Product Description Model No.CTY8/6,7,9G Specifications Adhesive / total weight (t) 8 Track gauge (mm) 600,762 or 900 Traction (KN) 12.83 Max. Traction (KN) 19.62 Speed(km/h) 7.8 Max. Speed(km/h) 15.6 Battery Voltage (V) 140V Battery Capacity (Ah) 440 Power (KW) 15*2 Dimensions Length(mm) 4500 Width(mm) 1050,1212,1350 Height(mm) 1600 Coupler height(mm) 320/430 Wheelbase (mm) 1100 Wheel diameter (mm) 680 Min Curve radius (m) 7 Controller Resistance or IGBT Braking method Mechanical Brake Electrical Brake Our Service Pre-sales Service: The wide product range enables us to provide our customers with individual machines or complete processing plants.Based on our customers'request and budget, our experts make efficient and reliable solutions, and we produce strictly follow customers' order. What's more, every customer has the chance to visit the working machine in the site before placing the order. After-sales Service: Experienced technicians guidance is available on the phone, and on the internet. One or more engineers will be dispatched to the quarry site to help install the customers'plants.Necessary training about machine daily maintenance to local workers is provided also. Methods of Payment:  T/T (Telegraphic Transfer) or Western Union or L/C at sight Handling time for an order: Within 10 days supplied from stock Shipping method: Sample order: we suggest Courier express like DHL/UPS/TNT/FedEx or by air Bulk order: we suggest by air or by sea. Quality Control: We have our own experienced QC. There will be strict inspection and testing for every order before shipping out. 5. After Services: a. Our sales team will response for your question within 24 hours (Holidays Excluded) b. Technical Support will be available in any time c. Free replacement will provide once the failure confirmed caused by our product quality
Name: Battery Electric Locomotive, Underground Mining Locomotive, Application: On narrow rail guage Service: Transportation in mining ,tunneling and related construction There are trolley electric locomotives and battery electric locomotives Trolley electric locomotives:1.5 tons to 80 tons Battery electric locomotives: 2.5 tons to 55 tons If there are explosive gas, then the explosion proof battery locomotive can be available. Model: CTY2.5/6,7,9G Adhesive weight :2.5 tons Track guage:600,762,900 mm Hourly system traction: 2.55kn Max. traction: 6.13kn Hourly sstem speed: 4.54km/h Supply Voltage: 48v Capacity of traction battery: 308 or 300 ah Power of motor 3.5kw*1 Dimensions: 2360*914/1076/1214*1550MM Wheelbase 650mm Wheel diameter 460 mm Height of traction :320 mm MIN. turning radius :5 mm Speed regulating mode resistance or IGBT Brake mode: mechanical brake About us Founded in 1994 ,We are one of the top manufactures of narrow gauge electric locomotives for mining, tunneling, and related industries in China. More than thirty thousand sets of locomotives have been sold home and abroad. Furthermore, we are the only manufacture in this field to produce the matching electric motors, batteries and electric control system. Including the luxury carried electric locomotive, underground portable capsule and emergency refuge chamber. The range of the electric locomotive can be 1.5 T to 80T with kinds of certificates, such as coal security certificate(MA), anti explosion certificate, production license, ISO 9001:2008, and the honor AAA Quality Credit Grade, National High-Tech Enterprise, China Famous Brand and so on . We always believe that Quality First, Reputation Above All. Overseas service is provided. If you want to know us ,please contact me any time. Regards Locomotive : nude package spare parts: wood cartons
Isi group, is a collection branch, engineering, trade and services as an integrated group of companies, the group was founded in 1992 in paris, france, the existing six companies and two offices are situated in china and europe the five cities. Isi (beijing) golden age international industry&trade co., ltd is specializing in rail transportation items exportation with good reputation.It includes train carriage, train parts, locomotive container, special transportation minerals & metallurgy steel, rails steel scrap, iron scrap, other metals & metal products , aluminum parts , metal injection molding, cnc milling & turning, gear hobbing & grinding, cold roll forming, production tooling, frp products for railway cars, and so on.
we provide molds and dies for plastic injection molding, metal injection molding, die casting, and roll forming, among which the metal injection molds and roll forming dies are our specialties. Capabilities Plastic molds 1,000,000 cycles Metal injection molds 200,000 cycles Pressure casting dies 100,000 cycles Rolling die set with minimum passes Plastic and metal injected components Zinc and aluminum die cast components Carbon and stainless steel roll-formed components Export toolings with custom interface matching your machines Export tooling spare parts and after-sale support available
Wheel set- oem part We produce wheel set as per customers' drawings and specifications. We offer the products according to international standards JIS, DIN, BS and ANSI. We provide the products with fine quality and at competitive price. We are certified by the ISO9001:2000 quality system. The wheel sets we produce are widely used in mining, metallurgy and port.Our wheel sets are exported to europe and got well received by the customers there. Wooden case or according to customers' requirement.
