High frequency vacuum dryer is smaller type fast dryer, suitable for hard or thick wood drying, it is a best choice for hard wood furniture company. High frequency dryer applies both high frequency and vacuum condition. 1.Character: High frequency heating: high frequency power acts only on the moisture of the wood, it penetrates the wood and where there is water or moisture, there is high frequency power. So it dries: fast and uniform Vacuum condition: At vacuum condition, the water is vapor at very low temperature, so this eliminate the problem of sparking or splitting problem for hard wood, especially for the type of extremely hard wood that likely to spark if drying temperature is too high. Further more , vacuum condition create a minus pressure in the tank, this minus pressure suck the water or moisture out of the wood fast 2 sagas high frequency dryer is plc automatically controlled , high frequency and vacuum pump is start and puse automatically during drying, water come out of the wood is automatically released by water control system to a water holding tank. Weight calculating system get the data of weight change of the wood, by this, the moisture content with-in the wood is readable. Very precise fiber glass(optical fiber) temperature sensor make sure the wood drying at right temperature to eliminate any chance of split or spark on the wood. Plastic and foam, seaworthy package Dimensions of tank: 1300mm Gross weight:9400kgs
Main Features 1) PLC automatical control with touch screen interface. Fault self-check system. 2) Machine passed REGULATIONS FOR ELECTROMAGNETIC RADIATION PROTECTION. Safe for operators. 3) High frequency dielectric heating. Drying wood more than ten times faster and more unfirmly than traditional kiln. 4) Vacuum minus pressure drying. Much safter for wood. There is no wood crack, color change problems. 5) With hydraulic system and press. During the drying process, hydraulic system will give pressure on wood. After drying, wood will not bend. 6) Integrated design of cooling system. Save floor area and more humanized. 7) Humanized and safe design on tank door and feeding cart.It doesn't need additional rail outside and easy to load wood, open and close tank door. 8) Advanced temperature inspection system. Test the wood temperature correctly and will not disturbed by High frequency. 9) Advanced Wood weight measurement system. It can test the wood weight at any time. Then can show the wood moisture at present. 10) Worm and bacteria killing. 11) Does not need boiler. No polution.
Details Suitable for: melamine board, mdf, laminate board, plywood Teeth type: more teeth, atb 15, hook angle, ba5(lrlrf) Cutting materials: laminate board, melamine board, plywood Features: nail resistant, longer lifetime
Details Suitable for: bi-laminated board, chipboard, mdf, melamine board, especially for melamine board cutting , results good effect and long life time. Machine: horizontal panel saw. Teeth type: positive hook angle, tcg, atb. Cutting materials: chipboard, melamine board.
Details Suitable for: cutting special aluminum extruded profiles. Machine: equipment with machinery fastened miter saw. Teeth type: 5, positive hook angle design, tcg Cutting materials: aluminum profile , and non-ferrous metal. Features: reduce cutting thickness, excellent cutting effect, results no burr, optimize low power operation performance.
Details : Suitable for: solid wood longitudinal cutting and crosscutting, perfect cutting without collapse, sharp and high wear-resistant.positive hook angle design. Cutting materials: suitable for soft wood and hard wood. Hook angle can be designed according to cutting materials of the wood.
Application: cutting bi-laminated board, mdf with the scoring saw blade Features: 1. Tungsten carbiade tip from ceratizit, luxemburg 2. 75cr1 from germany 3. Longer lifetime Machines: circular saws and horizontal panel sizing machines Teeth type: positive hook angle, tcg Cutting materials: bi-laminated board
Details 1. Body material: imported 75cr1 , 42hrc , laser cutting processing technology 2. Carbide material: ceratizit, 93.2hrc, carbide size: 24x4.5mm 3. Adopt overseas advanced automatic gear grinding machine 4. Features: outer diameter 210mm, tip width 0.75mm, hook angle 19, top angle 20, side angle 5, eccentricity 38.5mm 5. Application: high speed equipment 6. Suitable for: laminated timbers and furniture wood. E.G. Rubber, bamboo and other imported timber.
Details 1. Body material: imported 75cr1, 42hrc, laser cutting processing technology 2. Carbide material: ceratizit, 93.2hrc , carbide size: 24x4.5mm 3. Adopt overseas advanced automatic gear grinding machine 4. Features: outer diameter 210mm, tip width 0.7mm, hook angle 21, top angle 20, side angle 6, eccentricity 37mm 5. Application: high speed equipment 6. Suitable for: laminated timbers and furniture wood. E.G. Rubber wood, bamboo and other imported timber.
Hf type solid wood bent chair press machine applies high frequency generator to hydraulic press by mold and electrode, it transfers high frequency power to work pieces to achieve the function of fast gluing and forming. Hf plywood hot press machine is suitable for 1.Bent plywood chair. 2.Bent or arc plywood for furniture or bed. 3.Other plywood products, like cloth hangers, or surface of musical instrument, etc. Feature 1.Fast and uniform heating of high frequency generator. 2.Bending shape is stable, not easy to change lamination. 3.High frequency power is selectively heating power, it concentrates only water or glue in wood, not consume high frequency power, more effective and saving power. 4.Wooden or mdf mould used, much economic than metal mould if shape is changed a lot.
High frequency heating lumber kiln for drying wood are many times faster than traditional kiln dryers. The drying process can range from several hours for thiner, softer woods to several days for thicker, harder woods. Hfvd120-sa features an automatic feeder with a quick, automated drying cycle. It has a 50kw high frequency generator, 6 t hydraulic pressure and 13 m3 capacity. It is an ideal dryer for thick hard wood typically used in the furniture and flooring industry. All models include high-tech programmable logic controllers. The plc comes with common hardwood presets ready for use. The plc automates the drying process by starting the hydraulic pump, hf generator, vacuum pump and water system. The water control system pulls the moisture to an external water tank which can then be drained. The weight system calculates change data to read the moisture content of the wood. Our engineers can provide overseas installtion, training and are available to provide after-sell service and maintenance. We recommend proper training for sfe and prolonged use of the machinery. Feature Fast drying cycle Automatic feeder Large capacity Plc automated systems with touch screen panel Uniform heating No sparking or bending problem Veneer, panels, softwood and hardwood planks, heavy timber with large dimension Patented weighing system, stainless steel cooling system Schneider, omron, siemens etc european spare parts
High frequency wood board joining machine from saga factory combines high frequency dielectric heating with 2 directions pressure, is suitable for finger joint or edge glued board jointing or gluing the rim of solid door or other wood block gluing. Main features: 1.Plc automatic control with auto feeding cart. 2.Electro components mostly use european brand, like schneider, siemens, omron to enable stable working. 3.Strict control and regulation on mechanical spare parts like hydraulic, other parts all use internation standard. Application case Standard working size is 1220*2440mm, gluing thickness is 8100mm, 67mm hard wood board can be made. 3000mm, 35000mm, 4000mm, 4880mm, 5000mm and 6000mm is optial, can be customized as customer's requirement. Heating time for standard size wood board is 23 mninutes. Wood requirements Timber species: softwood and hardwood Timber moisture: 812% Timber processed qualities require: planed on four sides +-0.05mm
A sculpture moulded with paper on plywood, then painted on to describe the life of an african fisherman
Thickness 2.7mm¡a37mm Thickness tolerance ¡¨¹6mm ¡¨¤0.2mm to ¡¨¤0.3mm, 6mm¡a37mm ¡¨¤0.4mm to ¡¨¤0.5mm Core Poplar, hardwood , combi or as agreed. Face/back Okoume, keruing, pine, oak, birch , agathis, bleached poplar, brown etc Glue Mr, wbp(e0, e1, e2). Moisture To be 8%-12% at time of shipment. Usage Decoration, furniture, package Package Inter packing: 0.20mm plastic bag. Outer packing: pallets are covered with plywood or carton and then steel for strength. Conveyance 20¡¡¥gp 65-70sheets/pallet for 18mm 8pallets/ 22m3 40¡¡¥gp 16pallets/ 56m3 40¡¡¥hq 19pallets/66.5m3 Delivery time Within 30 days on receipt of t/t deposit. Min order 1x20ft , 1x40¡¡¥fcl, 1x40hq Price terms Fob, cfr, cif Density 450-800kg each cubic Payment terms 30% in advance as production deposit, balance against b/l copy fax. Supply ability 180000 sheets/month Hs code 4411141100 Net weight :25kgs
Vermiculite dampproof board
Characteristics: lightweight, fireproof, heat/sound insulation, heat retaining, damp proofing, moisture absorbing, environmental-friendly. Fields of application: fireproof doors, fireplace, furnace, boiler chimney, stove, electric heater, partition panel, ceiling, furniture, furnishing, platform for marine and vessel etc. Product description: Process temperature: 1100degrees centigrade Bending strength: 0.574 - 2.30MPa Density: 200kg/M3 - 1100kg/M3 Compression strength: 0.690~2.90MPa Thermal conductivity: Max. 0.020W/mK at 600 degrees centigrade Max.0.0128W/mK at 34.51 degrees centigrade The minimum thickness: 3mm The maximum thickness: 80mm The maximum width: 1220mm The maximum length: 2440mm
Fireproof, heat/sound insulation, environmenatal-friendly Characteristics: fireproof, heat/sound insulation, heat retaining, damp proofing, moisture absorbing, lightweight, environmental-friendly. Fields of application: fireplace, furnace, boiler chimney, stove, electric heater, partition panel, fireproof doors, ceiling, furniture, furnishing, platform for marine and vessel etc. Product description: Process temperature: >1100degrees centigrade Bending strength: 0.574 - 2.30mpa Density: 300kg/m3 - 1100kg/m3 Compression strength: 0.690~2.90mpa Thermal conductivity: max. 0.020w/mk at 600 degrees centigrade Max.0.0128w/mk at 34.51 degrees centigrade The minimum thickness: 3mm The maximum thickness: 80mm The maximum width: 900mm The maximum length: 2100mm
