10pcs/ctn
Product process: 1. Using the rotational molding process imported from abroad, the whole is formed at one time, with the characteristics of no welding and no leakage. 2. Polyethylene PE imported from South Korea as raw material, tasteless. Product Features: It is integrated molding, not easy to leak, tough texture, high product accuracy, clean and beautiful water tank, beautiful appearance, not easy to stain, can easily remove dirt. Collision resistance, impact resistance, good heat and frost resistance, can be used in the environment of minus 40 degrees Celsius to 60 degrees Celsius, anti-ultraviolet, not easy to embrittle, odorless, good acid and alkali resistance, convenient installation and transportation, simple to use, long time to use. Colors can be customized according to customer needs.
Product process: 1. Using the rotational molding process imported from abroad, the whole is formed at one time, with the characteristics of no welding and no leakage. 2. Polyethylene PE imported from South Korea as raw material, tasteless. Product Features: It is integrated molding, not easy to leak, tough texture, high product accuracy, clean and beautiful water tank, beautiful appearance, not easy to stain, can easily remove dirt. Collision resistance, impact resistance, good heat and frost resistance, can be used in the environment of minus 40 degrees Celsius to 60 degrees Celsius, anti-ultraviolet, not easy to embrittle, odorless, good acid and alkali resistance, convenient installation and transportation, simple to use, long time to use. Colors can be customized according to customer needs.
Solvent road marking paint, also known as cold paint, road marking paint, is an economical marking paint. Due to its low construction cost per unit area, rapid drying, high construction efficiency and strong application, it is widely used in urban roads and general roads in China, including urban roads, national roads, provincial roads, pedestrian crossings, and residential parking lots. "Yida" brand high-quality cold paint adjustment technology formula, the use of superior materials to develop new cold paint, in terms of gloss, color and coverage rate and other performance greatly exceed the market similar products. The company provides fixed cooling paint according to customer needs.
Thermoplastic reflective road marking paint is a new type of pavement marking paint developed on the basis of the original hot-melt road marking paint by appropriate improvement of coating formulation and construction technology. It is mainly composed of C5 petroleum resin, and various additives, pigments, hot-melt special glass beads, etc. are added to form a powdery solid coating, which is heated from 180 ° C to 220 ° C by a hot melt kettle.
Crowd Control Barrier, also known as pedestrian barrier, is an effective crowd control and site demarcation product extensively used in public areas, such as event, sport venue, public rallies, demonstration, outdoor festival, concerts. They are considered versatile with the following functions: Direct pedestrian traffic. Keep the crowd in a designated area. Protect cordoning off restricted areas. Designate space for lines. Control large gatherings. Deter motorists and pedestrian entering. Create allocated walkways. Also can be used at construction sites and road works We can custom Temporary Fence
Ground protection mats are tough and versatile enough for a huge range of applications. They are used extensively for construction, oil, gas and water well drilling, geotechnical applications, landscaping and grounds maintenance, concrete supply, excavation and trenching, caravan and leisure parks and endless other uses.They can protect turf from damage when heavy vehicles need to cross grassed areas and prevent equipment and vehicles from losing traction or sinking into soft ground and sand.The mats do not suffer from the problems associated with using plywood for temporary roadways. They are virtually unbreakable, are not affected by water (no absorption, warping, rotting, delaminating) so can withstand the toughest conditions. Specification: sizes:2000x1000mm,3000x1500mm,2440x1220mm,2440x601mm,2900x1100mm,3000x2000mm,4000x2000mm thickness:12.7mm,15mm,18mm,19mm,20mm,25mm color:black,red,blue ect
YT Nano-fluorescent self-luminous cat eye road stud delineator with glass beads Self-luminous series These self-luminous road studs and delineators are highly durable devices, providing day and night visibility in adverse weather conditions. These are reflector type road stud offering a long response time and reflect light from vehicles headlight back to the driver's eye. They are used to provide distinct outline of pavement markings during poor visible conditions under fog and bad weather conditions. The fluorescent part is made of nano - fluorescent material. The greatest convenience is that they dont need any electric power or solar panel. Only with light, not even the sunshine, it can also absorb the daylight and storage it in the polymer material made part. Till the night, it shines out and guide the drivers for road safety. For further usage of warning purpose, LED solar road stud can also be combined with self-luminous function so that it provides drivers double safety guarantee. Product Code YF10 Product name YT Nano-fluorescent self-luminous cat eye road stud delineator with glass beads Material ABS+glass beads+Nano-fluorescent material Color white/ yellow/ red/ green/ black Size 110mmÃ?110mmÃ?66mm Weight 138g Application reflective panel, road stud, delineator, speed humb, etc, Feature light weight, lower cost-effecitve, high reflectivity, long-lasting, easy installation, wide range of application Payment terms T/T, L/C, Western union, Trade Assurance YF10 (2)YF10 (3)YF10 (5)YF10 (4)YF10 (1)YF10 (1)YF10 (3)YF self-luminating series table of brightnessYetong road studplastic road stud_application Procedures and precautions for installation of road stud. 1.Environment: keep the ground clean, out of water and dust. The ground must be dry. 2.Drill hole on the ground: drill holes according to the distance of the two holes on the road stud. Then put the road stud on and make holes to holes match and clear the dust. If the spike is with anchor, then drill a hole 5mm deeper than the anchor to put it into the hole. And also need to put some glue into the hole. 3.Ratio of resin glue: make it 1:1 with the A and B type of resin glue. It will dry faster in summer than winter. 4.Apply glue: use a tool to take 5g glue and put it on the bottom of the road stud. Then put the road stud immediately on the ground. Finally install the screws. 5.Inspection: inspect whether the bottom is empty or not in case the glue comes out. 6.Time of solidification: it takes one day in winter and half day in summer.
YT round circle self-fluorescent double sided road stud with reflective film Self-luminous series These self-luminous road studs and delineators are highly durable devices, providing day and night visibility in adverse weather conditions. These are reflector type road stud offering a long response time and reflect light from vehicles headlight back to the driver's eye. They are used to provide distinct outline of pavement markings during poor visible conditions under fog and bad weather conditions. The fluorescent part is made of nano - fluorescent material. The greatest convenience is that they dont need any electric power or solar panel. Only with light, not even the sunshine, it can also absorb the daylight and storage it in the polymer material made part. Till the night, it shines out and guide the drivers for road safety. For further usage of warning purpose, LED solar road stud can also be combined with self-luminous function so that it provides drivers double safety guarantee. Product Code YF05 Product name YT round circle self-fluorescent double sided road stud with reflective film Material ABS+reflective film+Nano-fluorescent material Color white/ yellow/ red/ green/ black Size Ï?100mmÃ?11mm Weight 88g Application reflective panel, road stud, delineator, speed humb, etc, Feature light weight, lower cost-effecitve, high reflectivity, long-lasting, easy installation, wide range of application Payment terms T/T, L/C, Western union, Trade Assurance YF05 (6)YF05 (2)YF05 (5)YF05 (6)YF05 (1)YF05 YF05 (2)YF self-luminating series table of brightnessYetong road studplastic road stud_application Procedures and precautions for installation of road stud. 1.Environment: keep the ground clean, out of water and dust. The ground must be dry. 2.Drill hole on the ground: drill holes according to the distance of the two holes on the road stud. Then put the road stud on and make holes to holes match and clear the dust. If the spike is with anchor, then drill a hole 5mm deeper than the anchor to put it into the hole. And also need to put some glue into the hole. 3.Ratio of resin glue: make it 1:1 with the A and B type of resin glue. It will dry faster in summer than winter. 4.Apply glue: use a tool to take 5g glue and put it on the bottom of the road stud. Then put the road stud immediately on the ground. Finally install the screws. 5.Inspection: inspect whether the bottom is empty or not in case the glue comes out. 6.Time of solidification: it takes one day in winter and half day in summer.
