Oil tempered spring steel wire, cold drawn steel wire, high carbon steel wire.
Hot-dip galvaning is a process in which the wire is dipped in zinc to create a zinc coating. Hot-dip galvanized steel wire has the advantages of corrosion resistance, good weather-resistance and long life, so it is widely used in many fields. The requirements for hot-dip galvanized steel wire are as follows: 1. Uniform galvanized layer: The galvanized layer of hot-dip galvanized steel wire should be uniform and dense, without defects such as uneven galvanizing, wrinkling, and falling off. 2. The thickness of the zinc layer is appropriate: the thickness of the zinc layer of the hot-dip galvanized steel wire should meet the standard requirements to ensure its corrosion resistance. 3. Good surface: The surface of hot-dip galvanized steel wire should be smooth, without obvious burrs and oxides. 4. Strong adhesion of galvanized layer: The galvanized layer of hot-dip galvanized steel wire should have good adhesion and not easy to peel off. 5. The chemical composition of galvanized steel wire is stable: the chemical composition of hot-dip galvanized steel wire should meet the relevant standards to ensure its quality stability. 6. The size of the galvanized steel wire is accurate: the diameter, strength and other dimensional parameters of the hot-dip galvanized steel wire should meet the standard requirements to ensure its performance. In short, the requirement of hot-dip galvanized steel wire is to ensure that its galvanized layer has good quality and stable performance, so as to improve its corrosion resistance and life.
Material: 45#- 75#,77B,Q235 etc Dia: 1.0mm-6.0mm Zinc coating :100g/m2 - 800g/m2 Grade A/ B /C�£?? Breaking strength:350mpa-2200mpa Steel wire (dia:1.0mm-7.0mm ) for ACSR,preformed line products and so on. Standard: ASTM B 498,ASTM A 411 AS 3863,BS 4565 ,JIS G 3548 ,EN 10264 we can offer high-quality products with good and smooth surface,no joints, uniform and continuous coating,free from imperfections not consistent with good commercial practice.The zinc coating can be up to 800g/m2 for 3.0meter. We can also provide galvanized wire to meet the specific requirements of our customers.
Material:45#- 75#,77B,Q235etc Dia: 1.0mm-6.0mm Constructions :1X3, 1X7 ,1X19,1X37 Zinc coating :100g/m2 - 800g/m2 Grade A/ B /C ? Breaking strength:350mpa-2200mpa YB/T 5004-2001, GB/T 3428-2002,CAN/CSA-G12,BS 183/BS443,BS EN 10244,ASTM A 475,ASTM A 363 Its widely used in domestic & abroad power, cable, telecommunication, broadcast and television industries. We can produce very heavy zinc thickness steel wire,for example 800 g/m2 for 3.00mm. Packaging Details: water-proof paper on drums or in coils Delivery Time: 20 days after confirmed order Payment Terms: L/C,T/T
Zn-5%Al-mischmetal alloy-coated steel wire (galfan / Bezinal ) Specifications Material: 45 75 ,77B,Q235 etc Dia: 1.0mm-6.0mm Aluminum content Grades Utilities, Common, Siemens-Martin, High Strength and Extra High Strength Finish Coatings Class A, B and C Specifications ASTM A925 -5 % Aluminum-Mischmetal Alloy-Coated Steel Overhead Ground Wire Strand ASTM A855 Zinc-5 % Aluminum-Mischmetal Alloy-Coated Steel Wire Strand Galfan a superior corrosive coating of 5% Aluminum and 95% Zinc.
Material: 45#-75#,77B,Q235 etc Dia: 1.0mm-6.0mm Zinc coating:100-800g/m2 We can offer high-quality products with good and smooth surface,no joints, uniform and continuous coating,free from imperfections not consistent with good commercial practice.The zinc coating can be up to 800g/m2 for 3.0meter. We can also provide galvanized wire to meet the specific requirements of our customers.
Galvanized steel wire factory, diameter:0.8-4.8mm, coil weight:50kg-800kg, coated thickness:15-35g.
Low relaxation high tensile strength pc strand is mainly used for concrete structure,such as railway and highway, overhead crane construction ,multi-floor industrial building floor and roof reinforcement for sports stadiums and etc,products are widely applied to the major domestic rail,road,and construction,The size including:9.53mm/12.7mm/15.24mm/9.3mm/12.5mm/15.7mm/17.8mm etc with tesile strength 1860Mpa low relaxation high tensile strength pc strand is mainly used for concrete structure,such as railway and highway, overhead crane construction ,multi-floor industrial building floor and roof reinforcement for sports stadiums and etc,products are widely applied to the major domestic rail,road,and construction,The size including:9.53mm/12.7mm/15.24mm/9.3mm/12.5mm/15.7mm/17.8mm etc with tesile strength 1860Mpa
PC steel strand, PC steel wire.
