Network camera (ak, spark, superlite, lite, pro, and wifi), speed dome (pro), nvr (ak, spark, lite, pro, ai), cms (k1000, k2000) and project products (network camera, speed dome, nvr and vms).
Satellite meter, satellite signal meter, digital signal level meter.
Satellite finder, digital signal level meter, optical power meter, mini otdr, signal amplifier, optical receiver, optical transmitter.
Airport navigation and communication systems.
By using the method of Optical Domain Reflection technology, the SF-2010 Mini OTDR can meets the most demanding test requirements of optical fiber fault location. From the Power-On state, the SF-2010 provides the fastest and easiest solution on the market for determining the fiber length or fault location. Along with handheld and portable design, fully automated, one-button operation makes it the ideal mode for the users. This instrument widely used in application of fiber length measurement, fiber networks construction and maintenance, optical communication system, fiber CATV networks, security and surveillance systems, fiber cable project and so on. The SF-2010 is versatile, user-friendly instrument, maximum 5 fault events display, and auto-shutdown in 3 minutes, lower power alarm functions; SF-2010 is the most suitable fiber fault locator beyond other competitive products. Specification: 1.Connector Type FC/APC 2.Light Source FP laser diode 3.Wavelength 1550nm 4.Fiber Type G652 single mode 5.Precisioní+10m(Reflection point)ú¼í+200m(No reflection point) 6.Minimum dead zone20m 7.Max distance 30km 8.Resolution 0.001km 9.Display unit km. VFL: 1.Wavelength 650nm 2.Power Out 1mW 3.Connector Type Universal Connector. Battery: 1.Battery Type: 2 AA alkaline battery 2.Continuous operating time(@25íµ)>1000times or VFL continuous working 10hours 3.Auto power off 3min. Environmental: 1.Operating temp 0íµ to +40íµ 2.Storage temp -20íµ to +70íµ 3.Humidity 0 to 95úÑú¿no frozen. Physical: 1.Dimensions(mm): 157 x 86 x 40 2.Weight(kg): 0.25. Carton.
SF2011 ( Mini OTDR ) Optical Fiber Ranger By using the method of Optical Time Domain Reflection technology, the SF-2011 Mini OTDR can meets the most demanding test requirements of optical fiber fault location. From the Power-On state, the SF-2011 provides the fastest and easiest solution on the market for determining the fiber length or fault location. Along with handheld and portable design, fully automated, one-button operation makes it the ideal mode for the users. Features: 1,Portable, rugged, lightweight; Easy to use. 2,Built-in visual fault locator (VFL), conveniently to find the faults in dead zone. 3,Long battery life, up to 5000 measurements operation. 4,Automatic Pulse Width Control design to ensure a convenient operation. 5,Testing the distance of the fiber and identify the faults location in the fiber link. 6,Locates reflective and non-reflective breaks in the fiber network. 7,Support USB to transmit the data. Specification: Connector Type: FC/APC FC/PC Light Source: FP laser diode Wavelength:1550nm,1310nm Fiber Type: 9/125um single mode Precision:¡À10m(Reflection point),¡À200m(No reflection point) Minimum dead zone: 10m Max distance: 80km 50km Resolution: 0.001km Display unit: km VFL Wavelength: 650nm Power Out: 1mW Connector Type:Universal Connector Battery Battery Type: 2 AA alkaline battery Continuous operating time(@25¡ãC):>1000times or VFL continuous working 10hours Auto power off: 3min Environmental Operating temp: 0¡ãC to +40¡ãC Storage temp: -20¡ãC to +70¡ãC Humidity: 0 to 95%(no frozen) Physical Dimensions(mm): 157 x 86 x 40 Weight(kg): 0.25.
