Fusion splicer alk-88a (portable) fiber optic equipment is a mini type fusion splicing machine and have our own intellectual property right of fiber adjustment technology It adopts advanced pas fiber adjustment technology . Adopt four motors drive, have fiber adjustment function, it is not only used for fttx project, but also can be used for the trunk line, it is a machine which is the smallest volume , the lightest weight , the most fast splicing speed Features; Hardness¡êothe body is made from titanium alloy , and it has rubber protection function , quakeproof, waterproof, Usb port Keyboard position Protection rubber Interchangeable fiber holders ¡êofiber holders adopt interchangeable design. We can change different fiber holders for different fiber splicing: 1splice-on fast connector---3x2mm drop cable 2splice-on fast connector---pigtail fiber (2.0mm or 3.0mm) 33x2mm drop cable---3x2mm drop cable 43x2mm drop cable - pigtail fiber (2.0mm or 3.0mm) 50.25mm fiber---0.25mm fiber 60.9mm fiber---0.9mm fiber Packing :carton box25*30*40cm Ship: international express
Optic fiber communication.
PCM multiplexer, SDH multiplexer, fiber optic equipment, media converter, PDH multiplexer.
Soda ash light / dense 99.2% sodium bicarbonate caustic soda flakes 99% sodium sulphate anhydrous (ssa) 99% sodium sulphite flakes (ssf) 60% sodium metabisulphate hydrogen peroxide (h2o2) 50% formic acid 85% glacial acetic acid paraffin wax liquid paraffin (white oil) lp 100 menthol crystal fumed silica deg (di ethylene glycol) mono ethylene glycol (meg) poly ethylene glycol (peg), base oil 150n, bs 150, 600n bitumen 60/70 rpo (rubber process oil) lioh (lithium hydroxide) hco (hydrogenated castor oil) 12 hsa (hydroxy stearic acid) ferrous sulphate heptahydrate additive for lubricating oil aromatic chemicals.Exporting of chemicals & other products
Electronic, electric.Consultation
Electronic transformer, inductor, coil, choke, PCB, power supply.
Electronic ballast.
Drum motor.
Electric actuator and electric control valve.
Laser engraving and cutting machine, hardness tester, thickness gauge, flaw detector.
Material: Zinc Alloy, Size: 3/8",1/2", 3/4",1",1-1/2", 2", 3",4". Fit for liquid tight flexible conduit.
QT series of electrical units for partial rotation of valves are suitable for controlling butterfly valve, ball valve, plug valve, they can make such valves rotate at 90.The product has the following features: Small volume, light weight, high efficiency, high reliability, high protection property and low noises etc. The unit can be operated on site, and controlled in long distance. And it can be widely used in various industries, such as petroleum, chemical industry, power plant, water treatment, and paper making industry etc. The company has developed new intelligent actuator; selection function is increased on the basis of switch type actuator, which increased more selection space for users with different demands. Selection Function I: LCD display window and local operation function. Selection Function II: Self phase- -identifying and phase disconnection protection. Selection Function III: IR setting and control. Selection Function IV: Automatic regulation function.
SLM series is a new independent kind of multi-turn electric actuator. It applies to automatically control the gate valve, globe valve and so on which valve travel is beeline. It is widely used in such industries using pipeline as Petroleum, chemical industry, metallurgical industry, construction, municipal works, papermaking, fire power station and water power station etc. The basic model of series SLM products is outdoors model, with protection class IP65 ( if IP67 or IP68 is required, please put forward it). The design and the technical performances of SLM products accord with JB/T8528-1997 General terms of technical parameter of electric actuator for valve. Add electric controlling passive contacts, the capacitor for motor, the position feedback board, VOT , this improved the technical lever of the economic products , so that our customer can use products with excellent performance, fully function and reasonable price.