Material: SWRH82B Size: 1*7 wire 9.53mm, 12.7mm, 15.24mm, 15.7mm Grade: 1860MPa Relaxation Rate: 2.5% Elongation Rate: â?¥3.5% Standard: ASTM A416, BS5896-2012 Coil Dimension: Inner Diameter: 800m; Outer Diameter: 1400mm; Width: 750mm Coil Weight: 2.5-3.2MT/Coil Packing: Coils wrapped by 8 steel strips Fully wrapped with waterproof & P.P woven sheet Fixed with wooden pallet Strapped at 8 places with steel strips
Brand Name: QIANGBANG Alloy Or Not: Is Alloy Application: Manufacturing Copper Clad Steel Wire Standard: AISIASTMBSDINGBJIS Model Number: Special Use: Cold Heading Steel Place of Origin: China (Mainland) Wire Gauge: 4mm, 4.8mm, 5mm, 6mm, 7mm, 7.5mm, 8mm, 11mm, 11.5mm, 10mm,11mm Steel Grade: 77B/82B Packing: Roll Packing Tensile strength: 1370-2160MPA Usage: Construction Materilals Type: Drawn Wire Processing Service: Cutting Our Factory:Tianjin Qiangbang Industrial Co., LTD, which has dedicated in steel industry for almost 20 years. Our main products: steel strand, steel wire, steel and flat steel, with rigorous quality control, advanced equipment and skilled workers, we supply you with our high quality products and best service. This product is mainly used in vairousshapes of tensioning prestressed concrete structures,such as bridges of large-scale railroads and highways,frame of roofs,overhead crane beams,industrial and civil prefabricated concrete alabs,wall boards,tubular piles,PC water pipes,PC water pipes,TV towers and nuclear power stations,ect.There are two kinds of surface finishes:plain and ribbed.We can manufacture according to GB/T5223,ASTM,BS5896,JISG3536,ISO6934,EN101338 and the agreed standards..
My factory produces all kind of steel nails and galvanized wire, sincerely hope to establish the business with you. Our main products are common nails, roofing nails, duplex nails, concrete nails, lost head nails, electric galvanized wire, hot dipped galvanized wire, and black annealed wire. At the same time, because of the good location of our company, we also have many partners with exported products, like wire mesh, steel pipes, and nylon nets, so any products can be exported through our trading office too. Our company's aim is to provide high quality products with our best service. Any inquiry, please feel free to contact me
Specification of low carbon steel wire rod Diameter: 5.5-12mm Grade: sae1008(b), q195l, sae1010, sae1018, q235 Standard: gb, jis, bs Coil weight: about 2 tons each coil Place of origin: hebei, china (mainland) Brand name: jinjian Application: making nails, packing, fencing, construction usage Payment term: 30% tt, or 100% lc at sight. Packing details: rolled in coil, about two tons each coil. Delivery time: thirty days after deposit. Port of loading: tianjin port, china Type: in coil, coil weight about 2mt/coil Surface treatment: no trace, light and smooth
Specification of low carbon steel wire rod Diameter: 5.5-12mm Grade: sae1008(b), q195l, sae1010, sae1018, q235 Standard: gb, jis, bs Coil weight: about 2 tons each coil Place of origin: hebei, china (mainland) Brand name: jinjian Application: making nails, packing, fencing, construction usage Payment term: 30% tt, or 100% lc at sight. Packing details: rolled in coil, about two tons each coil. Delivery time: thirty days after deposit. Port of loading: tianjin port, china Type: in coil, coil weight about 2mt/coil Surface treatment: no trace, light and smooth
Prestressed concrete steel wire (pc wire) 1) type: plain surface, spiral ribbed, indented 2) size: 4.0mm, 4.8mm, 5.0mm, 6.0mm, 7.0mm, 8.0mm to 10.0mm 3) tensile strength: 1470 1770mpa 4) standard: gb/t5223 2014, bs5896 2012, astm/a421 16, etc. 1*7 wire prestressed concrete steel strand (pc strand) 1) size: 1*7 wire 9.3mm, 12.5mm, 9.53mm, 12.7mm, 15.24mm, 15.7mm high tensile, low relaxation 2) grade: 1860mpa 3) standard: astm a416, bs5896 2012, etc..
Pc steel wire.
Diameter of Automotive Steel Wire:0.6mm--2.0mm T/S of Automotive Steel Wire:1560Mpa~2160Mpa Raw Material of Automotive Steel Wire:45#50#55#60#65#82A Special Use:Cold Heading Steel
Size:1mm-90mm Aluminum Content:5% or 10% Carbon Content:0.42%-0.87% Packing:by coils, drums, Z2 Applilcation:for redrawing.
Diameter (mm) 2.0-3.2 Tensile Strength (Mpa) 950-1190 Zinc Coating (g/m2) 200-300 Packing Co
Pre-stress concrete steel wire, pre-stress concrete steel strand.