Description: SX503 Handheld Optical Power Meter is a self-developed test instrument Which is widely used for installation, operation and maintenance of fiber-optic network. It features smart appearance, backlight, auto-shutdown and widely dynamic range, good testing precision and universal optical connector for FC/SC/ST. Features: 1. High sensitivity, large dynamic range 2. universal connector interface: FC/SC/ST-LC/MU. 3. Quick response, without warm-up and reduce testing time 4. Low-voltage display function 5. Optional auto-shutdown feature 6. Automatic calibration function 7. The relative ratio test 8. Large LCD display and backlight Application: 1. Maintenance Telecom 2. Maintenance CATV 3. Test Lab of Fiber Optic 4. Optical fiber sensors Specifications: Type SX503A SX503B Wavelength(nm) 800~1650 Detector InGaAs Optical Connector FC SC ST/ Universal 2.5mm adaptor (LC,MU can be optional ) Measurement Range(dBm) -70~+10 -50~+26 Uncertainty ¡À5% Standard Wavelength(nm) 850,1300,1310,1490,1550,1625 Resolution(dB) 0.01 Power Supply 3pcs AAA 1.5V batteries working time(h) 120 hours Operating Temperature(¡ãC) -10~+50 Storage Temperature(¡ãC) -20~+70. Weight:160g.
Feature: 1. Satellite finder of king around the world 2. NIT function 3. Constellation diagram function 4. Display:3.5 inch high quality TFT LCD TV 5. Audio output:Built in speaker with volume control 6. New FAST Spectrum Analyzer 7. DiseqC switch 8 ways 8. Motor control diseqc 1.0/1.2/usals 9. Unicable standard-1.2.3.4 SCR0,1,2,3 10. All LNB types supported 11. Very sensitive new tuner 12. Calibrated meter to industry standards 13. Test:CBER,VBER,C/N Signal quality and strength 14. Pre-store the channel list from all over the world. Technical data: 1.Frequency range: 950MHz~2150MHz 2.Signal level range: -65dBm~-25dBm 3.Symbol rate:2Msps~45Msps 4.RF input connector: F type 5.Input resistance: 75ohm 6.22KHz Signal: 22KHzí+2KHz 7.Support DiseqC 8.Items of measurement :QPSK signal level, Bit error rate, carrier rate 9.Storage: 40 value of measurement, 80 configuration data,10 spectrum data 10.Support Constellation diagram 11.Mode of satellite finding: sound and colour 3.5¿òTFT 12.Displayed information:Satelliteí»s Azimuth,Elevation,Polarization 13.LNB power supply: Horizontal polarization:+18V,¿Q400mA Vertical polarization:+13V, ¿Q400mA 14.Total power: 8W 15.Working time: 3~4hours 16.Connector: Rs232 or USB(Optical) 17.Working temperature: 0~40íµ 18.Storage temperature: -20~70. Carton
Features: 1. 3.5 TFT color LCD display. 2. Monitor the video. 3. Analyze Digital channel (Power level, Constellation diagram, MER,BER and etc.). 4. Analyze Analog channel (LEVEL C/N and etc.). 5. Support all QAM modes (16QAM, 32QAM, 64QAM, 128QAM, 256QAM). 6. Support DVB-C/ITU-T J.83-Annex A/B/C. 7. Spectrum analysis. 8. Small, light, really portable. Specifications: A. Digital channels Measurement: Tuning range: from 5M~862MHz Tuning mode: by channels or by frequency Support: 16/32/64/128/256QAM Digital power: 40dBª¦V-110dBª¦V Accuracy: 2dB Bandwidth: Adjustable MER (modulation error ratio) measurement range: 19~40dB for 64QAM Accuracy: í+2dB BER (bit error rate) Measured before RS decoding: Measurement range: 1.0E-2 to 1.0E-8 Symbol rate: 1MS/S-7MS/S Modulations type: 16/32/64/128/256QAM DVB-C/ITU-TJ.83-AnnexA/B/C B. Analogue channels Measurement: Frequency/Channel: Tuning range: from 5M~862MHz Tuning mode: by channels or by frequency Channel range: China standard channel and append Channel International Channel: Download and add as needed Resolution: 10KHz Bandwidth: 280kHzí+50kHz Level measurement: Range: 25dBª¦Ví½120dBª¦V Accuracy: í+1.5 dB ( 0íµí½40íµ ) Resolution: 0.1dB Demodulate method: Peak value demodulate Input impedance: 75. Carton.