Forged wheel set plus welded box Material : wheel set: 42crmo4, house: S355J2 Wheel diameter range: 300~1200mm tread hardness: HB400~450 Wheel box -forged product exported to Italy, Switzerland Wooden case package. Sea worthy packing, or according to customers' requirement
We produce as to international standards. IS, din, BS and ANSI. We provide products with fine quality and at competitive price. We are certified by the ISO9001:2000 system.All of the crawler pads we manufacture are exported to Germany and our quality are well received by the customers there .There is a stable demand yearly from German customers. Wooden package or according to customers' requirement
Clutch, pump, sensor, relay, motor.
auto parts-filters.
Soosan hydraulic breakers and excavator attachments, for all excavator brands.
Auto Parts..
Auto rickshaw spare parts.
Auto Rickshaw Spare Parts..
10 ton mining tunnel locomotive The model has two types of nominal working voltage: 250v and 550V. It applies main driving mode, IGBT shear wave type speed control or resistance type or VF type. The main features include: short wheelbase, high rigidity of the vehicle body and good crashproof performance. The type of braking is mechanical or electrical. Both mechanical and electrical braking have a safe and reliable effect. Adhesive/total weight (t): 10 tons Track width (mm): 600,762,900 Tensile (KN): 13.05 18.93 Max. Tensile (KN): 24.5 Speed â??â??(km/h): 11, 10.5 Power (KW): 21*2 30*2 24*2 Dimensions Length (mm): 4550, 4650 Width (mm): 1050, 1212 or 1350 Height (mm): 1600 Wheelbase (mm): 1100 Wheel diameter (mm): 680 Minimum curve radius (m): 7.10 Driver: Resistor or IGBT Braking method: Mechanical
3 ton trolley wire locomotive for mining What Should We Pay Attention to When Using Underground Mining Electric Locomotives? Operating underground mining electric locomotives is a critical task that requires a high level of responsibility and safety awareness. To ensure safe operation, operators should heed the following guidelines: Monitor Bearing Temperature: Pay close attention to the temperature of the axle box, motor bearings, and gearbox bearings to prevent overheating and potential damage. Be aware of any burning smells, as this is a typical sign of overheating bearings. Regularly check the bearing lubrication oil to ensure it is adequate and meets the required specifications. Inspect the Brake System: Regularly inspect the brake shoes for wear and replace or adjust them as necessary. Ensure the brake system is functioning correctly, and that the braking distance meets specified requirements. Periodically clean the brake system of dust and grease to maintain its cleanliness and efficiency. Immediately Address Electrical Equipment Failures: If any electrical equipment, lights, or horns fail, cease operations immediately and take the locomotive to the garage for repairs. Do not continue to operate the locomotive with any faults, as this could lead to safety incidents. Strictly Follow Shift Handover Procedures: At the end of a shift, operators should conduct a thorough inspection of the locomotive, including: Checking bearing temperatures, the brake system, and electrical equipment. Inspecting the locomotive's exterior for any damage. Listening for any unusual sounds from the locomotive. Record all inspection results in the shift handover log to inform the incoming operator of the locomotive's condition. Additional Precautions: Adhere strictly to the mine's management regulations. Familiarize yourself with the locomotive's operating procedures and maintenance methods. Regularly participate in safety training and drills to enhance safety awareness and emergency response capabilities. By strictly following these precautions, operators can effectively prevent accidents when using underground mining electric locomotives, ensuring their own safety and the safety of others. Adhesive weight (t) : 3 ton Track gauge (mm) : 600.762.900 Traction (KN) : 6.1 or 5.74 Max. Traction (KN) : 7.36 Speed(km/h) : 10.6 7.5 Power (KW) : 12KWx1 6.5KWX2 Dimensions Length(mm) : 2700, 2750 Width(mm) : 940,1102 or 1240 Height(mm) : 1550, 1500 Wheelbase (mm) : 816, 850 Wheel diameter (mm) : 650, 850 Min Curve radius (m) : 5.7 6 Controller : Resistencia or IGBT Braking method : Mechanical
