K1270 Rail Cutting Machine 1. Gasoline engine: two-stroke, air-cooled , single-cylinder 2. Power: 5.9kw 3. Grinding wheel: double reinforced wire mesh 4. Maximum linear velocity: 100m /s 5. Rated R.M.P : 5100 �± 100r / min 6. Grinding wheel size: �? 350 �? 25.4 T 3.8 / 4.2mm 7. Cutting accuracy: a. Vertical deviation between incision and longitudinal direction of the rail: 0.40mm b. Plane deviation between bidirectional cutting interface: 0.35mm 8. Cutting depth: 125mm 9. Cutting time: 120s ( for 60kg/m rail) 10. Machine weight: 28kg 11. Fuel tank capacity: 1.25L 12. Overall size: 850 480 500mm
Product Description NQG5III Rail Cutting Machine NQG5III Internal combustion rail cutting machine is suitable for cutting rails of 43kg/m75kg/m . The quality of cutting section meets the requirement of railway industrial standards. Its a necessary tool used in railway overhaul, maintenance and rush repairing operation. It has features of fast cutting speed, high utilization rate of thin grinding wheel, high quality of cutting section, easy operation, easy movement, safe use and wide application range etc. Specification Model NQG5III Type Rail Cutting Machine Material Stainless Steel Dimensions (L x W x H) (mm) 670*600*510mm Internal combustion engine HONDA GX200 Engine Power 4.8kW Engine Speed 3600r / min Thin grinding wheel (spindle) Spindle speed 3030r / min Specification (linear velocity) 400 * 32 * 4 (70m /s) Cutting time 60kg / m rail, 120S Number of usage 50kg /m rail, use 4 times 60kg /m rail, use 3 times Machine weight 39.5kg
Product Description NQG-5.8 Abrasive Rail Saw NQG-5.8 lightweight abrasive rail saw is a railway maintenance tool. It not only cuts rails with high speed and high quality, but also has low wear cutting discs. It is locked by rail clamps. It has a simple structure, light weight, safety and easy movement. It is suitable for maintenance, repair of broken rails of seamless tracks, and cutting of steel rails in long rail welding factories. Specification Model NQG-5.8 Type Rail Cutting Machine Material Stainless Steel Dimensions (L x W x H) (mm) 850*480*500mm Engine Single-cylinder, air-cooling two-stroke petrol engine (imported from Sweden K1270R)5.8 kW Cutting disc form Double- layer reinforced wire mesh Linear speed of cutting disc 100 m/s Rated RPM 4500 r/min Specification of cutting disc �?355x�?25.4 x3.8mm Cutting accuracy Vertical deviation of notch and railâ?¤0.30mm Deviation of bidirectional cutting interfacesâ?¤0. 35mm Cutting time â?¤110s( cut off 60kg/m rail) Fuel tank capacity 1.25 L Weight 22kg
Product Description NQG-5.8 Abrasive Rail Saw NQG-5.8 lightweight abrasive rail saw is a railway maintenance tool. It not only cuts rails with high speed and high quality, but also has low wear cutting discs. It is locked by rail clamps. It has a simple structure, light weight, safety and easy movement. It is suitable for maintenance, repair of broken rails of seamless tracks, and cutting of steel rails in long rail welding factories. Specification Model NQG-5.8 Type Rail Cutting Machine Material Stainless Steel Dimensions (L x W x H) (mm) 850*480*500mm Engine Single-cylinder, air-cooling two-stroke petrol engine (imported from Sweden K1270R)5.8 kW Cutting disc form Double- layer reinforced wire mesh Linear speed of cutting disc 100 m/s Rated RPM â?¥4500 r/min Specification of cutting disc �?355x�?25.4 x3.8mm Cutting accuracy Vertical deviation of notch and railâ?¤0.30mm Deviation of bidirectional cutting interfacesâ?¤0. 35mm Cutting time â?¤110s( cut off 60kg/m rail) Fuel tank capacity 1.25 L Weight 22kg
Product Description NQG-5.8 Abrasive Rail Saw NQG-5.8 lightweight abrasive rail saw is a railway maintenance tool. It not only cuts rails with high speed and high quality, but also has low wear cutting discs. It is locked by rail clamps. It has a simple structure, light weight, safety and easy movement. It is suitable for maintenance, repair of broken rails of seamless tracks, and cutting of steel rails in long rail welding factories. Specification Model NQG-5.8 Type Rail Cutting Machine Material Stainless Steel Dimensions (L x W x H) (mm) 850*480*500mm Engine Single-cylinder, air-cooling two-stroke petrol engine (imported from Sweden K1270R)5.8 kW Cutting disc form Double- layer reinforced wire mesh Linear speed of cutting disc 100 m/s Rated RPM 4500 r/min Specification of cutting disc 355x25.4 x3.8mm Cutting accuracy Vertical deviation of notch and rail0.30mm Deviation of bidirectional cutting interfaces0. 35mm Cutting time 110s( cut off 60kg/m rail) Fuel tank capacity 1.25 L Weight 22kg
Product Description NQG-5.8 Abrasive Rail Saw NQG-5.8 lightweight abrasive rail saw is a railway maintenance tool. It not only cuts rails with high speed and high quality, but also has low wear cutting discs. It is locked by rail clamps. It has a simple structure, light weight, safety and easy movement. It is suitable for maintenance, repair of broken rails of seamless tracks, and cutting of steel rails in long rail welding factories. Specification Model NQG-5.8 Type Rail Cutting Machine Material Stainless Steel Dimensions (L x W x H) (mm) 850*480*500mm Engine Single-cylinder, air-cooling two-stroke petrol engine (imported from Sweden K1270R)5.8 kW Cutting disc form Double- layer reinforced wire mesh Linear speed of cutting disc 100 m/s Rated RPM 4500 r/min Specification of cutting disc 355x25.4 x3.8mm Cutting accuracy Vertical deviation of notch and rail0.30mm Deviation of bidirectional cutting interfaces0. 35mm Cutting time 110s( cut off 60kg/m rail) Fuel tank capacity 1.25 L Weight 22kg
Product Description NQG5.1 Rail Cutting Machine To furnish the varying desires of our customers, we are immersed in offering a world class consignment of Abrasive Rail Cutter. Abrasive Rail Cutter is suitable for cutting upto 60 Kg. 110 uts Rails. the machine has features of fast cutting speed, high utilization rate of cutting discs, high quality of cutting profile, convenient operation, easy motion and safe use. the machine comprises of petrol driven engine, integrated with a cutting unit fitted with an abrasive disc. Specification Model NQG-5.1 Type Rail Cutting Machine Material Stainless Steel Dimensions (L x W x H) (mm) 800*560*500mm Engine GX270 petrol engine 5.1KW Specification of cutting disc 400*32 *4mm Cutting disc no. of revolutions 3320 r/min Linear speed of cutting disc 70m/s Cutting accuracy Verticality0. 4mm, flatness0.3mm Cutting time 2 min ( cut off 60kg/m rail) Weight 50kg
Product Description The Battery powered rail cutting machine has passed the strict verification of protection grade, and supports the work in rainy and snowy weather; Professional lithium battery platform for ultra long endurance operation; The equipment can be used normally under extreme conditions such as high cold and high altitude; The lithium battery has passed the safety test conducted by the national authority. Specification Voltage 72V Power 5KW Cutting time
Hydraulic Railway Track Jack It is new type equipment that is used on the railway line's maintenance and repairing. The most important feature of this machine is that is a dual-purposed machine what meet the needs of the lifting work of the line, as well satisfy lining operations. Hydraulic Track Lifting and Lining Tool is mainly composed of: power part, operating mechanism, body, running gear, landing gear, hook rail device, starting device, dialing device, lower guiding device, lower track, etc. Hydraulic Track Lifting and Lining Tool is specially used for the railway track maintenance. It is used for the track lifting and lining. It has features with simple and compact structure, simple and flexible operation, easy maintenance,fast and reliable performance when go up and down the track Specification Model YBD-245A Type Hydraulic Railway Track Material Stainless Steel Rated lifing force/ Rated lining force(kN) 245/145 Maximm lifting Quantity/ lining quantity(mm) 135/95 Weight(kg) 23
This digital railway offset ruler is special equipment which is used for railway turnout offset distance and frame size. Measuring the distance between the working edge of straight stock rail and the closure rail working edge. Model: LJ-SZJC-I Type:Digital Rail Offset Scale Ruler Material: Aluminum alloy Dimensions (L x W x H) (mm):1710*35*40cm Type: Digital Measuring Rang:100-1400mm or Customization Indication Error: ±0.4mm Accuracy:0.05mm Insulation Resistance: 1M
Rail Laser Versine Alignment Device is used for measuring track level and line to aid track measurement and hand tamping operations. It can measure the Horizontal and the Vertical . It is mainly composed of laser transmitting device, target positioning device and moving positioning target device . BENEFITS 1.Quick Installation The operator can put this device on the track in seconds 2.Saving money in repeat work and accuracy 30m at a time with 99.99% reduction on repeat works and rapid deployment 3. Vernier adjustment knob ensuring accurate readings The vernier adjustment knob assist the operator to ensure a perfect horizontal position ensuring accurate reading . 4. Stored in a dedicated protective case ,Easy to carry Laser measure distance:30m Laser center spot:10mm30m distance area Point range:horizontal-30+60mm,vertical-30+60mm target positioning device and moving positioning target device resolution:2mm 1 Battery capacity (laser transmitter):Continuous use for 4 hours
This railway offset ruler is special equipment which is used for railway turnout offset distance. Measuring the distance between the working edge of straight stock rail and the closure rail working edge. Model:LG-ZJC Type:Rail Offset Ruler Material:Aluminum alloy Dimensions (L x W x H) (mm):1710*35*40 Measure range:100-1400mm Indication error: ± 0.4mm
The main part of the wheel tread is an inward inclination of 1:40 . In order to make the top of the rail track under the wheel load with cone tread stressed uniformly ,decrease load offset, reduce rail web stress , avoid slit between rail head and rail web, the railway track shall not be laid upright for straight line, it shall be inward inclined ,this inward inclination of rail called Rail Cant, it is a high precision ,portable , numeric rail geometrical testing tool. BENEFITS: 1.Stable performance ,protect electromagnetic interference . 2.One piece structure design ,light and handy ; 3.magnetic self-absorption function ; 4.Data display is clear and intuitive 5.The function of temperature of environmental temperature factors on the measurement data 6.Power saving function :The system will shutdown automatically if there is no operation in 5 minutes . Model:JG-SO1 Power Supply Mode: Built-in lithium battery charging Operating Temperature:-30° +60° Measuring Range:±110 ±1200 Operating Current:40mA Size:225*90*60mm
LJ-HGM Sliding Rail Wear Measuring Gauge Sliding rail wear measuring gauge is used to measure the rail profile vertical wear and side cut value and switch rail desent value. It is Digital display reading, The reasonable design makes it light ,easy to operate and intuitive in reading. Model: LJ-HGM Type: Rail Wear Gauge Material: Stainless Steel Vertical wear:0-15mm Lateral wear:0-15mm Score value:0.01mm Indication error: ± 0.15mm
The Rail Wear gauge block is used for calibrating andmeasuring the Zero error and uncertainty of the railwear gauge . It can be customized according to rail typeIt is made up of the base , Standard reference block anddeputy blocks. Model:LJ-JM-LK Type:Rail Wear Gauge Calibration Block Material:Stainless Steel Model:LJ-JM-LK Application:Rail Wear Gauge Weight:2kg Can customized for different Rail Type
The switch rail lateral wear gauge is used to measure the switch rail lateral wear and descent height value of the switch rail ,it can be used for all the type of switch rail. BENEFITS:Switch Rail Lateral Wear Gauge has the advantages of high measuring accuracy,easy to operate,high reliability,small volume,light weight etc. Model:LJ-JGCM-I Type:1.Vertical Ruler:Digital 2.Lateral Ruler:Digital Measure Range:1.Vertical Ruler:92-193 2.Lateral Ruler:0-120 Resolution:Digital Ruler:0.01 Accuracy:0. 01 Calibration Block:Optional
"Digital corrugation Wear Gauge is a direct reading measuring tool which is used straight vertical measurement method. It is mainly used for measuring rail top surface and side surface corrugation wear value. BENEFITS Its simple in operation, compact in size, easy to carry, high precision in measurement, reliable in installation and positioning, simple in use Convenient; Easy to site construction, ensure the quality of work." "Model LJ-BM-A(mm) Horizontal measure range 1000 Vertical measure range -8 - +25 Accuracy ±0.05 Resolution 0.01 Repeat error 0.02 Working temperature -5 - 40"
"Mechanical Rail Wear Gauge is mainly used to measure the vertical wear and lateral wear of the rail. The reasonable design makes it convenient operation and intuitive reading. FEATURE Analogue Rail Wear Gauge is easy to operate, high reliability, small volume, light weight etc." "Model LJ-GM-B Vertical wear measure range0-15mm Lateral wear measure range0-25mm Score value0.1mm Supply CustomizeUIC60/60E1, UIC54 /54E1, 115RE 68TR ect all profiles Block customize block for gauge"
Digital Rail Head Wear Gauge is is mainly used to measure the vertical wear and lateral wear of the rail. The reasonable design makes it light, convenient operation and intuitive reading. FEATURE 1. Digital type with direct readings: LCD display screen, clear and readable; No calculations required, gives direct reading ; When reading, hold down the HOLD button to fix the measurement value and facilitate reading. 2. High measuring accuracy : The measurement accuracy is 0.01m 3. Easy to use, measure the vertical and lateral rail wear at the same time, Position the rail wear gauge on the outer side of the rail . Push the vertical and lateral rail wear gauge so that the measuring probe is in contact with the upper surface and inner side of the rail respectively. Then the vertical and lateral wear of the rail can be read. 4. Metric /imperial unit 5. Support customize: We could customize all kinds wear gauge according to different rail profiles and different measure points. 6.Fast calibrate: One-key zero clearing function, can be quickly calibrated before each use to reach the factory measurement accuracy. 7. Magnetic fixed part: Strong magnetic fixed part to attach to the rail. 8. Rail fillet as measuring base to ensure measure data more accuracy Rail fillet is more clear than rail bottom, no dust. It could ensure the measure result reliability. 9. Portable Handle : This product is designed with a handle that is easy to hold, which greatly improves the portability of the product. It can avoid touching the ruler body directly, cause the ruler body to be stained and corroded, improve the product service life. Model LJ-GM-A Center vertical wear measure range0-15mm Lateral wear measure range0-25mm Score value0.1mm Indication error ± 0. 15mm Supply CustomizeUIC60/60E1, UIC54 /54E1, 115RE 68TR ect all profiles Block customize block for gauge
Digital Rail Frog Wear Gauge is used to measure vertical wear value of frog point rail and wing rail at any sections.Also could be used for measuring decrease value of point rail relative to wing rail. Model LJ-ZCM-A Type Digital Rail Frog Wear Gauge Material Stainless Steel Dimensions (L x W x H) (mm)380*166*25mm Measure range0~40mm Score value0.01mm Indication error ± 0. 15mm Working tempareture-10~+40 Main ruler measure range0~380mm
