D3 steel also knows as DIN 1.2080 and JIS SKD1, which is a 12% chrome alloy steel. JIS SKD1 steel has very high wear resistance against abrasive and adhesive wear due to the high volume of hard carbides in the steel matrix, medium toughness, dimensionally stable, high compressive strength, not secondary hardenable. D3 Steel Application 1.Highly stressed cutting 2.Punching tools for thin sheet 3.Blanking and forming dies 4.Forming rolls 5.Drawing and deep drawing tools 6.Slitting Knife 7.Stone processing tools 8.Pressure pads 9.Thermosetting plastic molding D3 Steel Round Bar Sheet Plate Heat Treatment Heat Treatment SKD1 steel requires hardening and tempering to achieve maximum properties. For maximum accuracy, the parts of SKD1 tool steel should be stress relieved after roughing operations. Stress should be relieved at 648 C (1200 F) for one hour and cooled slowly. Annealing Annealing of SKD1 steel needs to be done in a controlled atmosphere furnace. D3 steels should be heated thoroughly to 871 C (1600 F) and cooled slowly at a rate of not more than -6 C (20 F) per hour, until the furnace is black. Then the material should be removed and air cooled. Tempering The SKD1 steel should be cooled to room temperature and should be tempered immediately. The parts should be placed in the tempering furnace and increased slowly to the desired tempering temperature. Tempering for 1 hour per inch of thickness is required. Hardening SKD1 steel should be heated properly since it is very sensitive to overheating and if not heated maximum hardness cannot be achieved. The work should be directly placed in a furnace preheated to 954 C (1750 F) and soaked for 20-25 minutes, plus 5 minutes per inch of thickness, and then oil-quenched to harden it. Notice Other specifications are determined by daily stock. Customization is also acceptable. We are a professional special steel stockist and supplier with a high-quality stand for many years. Please contact us for any request of D3 tool steels materials. Songshun Steel always with you.
Heat Treatment DIN 1.2379 steels alloy should be preheated very slowly to 815 (1500 F) and the temperature can be increased to 1010oC (1850 F). Then held at 1010oC (1850 F) for 20 to 45 minutes and air-cooled (air quenched). Annealing Annealing of 1.2379 tool steels material should be done at 871 to 898 C (1600 to 1650 F) followed by slow furnace cooling at 4.4 C (40 F) per hour or less, after which cooling rate could be increased. At the same time, must do something to prevent excessive carburization or decarburization. Stress Relieving Heat it slowly to 1050 -1250 F, allow to equalize, and then cool in still air(Strain Relieving) Preheat Prior To Hardening Preheat slowly to 1350 -1450 F and hold at this temperature until steel 1.2379 steel material is uniformly heated. Hardening After thorough preheating, heat to 1800 -1850 F. Hold it at the hardening temperature until it is completely and uniformly heated. Quenching DIN 1.2379 steel tool material is an air hardening steel and will develop hardness on cooling in still air. To avoid scaling and prevent decarburization on the surface, controlled atmosphere or vacuum furnaces are recommended. Parts should be allowed to cool to 150F, or to where they can be held in the bare hand, and then temper immediately. Tempering The tempering temperature on material 1.2379 steel may be varied according to the desired hardness. 1.2379 steels can be tempered at 204 C (400 F) for achieving Rockwell C hardness of 61 and at 537 °C (1000 F) for a Rockwell C hardness of 54. Compare Chinese Cr12Mo1V1 steel, American D2 steel, Japanese SKD11 steel, the chemical composition of them is the same, but the performance is very different. After heat treatment, the color of Cr12Mo1V1 is a little orange-red, and the deformation would be large. It is easy to fracture during use. And the hardness of D2 steel is higher than SKD11 steel, but the toughness is not better than SKD11 steel. SKD11 steel is light and smooth, with the best overall performance. D2 Steel Forging Heating for forging of AISI D2 tool steel should be done slowly and uniformly. Soak through at 1850 -1950 F and reheat as often as necessary, stopping work when the temperature drops below 1700 F(926 C). After D2 mold steel forging, cool slowly in lime, mica, dry ashes or furnace. D2 steel should always be annealed after forging. Songshun specialized in Special Steel for almost 20 years. We can supply mold steel, high speed steel, alloy steel, free cutting steel and etc.Welcome your contact 24 hours a
D2 steel round bar and plate can be used to produce cold work mold with a large cross-section, complex shape, high impact force, and high wear resistance. It also is called DIN 1.2379 and JIS SKD11 steel. It is a high-carbon and high-chromium cold work mold steel. It is widely used in the world. It has high hardenability and the high-temperature oxidation resistance is good. The anti-corrosion ability is good after quenching and polishing, and the deformation is small after the steel heat treatment. D2 Steel Application 1.2379 steel is used for blanking or forming dies, thread rolling dies, shear knives, food-processing knives, gauges, punches and etc. AISI D2 Steel Round Bar Plate Sheet Supply We have our own cutting and processing equipment. Specifications can be cut and customized according to your requirements. We are a professional special steel stockist and supplier with a high-quality stand for many years. Please contact us for any request of D2/1.2379 steels materials. Songshun Steel always with you. Songshun specialized in Special Steel for almost 20 years. We can supply mold steel, high speed steel, alloy steel, free cutting steel and etc.Welcome your contact 24 hours a day!!!
Type : Steel Flat Bar Standard : STM, AISI, EN, DIN, JIS, GB Grate : A36, S235jr, St37-2, SS400, Q235, Q195 Technique : hot rolled, slitted, round edge Size ; Width Thickness Length : 10-200mm 1.5-30mm 6m, 9m, 12m or to order OEM : yes Tolerance : As the standard or your requirement Application : Construction/Shipbuilding/Machinery manufacturing/Steel structure Features 1. High quality Features 2.High dimensional accuracy 3. High utilization rate of material 4. Saving cost price Packing Details 1. Iron sheet in both ends 2.All wrapped packing with plastic woven bag 3.Loose package 4.As the requirement of customer.
Product Name Stainless Steel Flat Bar / Rod Material 201/202/304/304L/316/316L/321/410/420/430/440C/S31803/S38815/S30601etc. Specifications Round bar Diameter: 3mm~800mm Angle bar Size: 3mm*20mm*20mm~12mm*100mm*100mm Square bar Size: 4mm*4mm~100mm*100mm Flat bar Thickness: 2mm~100mm ; Width: 10mm~500mm Hexagonal bar Size: 2mm~100mm or as per customerâ??s request. Technique cold rolled & hot rolled & COLD Drawn, Polish Surface acid pickling/Mirror polish/Color coating/Brushed/Common polishing Standard ASTM AISI EN DIN GB Packing Standard export packaging or as per customerâ's request
Product Name Stainless steel hexagonal steel Material 201ã??202ã??301ã??302ã??303ã??304ã??304lã??316ã??316lã??321ã??309sã??310sã??317lã??321ã??347ã??904l etc Type Round,square,hexagonal,flat,angle Surface Pickled,Black,Bright,Polishing,Blasting,etc Round bar 3mm~800mm Angle bar 3mm*20mm*20mm~12mm*100mm*100mm Square bar 4mm*4mm~100mm*100mm Flat bar Thickness: 2mm~100mm,Width: 10mm~500mm Hexagonal 2mm~100mm Length 6m,5.8m,12m or as required Application chemical industry, shipping industry, manufacturing industry, construction,decorate Industry, electric power, pump shafts,sanitary wares ,furniture handles,boiler, high temperature resistant,low temperatureresistant, corrosion resistant. Tips The sizes or thicknesses of stainless steel bars can be customized, if you need additional information, please donâ??t hesitate to contact us at any time.
Product Name Stainless Steel Bar Material 200 Series 300Series 400Series Type Round,square,hexagonal,flat,angle Surface Pickled,Black,Bright,Polishing,Blasting,etc Round bar 3mm~800mm Angle bar 3mm*20mm*20mm~12mm*100mm*100mm Square bar 4mm*4mm~100mm*100mm Flat bar Thickness: 2mm~100mm,Width: 10mm~500mm Hexagonal 2mm~100mm Length 6m,5.8m,12m or as required Application chemical industry, shipping industry, manufacturing industry, construction,decorate Industry, electric power, pump shafts,sanitary wares ,furniture handles,boiler, high temperature resistant,low temperatureresistant, corrosion resistant. Tips The sizes or thicknesses of stainless steel bars can be customized, if you need additional information, please don�¢??t hesitate to contact us at any time.
Product name Angle bar Thickness 3~24mm or customer's requirements Width 20~200mm or customer's requirements Length 6~6.1 Meters or as customer's requirements Standard ASTM A53/ASTM A573/ASTM A283 GB/T706-2008, GB/T706-2016 DIN17100-80, JISG3192-94 Material Q195,Q215,Q235B,Q345B,S235JR/S355JR/SS400 Finished Black/Galvanized/Coated/Oiled/Painting,etc. Usage Widely used in various building structures and engineering structures, such as building beam, bridge, power transmission tower, lifiting and transporting machinery, ships, industrial furnaces, reaction towers, container racks and warehouse.
Grade:ASTM 303,304/L,316/L,321,316Ti, 310S,309S, 201,202,205,204+Cu,410,420,430,446 and Other as per customer's requirement Size: dia1-500mm Finish: cold drawn,peeled, bright finish Package: plastic and woven pack or wooden box Payment: TT30% down payment the balance before carrying Mill test Certificate supplied
Type: Stainless Steel Bars Standard: ASTM, AISI, GB, JIS, DIN, EN Certification: ISO, RoHS, IBR, AISI, ASTM, GB, EN, DIN, JIS Shape: Round Technique: Cold Rolled Surface Treatment: Polished
Type: Stainless Steel Bars Standard: ASTM, AISI, GB, JIS, DIN, EN Certification: ISO, RoHS, IBR, AISI, ASTM, GB, EN, DIN, JIS Shape: Round Technique: Cold Rolled Surface Treatment: Polished
Stainless Steel Round Bar Manufacturer, Stainless Steel Round Bar Supplier, Stainless Steel Round Bars, Stainless Steel Round Bar Manufacturer in China, Stainless Steel Round Bars Supplier, Stainless Steel Round Bars Manufacturer, ss Stainless Steel Round Bar, ss 316 Stainless Steel Round Bar, 304 Stainless Steel Round Bar Xinnorda steel supply is a professional stainless steel round bar manufacturer in China, providing very corrosion resistant stainless steel round bars. Stainless steel round bars are bars made of stainless steel alloys and other alloys such as chromium. Under the guidance of skilled professionals, the products are carefully manufactured using top quality raw materials. On the other hand, the company uses top-notch tools and an experienced workforce to showcase the standard products across the globe. Xinnuoda Steel Supply offers round bars made of carbon and low-alloy steel in a wide range of sizes for construction and machinery manufacturing. stainless steel round bars are used in construction for various steel structures, handrails and guards, as well as in the manufacture of reinforced concrete products, used as strengthening elements. The machine building industry uses steel rounds as raw material for the manufacture of rolls, bushings, axles, pinions, components for equipment and vehicles, metal products, etc. Large cross-sectional steel rounds are used to manufacture semi-finished products in the form of tubes. Stainless steel round bar is available in a wide range of shapes and sizes according to the specific needs of the customer. This is known for its outstanding properties and attributes that make it worthy and admired by various industrial applications. Features - High strength - High corrosion resistance - Highly durable and versatile - Enhanced toughness - Can withstand high temperature environments - Long-term survival service Stainless steel round bar is well tested and inspected under the guidance of professionals who check product quality standards and work strength. Testing - Hardness test - Tensile strength - Toughness test - Corrosion resistance test - Chemical analysis - Mechanical testing - Durability test After all inspection and testing procedures, the products are packed in high quality packaging material to prevent rust and damage during transportation. This packaging is - Wooden pallets - Wooden box - Wooden crates or according to customer's choice To procure stainless steel round bar, get it from Xinnuoda Steel Supply. These offer you the best quality products at reasonable and reliable prices.
Material:304/304L/316/316L/2205/2507/310S/253MA Technique:Cold Rolled Hot Rolled Surface:BA/2B/NO.1/NO.3/NO.4/8K/HL/2D/1D Length:Customers' Requirements Keyword:Ss Round Bar MOQ:1Ton Payment Term:30%TT Advance + 70% Balance Dimensions:5.5mm-500mm Packing:Standard Seaworthy Package PRICE TERM:CIF CFR FOB Ex-Work Certification:ISO
Material: 304/304L/316/316L/2205/2507/310S/253MA Technique: Cold Rolled Hot Rolled Surface: BA/2B/NO.1/NO.3/NO.4/8K/HL/2D/1D Length: Customers' Requirements Keyword: Ss Round Bar MOQ:1Ton Payment Term: 30%TT Advance + 70% Balance Dimensions: 5.5mm-500mm Packing Standard Seaworthy Package PRICE TERM CIF CFR FOB Ex-Work Certification
1.3817 stainless steel round bar Surface: Peeled. Mechanical property: Tensile strength : 800-1050MPA, Yield strength: min 490 MPA, Elongation: min 35%, Impact : min 75 J. UT test to SEP 1921 D/d. Size: 10-300mm Hot rolled & hot forged. Payment: T/T or L/C
Provide High Purity Molybdenum Plate Moly Steel Making Bars Size 12 - 14mm Length 300mm Molybdenum Steel Making bars are made of by material with high melting point, corrosion resistance, high density, good thermal conductivity and electrical conductivity. Molybdenum bar is resistant to corrosion when the humidity is below 60%. However, it must be protected at elevated temperatures. Tungsten can oxidize in the presence of oxidizing gases at temperatures above 250�° C. Despite this vulnerability, Molten glass, nitrogen, inert gases, molten metals and ceramic oxides only slightly affect it. Moly bar has high melting point so it's suitable for very high-temperature applications. It is also characterized by a uniquely low coefficient of thermal expansion and a very high level of dimensional stability. Molybdenum bars are manufactured as random length pieces or cut to customers' desired lengths. In addition, there are three different surface processes or finishes which are provided, depending on the desired end use of the molybdenum rod. Molybdenum Bars Introduction: Purity: Mo 99.95% Appearance: Silver gray metal luster This product is made with FMo-1 The impurity content accords with GB3462-82 standard Molybdenum products have the properties of high melting point, good thermal conductivity and low thermal expansion. At high temperature, they can resist oxidation and have high strength without any distortion during the procession, etc.
We provide 99.95% Moly Rod / Molybdenum Round Bar diameter 1 - 100mm For Sapphire Industry Molybdenum ruond bar is resistant to corrosion when the humidity is below 60%. Molybdenum round bar is made of by high quality molybdenum raw material with high melting point, corrosion resistance, high density, good thermal conductivity and electrical conductivity. However, it must be protected at elevated temperatures. Molybdenum can oxidize in the presence of oxidizing gases at temperatures above 250�° C. Despite this vulnerability, Molten glass, nitrogen, inert gases, molten metals and ceramic oxides only slightly affect it. Moly bars have high melting point so it's suitable for very high-temperature applications. It is also characterized by a uniquely low coefficient of thermal expansion and a very high level of dimensional stability. Molybdenum Round Bar: Purity: Mo 99.95% Appearance: Silver gray metal luster This product is made with Mo-1 The impurity content accords with GB3462-82 standard Molybdenum products have the properties of high melting point, good thermal conductivity and low thermal expansion. At high temperature, they can resist oxidation and have high strength without any distortion during the procession, etc.
provide CUW70 CUW75 Copper Tungsten Rods CUW80 CUW85 Copper Tungsten Round Bars,Copper Wolfram Rods . Application:EDM Welding
Mild steel triangle steel bar,mild steel trapezoid steel bar,mild steel speical shape steel bar Mild steel is carbon steel with a carbon content of less than 0.25 percent. It is called mild steel because of its low strength and hardness.It includes most ordinary carbon structural steels and some high quality carbon structural steels, most of which are used for engineering structural parts without heat treatment, some are used for mechanical parts requiring wear resistance through carburizing and other heat treatment our factory focus on small batch, special shape section steel bar, such as triangle, trapezoid, type L,pipeline guide, textile machinery pawl, can now produce nearly a hundred kinds of steel bars, a variety of special-shaped materials, high precision materials have been well received by users.Other products can control the molding accuracy within 0.05mm according to the drawing we have Cold drawn trapezoid steel;Cold drawn Angle steel;Shaped cold-drawn steel;Cold drawn round steel;3-50 mm;Boiler discharge pin;Cold drawn hexagonal steel;Solid Angle steel;Supporting roller;Cold drawn flat steel;Cold drawn steel;Square pin, flat key;Alien: processed according to the drawing
Sichuan Liaofu Special Steel Industry Co., Ltd has been in steel area for more than ten years,focus on producing 4140 42crmo4 4130 4135 scm440 25crmo4 1010 1020 1045 seamless steel tube,the branch office started in jiangushu on the business of steel pipes we strictly carry out the quality system iso9001:2000 standard during production process, adopts advanced modern production management and quality management, to obtain high quality steel pipe . After acid pickling, cold rolling, cold drawn, and then adopt advanced technology for high temperature heat treatment (NBK status) to produce steel pipes with surface: bright, smooth, high precision, high polish, both inside and outside wall without oxidation layer, internal and external wall of high precision, mechanical performance fits well in any Angle bending, and can bear high pressure, cold bending deformation, flaring, flattening, tensile and other require ments, our steel tube doesnot burst when cold bending, no cracks, no oxide layer and the internal and external wall, etc. The precision steel tube is made by seamless steel tube ,which is through non-oxygen tempering treatment to eliminate the surface and internal stress.The product is of high precision and ductility, easy to be processed into various required shapes, and cross section of the tube will not be reduced or flattened.The surfaceis of high presicion, and the surface hardness is moderate and easy to be connected. The inner hole and surface are treated with phosphating anti-rust treatment without acid cleaning and rust removal. The company covers an area of more than 8000 square meters with an annual output of more than 5,000 tons.The main products are: cold drawing or cold rolling precision seamless steel pipe and related supporting bright tubing, conveying fluid seamless steel pipe.Our company produce seamless steel pipe in Europe (Germany) DIN series standard is the basic standard, using high quality tube blank, on the basis of this combined with our unique steel pipe manufacturing process,.Steel pipe is produced in high precision and high cold drawn.Because of the special bright heat treatment process, the inner and outer walls of steel tube are not oxidized after heat treatment. best sae 4140 steel tube 1.7225 machined tube, 4140 Hexagon Cold drawn Shaped Steel Tube 4140 Steel Roller,we can produce Machined Part according to drawings Standards:ASTM,JIS,GB,EN(DIN,BS,NF) Or Per as clients requires.