The Digital satellite finder is a professional, quality made instrument for setting and aligning a satellite dish to any satellite. According to parameters of the satellite, you can set and align a satellite dish very accurately, quickly and conveniently. Features as follows: 1. Graphic user interface, Designed to be very easy to use. 2. With Fast and easy menu structures. It can calculate Azimuth, Elevation and Polarization automatically according to local longitude and latitude and show these details on the colour LCD display. 3. It can communicate with your PC through the serial port and you can update new satellite parameters conveniently. 4. With A Large memory capacity you can pre-store 80 satellite!íÑsparameters and 40 measurement records. 5. With the high quality LCD screen you can watch the TV channel from the satellite you are testing. This is giving the ultimate verification that the satellite you are looking at is the correct one.
The Signal Analysis Meter is a full-featured handheld signal performance meter providing a complete signal test system in easy-to-carry protective case. Signal Analysis Meter allows choice of 4 pre-programmed user-selectable band plans accessed via keypad entry for easy measurement of broadcast, CATV, CATV/HRC, and SUB/VHF channels. Direct-entry channel or frequency tuning selections provide maximum flexibility in head-ends and distribution networks that employ narrow digital signals or non-standard frequency applications. The meter displays instantaneous digital signal levels when testing digital carrier levels. The large LCD screen displays signal level as a bar-graph with digital numeric readout. This backlit display provides screen illumination in dimly lit work-spaces, allowing behind rack and night meter operation. Signal Analysis Meter enables testing of carrier-to-noise, multiple channels, and full, reduced, and single band scan for complete testing flexibility. The meterí»s functions include not only signal measurement when AC/DC voltage is present under test, but, when selected, voltage-level display. Full-channel operation 5-870MHZ Frequency Range 4-keypad channel plans (TV, CATV/STD,CATV/HRC,SUB/VHF) enable quick switching between sources Single keypad frequency or channel selection provides compatibility with channel, data, and other narrow bandwidth carriers Full spectrum-analyzer scan provides display of up to 100 channels simultaneously Carrier-to-noise testing provides accurate testing of system performance anywhere in the head-end or distribution system Large easy-to-read backlit Graphic LCD display provides quick-glance signal reference even in dimly lit work environments AC/DC voltage readings and compatibility allow measurements through input connector, enabling signal and voltage measurements when voltage is present in tested signal without costly adapters 8-Hour rechargeable NiMH batteries provide cost savings Automatic power shut-off feature extends time between recharges Bright orange high impact plastic housing and soft leatherette-vinyl protective case with belt clip included 8 pieces in one carton
S8808 CATV Signal level meter is a measuring instrument especially designed for CATV technician. It is complete digital display with clear and correct reading and the using of microprocessor makes it has high capacity, more accurate and more flexible to operate. Meanwhile it has the character of small size, lightweight, and easy carrying, so it is more suitable to be used outside and fixing TV. Technical information (All the technical indexes below are under indoor temperature 25íµ) Frequency range: 48MHZ-870MHZ Frequency resolution ratio: 50KHZ Measured band width: 280KHZ Level Measurement Measurement range: 30dBuV-120dBuV Measurement accuracy:
The product, which newly researched and developed, is the integrative high-tech measuring instrument for the transformation of CATV .The main function is to measure QAM digital signal and analogue signal. The measurable item includes: power measurement , MER measurement , BER measurement , constellation ,channel measurement, tilt measurement, scan measurement, spectrum measurement, carrier noise ratio measurement, and rail voltage measurement. Make the corresponding choice according to the different occasion. The inside process chip adopts the extensive integrated microprocessor which is special to the most advanced tester in the world at present. It has many characteristics such as: the complete function, the fast processing speed, the low static power consumption, small and the high dependability. The peripheral circuit uses its special integrated package design according to corresponding function. The appearance adopts the human mechanics principle, it can be held firmly by single-hand and operated.
GPS RTK, gis data collector, laser land leveling equipment, auto steering system.