8 ton battery electric locomotive for metal mine Total weight (t) : 8 ton Track gauge (mm) : 500.600.762.900 Traction (KN) : 11.18 or 12.83 Max. Traction (KN) : 19.62 Speed(km/h) : 6.2~7.8 Battery Voltage (V) : 110~140V Battery Capacity (Ah) : 440 Power (KW) : 11 or 15 KWx2 Dimensions Length(mm) : 4420 Width(mm) : 920,1082 or 1220 Height(mm) : 1600 Wheelbase (mm) : 1100 Wheel diameter (mm) : 680 Min Curve radius (m) : 7 Controller : Resistencia or IGBT Braking method : Mechanical or air brake
CJY14 ton trolley wire locomotive The locomotive is a new product specially designed for large mines. It applies IGBT speed control way, realizes smooth starting and low failure rate, and is a new- generation energy efficient product. Main features include: small outer diamensions, short wheel base, small turn radius, high speed and strong traction force. V-shape rubber damps are used on this locomotives in order to bear viration and impact from lengthways, vertical and transverse directons. The sails are elastic rubber plates which can ensure a reduced shock in operation. Adhesive / total weight (t) : 14 ton Track gauge (mm) : 600.762.900 Traction (KN) : 26.68 Max. Traction (KN) : 34.3 Speed(km/h) : 12.87 Power (KW) : 52 2 Dimensions Length(mm) : 4800 Width(mm) : 1060,1222or 1360 Height(mm) : 1700 Wheelbase (mm) : 1700 Wheel diameter (mm) : 760 Min Curve radius (m) : 12 Controller : Resistencia or IGBT Braking method : Mechanical
5 ton battery locomotive for underground mine Battery electric locomotive is a kind of track traction equipment powered by batteries, which is generally used in mines. There are two types of battery electric locomotives, explosion-proof type and ordinary type. The explosion-proof type is mainly used in coal mines. There are also many options in terms of speed regulation and braking methods. Speed control methods include resistance speed control, chopping speed control and frequency conversion speed control. Braking methods include pure mechanical braking, hydraulic braking and compressed air braking. In addition, electric braking can also be selected as an auxiliary braking method. Adhesive / total weight (t) : 5 ton Track gauge (mm) : 600.762.900 Traction (KN) : 7.06 Max. Traction (KN) : 12.26 Speed(km/h) : 7 Voltage (V) : 250V Power (KW) : 7.5 KWx2 Dimensions Length(mm) : 3170 Width(mm) : 920,1082or 1220 Height(mm) : 1550 Wheelbase (mm) : 850 Wheel diameter (mm) : 520 Min Curve radius (m) : 6 Controller : Resistencia or IGB or VF controller Braking method : Mechanical/Hydraulic brake
10t mining trolley locomotive for mining The model has two kinds of working rated voltage:250v and 550V. It applies primary driving way, speed control of IGBT chopping wave type or resistor type or VF type. Main fetures include:short wheel base, high stiffness of vehicle body, and good shockproof performance. The braking type is mechanical or electric braking. Both mechanical braking and electric brking have safe and reliable effect. Adhesive / total weight (t) : 10 ton Track gauge (mm) : 600.762.900 Traction (KN) : 13.05 18.93 Max. Traction (KN) : 24.5 Speed(km/h) : 11, 10.5 Power (KW) : 21*2 30*2 24*2 Dimensions Length(mm) : 4550, 4650 Width(mm) : 1050,1212or 1350 Height(mm) : 1600 Wheelbase (mm) : 1100 Wheel diameter (mm) : 680 Min Curve radius (m) : 7,10 Controller : Resistencia or IGBT Braking method : Mechanical
2.5 ton battery locomotive with IGBT control Battery electric locomotive is a kind of track traction equipment powered by batteries, which is generally used in mines. There are two types of battery electric locomotives, explosion-proof type and ordinary type. The explosion-proof type is mainly used in coal mines. There are also many options in terms of speed regulation and braking methods. Speed control methods include resistance speed control, chopping speed control and frequency conversion speed control. Braking methods include pure mechanical braking, hydraulic braking and compressed air braking. In addition, electric braking can also be selected as an auxiliary braking method. Adhesive / total weight (t) 2.5ton Track gauge (mm) 600,762 or 900 Traction (KN) 2.55 Max. Traction (KN) 6.13 Speed(km/h) 4.54 Battery Voltage (V) 48 Battery Capacity (Ah) 330 Power (KW) 3.5 1 Dimensions Length(mm) 2360 Width(mm) 914,1076 or 1214 Height(mm) 1550 Wheelbase (mm) 650 Wheel diameter (mm) 460 Min Curve radius (m) 5 Controller : Resistance or IGBT Braking method : Mechanical Brake