YT Factory Energy Storage Self-luminous Highway Road Reflective Delineator as Traffic Signs Self-luminous series These self-luminous road studs and delineators are highly durable devices, providing day and night visibility in adverse weather conditions. These are reflector type road stud offering a long response time and reflect light from vehicles headlight back to the driver's eye. They are used to provide distinct outline of pavement markings during poor visible conditions under fog and bad weather conditions. The fluorescent part is made of nano - fluorescent material. The greatest convenience is that they dont need any electric power or solar panel. Only with light, not even the sunshine, it can also absorb the daylight and storage it in the polymer material made part. Till the night, it shines out and guide the drivers for road safety. For further usage of warning purpose, LED solar road stud can also be combined with self-luminous function so that it provides drivers double safety guarantee. Product Code YF18 Product name YT Factory Energy Storage Self-luminous Highway Road Reflective Delineator as Traffic Signs Material Aluminium+Nano-fluorescent material Color white/ yellow/ red/ green/ black Size 150mmÃ?150mm Weight 48g Application reflective panel, road stud, delineator, speed humb, etc, Feature light weight, lower cost-effecitve, high reflectivity, long-lasting, easy installation, wide range of application Payment terms T/T, L/C, Western union, Trade Assurance YF18 (4)_YF18YF18__ YF18 (3)YF18 (2) YF self-luminating series table of brightnessYetong road studplastic road stud_application Procedures and precautions for installation of road stud. 1.Environment: keep the ground clean, out of water and dust. The ground must be dry. 2.Drill hole on the ground: drill holes according to the distance of the two holes on the road stud. Then put the road stud on and make holes to holes match and clear the dust. If the spike is with anchor, then drill a hole 5mm deeper than the anchor to put it into the hole. And also need to put some glue into the hole. 3.Ratio of resin glue: make it 1:1 with the A and B type of resin glue. It will dry faster in summer than winter. 4.Apply glue: use a tool to take 5g glue and put it on the bottom of the road stud. Then put the road stud immediately on the ground. Finally install the screws. 5.Inspection: inspect whether the bottom is empty or not in case the glue comes out. 6.Time of solidification: it takes one day in winter and half day in summer.
YT transparent self-luminous ABS road stud delineator as a traffic signal Self-luminous series These self-luminous road studs and delineators are highly durable devices, providing day and night visibility in adverse weather conditions. These are reflector type road stud offering a long response time and reflect light from vehicles headlight back to the driver's eye. They are used to provide distinct outline of pavement markings during poor visible conditions under fog and bad weather conditions. The fluorescent part is made of nano - fluorescent material. The greatest convenience is that they dont need any electric power or solar panel. Only with light, not even the sunshine, it can also absorb the daylight and storage it in the polymer material made part. Till the night, it shines out and guide the drivers for road safety. For further usage of warning purpose, LED solar road stud can also be combined with self-luminous function so that it provides drivers double safety guarantee. Product Code YF14 Product name YT transparent self-luminous ABS road stud delineator as a traffic signal Material ABS+PMMA+Nano-fluorescent material Color white/ yellow/ red/ green/ black Size 180mmÃ?48mmÃ?40mm Weight 120g Application reflective panel, road stud, delineator, speed humb, etc, Feature light weight, lower cost-effecitve, high reflectivity, long-lasting, easy installation, wide range of application Payment terms T/T, L/C, Western union, Trade Assurance YF14 (6)_YF14 (1)_YF14 (6)YF14 (1)YF14 (1)_YF14 (1)YF14 (2)YF self-luminating series table of brightnessYetong road studplastic road stud_application Procedures and precautions for installation of road stud. 1.Environment: keep the ground clean, out of water and dust. The ground must be dry. 2.Drill hole on the ground: drill holes according to the distance of the two holes on the road stud. Then put the road stud on and make holes to holes match and clear the dust. If the spike is with anchor, then drill a hole 5mm deeper than the anchor to put it into the hole. And also need to put some glue into the hole. 3.Ratio of resin glue: make it 1:1 with the A and B type of resin glue. It will dry faster in summer than winter. 4.Apply glue: use a tool to take 5g glue and put it on the bottom of the road stud. Then put the road stud immediately on the ground. Finally install the screws. 5.Inspection: inspect whether the bottom is empty or not in case the glue comes out. 6.Time of solidification: it takes one day in winter and half day in summer.
