feed unit realizes the intelligent control of the grinding wheel feed. Significantly improve the profiling accuracy and polish
GM-2.2 Electric Rail Grinding Machine
GM-2.2 electric rail grinding machine for 43kg / m-75kg / m rail weld, uneven joints, rail side fat side, rail welding and other
parts of the grinding. It has the advantages of high operation efficiency, good grinding quality, easy operation and convenient operation of the upper and lower roads. It is an essential tool for overhaul, maintenance and repair of railway.
Model
GM-2.2
Type
Electrict Rail Profile Grinder
Material
Stainless Steel
Dimensions (L x W x H) (mm)
1500mm*630mm*760mm
Electric motor
Type:Y2-Y90L-2
Voltage: 380V three phase
Rpm:2840r/min
Power:2.2kW
Grinding wheel
125*65*M20
Spindle speed
2840r/min
Wheel distance
1000mm
Wheel stroke
50mm
Weight
54kg
Railway Track Square
Railway square ruler is a special measuring tool used to check the right Angle dislocation of railway track.
Benefits
1. High accuracy:The structure is uniform, the linear expansion coefficient is minimal, the internal stress completely disappears, the ruler body is stable and does not deform. It can keep the perpendicularity between the ruler body and the rail surface â?¤0.05mm
2. Long service life: It is made of aluminum alloy, resistant to acid and alkali corrosion, not easy to rust, not easy to stick to dust, no need to grease, easy and simple maintenance
3. Stable insulation performance: one end is the insulated electric board and the other end is the plastic insulation sleeve. It can ensure the operating safely.
4.Customizable
5.The Measuring head is made of bearing steel: High hardness, not easy to rust and deformation 6.Multifunctions
1)Measure the switch angle steel whether is square when installed
2)Measure the internal lock switch parts whether is square when installed
3)Measure the switch rail whether creeping
4) Measure the sleeper whether square when installed.
Rail Gap Gauge
Rail Gap Gauge is used for measuring the distance between two adjoining rails
Benefits:
Joint Gap Measuring Device shape: similar to carrot, tapered.
This product is made of stainless steel , long service life. Easy to operate and easy to carry
Model
NW-BB
Type
Gap Gauge
Material
Stainless Steel
Dimensions (L x W x H) (mm)
35*15*5cm
Measure range
5-30mm
Material
Stainless steel
MOQ
50 Pieces
Rail Thermit Welding
Thermite welding is a track connection construction process with mature technology, simple, convenient, fast, and high-quality construction.Rail thermite welding is the thermite flux composed of aluminum powder, iron oxide and other metal additives in a special crucible, and a high temperature match is used to ignite the thermite reaction. During the reaction, a large amount of heat is released and the molten alloy mixture reacts to form.Because of its high density, molten steel sinks below, the slag generated by the reaction is relatively light and floats on the upper part, and the molten steel is filled with sand in a short time.At the same time, the aluminum hot molten steel itself acts as a filler metal, crystallizes and cools together with the molten steel rail, and the two steel rails form a whole.
Rail frog and switch grinding machine
NCM-5.1 frog and switch grinding machine is specifically designed for grinding operations through switch and crossings and either side of the rail head. The rail grinding device of the machine can be tilted by 30�?�° from the vertical direction to the left and right, and the position of the grinding wheel can be adjusted along the vertical and horizontal directions So that the grinding device of the machine can work very accurately in the narrow space between the rails. The frog and switch grinding machine adopts the pull rod transverse feed mode, which is easy for the operator to grasp the feed force and improve the grinding quality and efficiency.
Contact rail gauge for METRO measurement
The contact rail gauge is a gauge for measuring the parameters of the subway contact rail. Measurement parameters can be
customized according to customer requirments,detachable and easy to carry.
the main ruler body use high strengthsquare tube aluminum alloy.
advantages:precise measurement,new style,reasonable design.
Rail Opening Gauge
JG-KC01 Rail opening gauge is mainly used for measuring turnout opening and offset gauge. It can be used for electrical maintenance, overhaul, engineering survey and other related department line operation.The instrument has fast measuring speed and easy to use. It can be used in day or night.
Specification
Model
JG-KC01
Type
Rail Opening Gauge
Material
Stainless Steel
Dimensions (L x W x H) (mm)
50*3*5cm
Opening measure range
0-350mm
Offset measure range
0-350mm
Accuracy
±0.25mm
Working temperature
-30~+55
Length Size
56cm
Track Jacks
Track jack a device for raising railway track during ballasting or other track operations. Mechanical track jack is the simplest & sturdiest types of the jacks and widely used in Oil Fields, Railway Track Work,Ship Yards, Mining Operation, Construction &Heavy Duty Industrial Maintenance & Establishments. These Track jacks can be used to lifting both on down and up strocks. They're not only be lowered tooth by tooth but also can be made to tripped off by just moving the trip control.
Railway Brake Shoes
Friction buffer stops for mainline person and goods traffic railways are especially designed to withstand an impact with large masses with max. speeds of 25 km/h. The track systems and the used locomotives or cars in addition to their buffer geometry determine the type and design of the corresponding solution. Friction buffer stops that are also able to withstand the permanent stress in shunting operations are what characterise. A buffer stop or bumper is a device to prevent railway vehicles from going past the end of a physical section of track. The design of the buffer stop is dependent in part upon the kind of couplings that the railway uses, since the coupling gear is the first part of the vehicle that the buffer stop touches.
The purpose of a friction buffer block is to secure the track end and its direct surroundings as well as the rail vehicles
themselves. If the brakes fail, the buffer stop should be designed to decelerate the vehicle safely and in controlled manner until it stops.
Specification
Model
LJ-TX
Type
Railway Brake Shoes
Material
Stainless Steel
Dimensions (L x W x H) (mm)
300*300*150mm
NCM-5.1 Rail Switch Grinding Machine
NCM-5.1 frog and switch grinder is specifically designed for grinding operations through switch and crossings and either side of the rail head. The grinding device of the machine can be tilted by 30° from the vertical direction to the left and right, and the position of the grinding wheel can be adjusted along the vertical and horizontal directions So that the grinding device of the machine can work very accurately in the narrow space between the rails. The machine adopts the pull rod transverse feed mode, which is easy for the operator to grasp the feed force and improve the grinding quality and efficiency. It has the characteristics of precise turning and positioning at any position and angle of the turmout rail head.
Specification
Model
NCM-5.1
Type
Rail Grinding Machine
Material
Stainless Steel
Dimensions (L x W x H) (mm)
2100*1120*1030mm
Engine
Honda GX270 Petrol engine
Rated power
5.1kW
Grinding wheel speed
3600r/min
Grinding wheel feeding stroke
80mm
Feed adjustment accuracy
l0mm
Grinding wheel rotation angle
30°
Weight
117kg
lightweight abrasive rail cutting machine
The rail cutting machine is powered by Honda GX270 single-cylinder air-cooled four-stroke petrol engine, which has the characteristics of fast cutting speed, high cutting end face quality, convenient operation, small size and light weight. It is suitable for various rails
of 43~75kg/m.
PRODUCT SPECIFICATIONS
Model
NQG-5.1
Power supply
GX270 petrol engine 5.lkW
Linear speed of cutting disc
70m/s
Working efficiency
2 min( cut off 60kg/m rail)
Weight
50KG
29752 Transportation Air Rail Auto Components Suppliers
Short on time? Let Transportation Air Rail Auto Components sellers contact you.