Technical parameter: Power source: Motor380V, 50HzControl line:220V,50Hz Working conditions: Ambient temperature:0-70 F Relative humidityâ?¤90% Protection classIP65 Working system10 min SLM product can provide different types: SLM Basic model SLM-L General local model ( with local controlling button model) SLM-LIC Local change-over model ( with local controlling button, local/remote control switch and indicating lamp) SLM-IN Integrated controlling model
SLP series electric actuator is a kind of new model of part-turn electric actuator products based on synthesizing the similar products. It applies to automatically control the butterfly valve, ball valve, and cock valve etc.90 degree turn valves. It can perform the local and remote operating for the industrial pipe and valves used in Petroleum, chemical industry, metallurgical industry, construction, municipal works, papermaking, fire power station and water power station etc. The basic model of series SLM products is outdoors model, with protection class IP65 .The products also can be manufactufactured to Ex-proof model,the Ex-proof class is Exd II BT4.9( if you have other requirement, please put forward it when ordering.) SLP series have the torque scope from 50 N.m to 16000N.m. The design and the technical performances of SLM products accord with JB/T8528-1997 General terms of technical parameter of electric actuator for valve. The Ex-proof performance accords with GB3836.1-2000 electrical apparatus explosive gas atmospheres-part I: general requirements and electrical apparatus explosive gas-atmospheres-Part 2 Flameproof enclosure d. And it has the certificate of quality by the Ex-proof examine organ
The PT-2D-J single-phase regulating module is a new-generation single-phase integral regulating electric actuator special control module developed on the basis of the PT-2C-J module introduced by our company. It receives DC 4 ~ 20mA standard current signal from DCS or other systems or PLC controllers, and controls the electric actuator to complete the proportional adjustment of the valve opening degree. The product set, proportional adjustment, isolation amplification, valve position transmission, power drive and many other functions, with over-torque protection, electronic interlock protection, forbidden delay protection, loss of confidence protection, temperature protection and other perfect protection functions. . It can also be equipped with on-site button board to implement on-site operation and provide various alarm output; add valve position liquid crystal display to accurately display the valve position opening degree; add infrared remote control to achieve higher protection level on-site operation. The product has the advantages of strong anti-interference ability, reliable performance, shock resistance, moisture resistance, small size, simple wiring and convenient debugging. It has been widely used in DKJ, DKZ, DZW, LQA, QB, QT, SD, SM, SMC, SR, 2SA, 802, 903, 3410, 3610 and other products.
IQ series of intelligent electric actuator is the high performance produce launched by gathering the world cutting- edge technology of TJFREYA R & D Center, and exclusively possesses the dual seal structure and non-invasive infrared remote control setting function. IQ series provide the complete valve drive scheme, and can adapt to all multi-turn, part-turn, and linear valves needing the control, and give the high standard performance, excellent quality and full services to the user. IQ actuator is the multi-turn electric actuator, which can be used for controlling and regulating valves. The on-off product is appropriate for the application With 60 times of startup per hour. The regulated product is appropriate for the application With 1,200 times of startup per hour. Moreover, the control is more accurate and the positioning is more precise, due to increasing the intelligent control unit. IQ has the specifications of water proof or water and explosion proof for selection. The output range of the direct torque is 35 Nm (25 lbf ft) - 3,000 Nm (2,200 lbf ft).
SD series hollow rotary actuators small actuator rotary actuator electric JD-AS-25/K/F is used in the structural design of composite structures, the generalization, standardization, seriation products in parts into consideration is more considerate, makes the product by machinery, motor, control circuit, combined to form a variety of different series and specifications, users in the use and maintenance of the greatly reduced the number of varieties of spare parts needed. The basic base of the product reducer adopts the high strength aluminum alloy, the mechanical structure design is concise and compact, the reliability is high, the volume is small, the weight is light;Multiple connections can be installed in any position and direction.
SD series 380VAC 50Hz AS25F30H electric actuator for valve is used in the structural design of composite structures, the generalization, standardization, seriation products in parts into consideration is more considerate, makes the product by machinery, motor, control circuit, combined to form a variety of different series and specifications, users in the use and maintenance of the greatly reduced the number of varieties of spare parts needed. The basic base of the product reducer adopts the high strength aluminum alloy, the mechanical structure design is concise and compact, the reliability is high, the volume is small, the weight is light;Multiple connections can be installed in any position and direction. Quarter-turn intelligent integration of 380VAC 50Hz AS25F30H electric actuator for valve can be used to control various valves with angle of 90°, Output Torque is 100-30000Nm.such as butterfly valve, ball valve, louver valve, damper, plug valve, baffle valve etc
Overview QT series Modulating type valves are suitable for controlling butterfly valve, ball valve, plug valve, they can make such valves rotate at 90. The company has developed new intelligent actuator; selection function is increased on the basis of switch type actuator, which increased more selection space for users with different demands. Working Environment and Main Technical Parameters --Optional power supply: AC 220 V AC 380 V. --Ambient temperature :-25 C~+70 C.--Protection level: IP 67. --Relative humidity:< 90% ( at 25 C). --Working time: Short time of 10 min. Main Features Selection Function I: LCD display window and local operation function. Selection Function II: Self phase-identifying and phase disconnection protection. Selection Function III: IR setting and control. Selection Function IV: Automatic regulation function.