YT hangzhou energy storaged square self-luminous road stud with cat eyes Self-luminous series These self-luminous road studs and delineators are highly durable devices, providing day and night visibility in adverse weather conditions. These are reflector type road stud offering a long response time and reflect light from vehicles headlight back to the driver's eye. They are used to provide distinct outline of pavement markings during poor visible conditions under fog and bad weather conditions. The fluorescent part is made of nano - fluorescent material. The greatest convenience is that they dont need any electric power or solar panel. Only with light, not even the sunshine, it can also absorb the daylight and storage it in the polymer material made part. Till the night, it shines out and guide the drivers for road safety. For further usage of warning purpose, LED solar road stud can also be combined with self-luminous function so that it provides drivers double safety guarantee. Product Code YF01 Product name YT hangzhou energy storaged square self-luminous road stud with cat eyes Material ABS+glass beads+Nano-fluorescent material Color white/ yellow/ red/ green/ black Size 130mmÃ?110mmÃ?15mm Weight 150g Application reflective panel, road stud, delineator, speed humb, etc, Feature light weight, lower cost-effecitve, high reflectivity, long-lasting, easy installation, wide range of application Payment terms T/T, L/C, Western union, Trade Assurance YF01 YF01 YF01 (4)YF01 (1)YF01 (5)YF01 (5)YF01 (3)YF self-luminating series table of brightnessYetong road studplastic road stud_application Procedures and precautions for installation of road stud. 1.Environment: keep the ground clean, out of water and dust. The ground must be dry. 2.Drill hole on the ground: drill holes according to the distance of the two holes on the road stud. Then put the road stud on and make holes to holes match and clear the dust. If the spike is with anchor, then drill a hole 5mm deeper than the anchor to put it into the hole. And also need to put some glue into the hole. 3.Ratio of resin glue: make it 1:1 with the A and B type of resin glue. It will dry faster in summer than winter. 4.Apply glue: use a tool to take 5g glue and put it on the bottom of the road stud. Then put the road stud immediately on the ground. Finally install the screws. 5.Inspection: inspect whether the bottom is empty or not in case the glue comes out. 6.Time of solidification: it takes one day in winter and half day in summer.
YT yellow shell self-luminous rectangle reflector road studs with cat eye Self-luminous series These self-luminous road studs and delineators are highly durable devices, providing day and night visibility in adverse weather conditions. These are reflector type road stud offering a long response time and reflect light from vehicles headlight back to the driver's eye. They are used to provide distinct outline of pavement markings during poor visible conditions under fog and bad weather conditions. The fluorescent part is made of nano - fluorescent material. The greatest convenience is that they dont need any electric power or solar panel. Only with light, not even the sunshine, it can also absorb the daylight and storage it in the polymer material made part. Till the night, it shines out and guide the drivers for road safety. For further usage of warning purpose, LED solar road stud can also be combined with self-luminous function so that it provides drivers double safety guarantee. Product Code YF03 Product name YT yellow shell self-luminous rectangle reflector road studs with cat eye Material ABS+glass beads+Nano-fluorescent material Color white/ yellow/ red/ green/ black Size 130mmÃ?110mmÃ?15mm Weight 165g Application reflective panel, road stud, delineator, speed humb, etc, Feature light weight, lower cost-effecitve, high reflectivity, long-lasting, easy installation, wide range of application Payment terms T/T, L/C, Western union, Trade Assurance yf03_YF03 (1)YF03 (9)YF03(8)YF03 (7)YF03 (4)YF04 YF03 (3)_YF self-luminating series table of brightnessYetong road studplastic road stud_application Procedures and precautions for installation of road stud. 1.Environment: keep the ground clean, out of water and dust. The ground must be dry. 2.Drill hole on the ground: drill holes according to the distance of the two holes on the road stud. Then put the road stud on and make holes to holes match and clear the dust. If the spike is with anchor, then drill a hole 5mm deeper than the anchor to put it into the hole. And also need to put some glue into the hole. 3.Ratio of resin glue: make it 1:1 with the A and B type of resin glue. It will dry faster in summer than winter. 4.Apply glue: use a tool to take 5g glue and put it on the bottom of the road stud. Then put the road stud immediately on the ground. Finally install the screws. 5.Inspection: inspect whether the bottom is empty or not in case the glue comes out. 6.Time of solidification: it takes one day in winter and half day in summer.
YT self-luminous ABS plastic reflective road stud with reflective panels Product Code YF23 Product name YT self-luminous ABS plastic reflective road stud with reflective panels Material ABS+PMMA+Nano-fluorescent material Color white/ yellow/ red/ green/ black Size 100mmÃ?100mmÃ?20mm Weight 110g Application reflective panel, road stud, delineator, speed humb, etc, Feature light weight, lower cost-effecitve, high reflectivity, long-lasting, easy installation, wide range of application Payment terms T/T, L/C, Western union, Trade Assurance
Product Code YRG41 Product name China Supplier High Reflective Trapezoid Plastic 213 Glass Beads Reflector for truck Material ABS base+glass beads Color white/ yellow/ red/ green/ black Size 213 beads Weight 34g Application reflective panel, road stud, delineator, speed humb, etc, Feature high weight resistance, colorful, antioxidant, durable, 360° high reflectivity Payment terms T/T, L/C, Western union, Trade Assurance Sample One free sample but freight is paid by customers
Product Code YRG46 Product name Plastic solar square reflectors for road stud Material ABS base+PS/PMMA reflective panel Color white/ yellow/ red Size 95.4mmÃ?28.2mm Application reflective panel, road stud, delineator, speed humb, etc, Feature light weight, lower cost-effecitve, high reflectivity, long-lasting, easy installation, wide range of application Payment terms T/T, L/C, Western union, Trade Assurance
Product Code YRG47 Product name YT High Quality Truck Reflector Reflective Panel for Safe Material ABS base+PS/PMMA reflective panel Color white/ yellow/ red Size 87.2mmÃ?28.7mm Application reflective panel, road stud, delineator, speed humb, etc, Feature light weight, lower cost-effecitve, high reflectivity, long-lasting, easy installation, wide range of application Payment terms T/T, L/C, Western union, Trade Assurance
Product Code YRG34 Product name Rectangle roadway beads safety road Reflector for highway Material ABS base+glass beads Color white/ yellow/ red/ green/ black Size 120mmÃ?80mm,192 beads Weight 48g Application reflective panel, road stud, delineator, speed humb, etc, Feature high weight resistance, colorful, antioxidant, durable, 360° high reflectivity Payment terms T/T, L/C, Western union, Trade Assurance
Product Code YRG35 Product name China Supplier High Rectangle Reflective Panel Plastic with 366 Glass Beads Material ABS base+glass beads Color white/ yellow/ red/ green/ black Size 120mmÃ?80mm, 366 beads Weight 62g Application reflective panel, road stud, delineator, speed humb, etc, Feature high weight resistance, colorful, antioxidant, durable, 360° high reflectivity Payment terms T/T, L/C, Western union, Trade Assurance
Product Code YRG40 Product name China Supplier High Reflective Trapezoid Plastic 166 Glass Beads Reflector in Truck Material ABS base+glass beads Color white/ yellow/ red/ green/ black Size 166 beads Weight 27g Application reflective panel, road stud, delineator, speed humb, etc, Feature high weight resistance, colorful, antioxidant, durable, 360° high reflectivity Payment terms T/T, L/C, Western union, Trade Assurance Sample One free sample but freight is paid by customers
