Find Verified Metal Working Machinery Suppliers, Manufacturers and Wholesalers

Main technical parameters:
Standard width: 1300 mm
Wire diameter range: 0.05-0.45mm
Weaving density: plain weave square hole15-260 mesh; twill weave up to 400mesh
Speed: 120 (140 optional) RPM
(the actual speed depends on the weaving width and detailed specifications), Step-less speed regulation of frequency converter
Heald frame and form: Tappet arch heald(three type available -Tappet arch heald, rotating electronic dobby and servo dobby). And 2-20 pieces of aluminum alloy heald frame (optional).
CNC: Precise and fast one way linear weft leading is controlled by high performance servo motor under PLC control. Adopt Numerical control let -off (feeding warp wire ) by AC servo motor, real time display tensions data also automatic adjustment. AC servo motor CNC coiling
Basic tension 20000N/M
Weight 45000kg
Outline size 2750mmX3300mmX1500mm

Metal frame, is a steel and wood, construction materials earthquake fire. Metal frame of high quality cold-rolled galvanized steel coil as raw material, rolling through a kind of decorative material, which material uniformity, high strength, steel degree of good corrosion resistance. Done in conjunction with gypsum board walls, suspended ceiling with the best materials.

Name: HF50
Main and metal frame production line program
1. Rolling sheet metal thickness: = 1.2 mm.

Second, the production line is mainly composed by:
1. Uncoiled - 2 sets
2. Forming the host - 2 sets
3. Hydraulic cutting system - 2 sets
4.4 sets of care rack
5.2 sets of control systems.

Third, the production line is mainly composed of structural description:
1. Uncoiler: Single-support machine, manual open-book, screw concentric swelling structure.
1) maximum load: 3t.
2) the mandrel base diameter: set by the user.

2. Incision and cut off the hydraulic system: This machine is driven shear cylinder mold to achieve the effect of incision and cut off. All hydraulic components are produced by famous manufacturers.
1) die cut material: gcr12.
2) hardness: hrc58 ~ 60.
3) hydraulic motor power: 3kw.

3. Forming host
1) forming speed: 6 ~ 8 m / min.

2) Forming pass: main keel 16 times. Vice keel 12.

3) frame: adopt the national standard I-beam welded together.
A) name: hot-rolled I-beam.
B) specification: 28 #.
C) standard: gb/t706-1988.

4) spindle:
A) material: high quality 45 # steel.
B) shaft diameter: |46mm.
C) heat treatment: hb235 ~ 280.
D) processing technology: rough heat treatment finishing.

5) Forming roll:
A) material: gr15 (bearing steel).
B) hardness: hrc 60 ~ 62.
C) processing technology: rough heat treatment finishing.

To process with this machine it is not necessary to beat flat the bevel edge, and it can realize at-one-time moulding. Having been heated, the material end can be rolled to have distinct fishtail veining of scalloping shape. The rolled material end becomes wider and thinner with the end thickness not more than 2mm, which being called as "fishtail" belongs to advanced process before metal pattern bending. The machine can process maximum products: 16mmí-16mm square steel, 16mm round steel, 50mmí-8mm flat iron. By the machine we can roll not only coarse fishtail but also thin fishtail.

The machine is the second generation of AB-C1 General Electric Pipe Bender. Compared with the first generation AB-C1 bender, the space length of the two driving shafts of the machine is adjustable, thereafter we can bend various diameter parts: round tube, square tube, rectangular tube, as well as large and small diameter arc and round products. Owing to the adjustable transverse distance of the two shafts, it can process thick and large tube easily. In operation we can get arc and round parts with different diameters by controlling the press-down sizes of the driven roller. The machine has large processing ability, and can be used extensively and laborsaving.

There are 9 kinds of dies as the machine attachments, including 8 sets of square tube dies: 15,15mm, 20,20mm, 25,25mm, 30,30mm, 40,40mm, 50,50mm, 60,60mm, 70,70mm,above dies can be used to bend rectangular pipes, as well as 1 set of straight flat iron bending dies. In addition, there are 9 sets of round tube dies for selection: 16mm, 19mm, 22mm, 24mm, 30mm, 36mm, 50mm, 63mm, and 76mm.

This machine is the preparative machine for rebar connection in construction work. Its main function is to forge the end part of rebar to raise the rebar area and therefore enlarge the strength of rebar end.

Parameter:
Upset forging machine:
Mode: BDC-Auto 1
Suitable rebar size: 16-40mm
Voltage: 380V/3Phase/50Hz
Nom. upset force: 2000kN
Dimensions: 1300*680*1400mm
Weight:850kg
Hydraulic pump:
Mode: XB6.3/80
Nom. oil pressure: 80-90Mpa
Nom. flow: 10L/min
Power of main motor: 7.5KW
Dimensions: 800*550*900mm
Weight: 150kg

PARAMETER:
1. Range of application: Ï?16-Ï?40
2. Threading speed: 32r/min
3. Back off speed: 64r/min 
4. Pitch size: 4 sizes 
5. Electric motor power: 2.4 KW /3
6. Rolling (cut) head moving distance: 150mm 
7. Out dimension: 1325*570*1070mm

Principle: