Find Verified Fiberglass Suppliers, Manufacturers and Wholesalers

we can product 45g-180g fiber glass mesh,for width we can product 5cm-120cm.
For length we can do as customer request.from 10m -1000m.
We have been exporting for ten years, exporting 500-700 containers to foreign countries every year. If you need the price or have any questions, please contact me

Dear friend

Have a good day.

This is Jack from China and we are the professional manufacturer of Fiberglass Mosquito Screen.

Pls kindly check more details as following

Weight: 80-120gsm
Mesh:18x16 mesh, 18x14 mesh, 16x16 mesh, 16x14 mesh, 14x14 mesh and so on
Color: Black,gray,green or as your requirement
Package: per roll with plastic bag,6 rolls with one carton or as your requirement.
Quantity:20' Container Could load 80000 Square Meters

And we would like to send you samples to test the quality.

Could you contact me and talk much more details?

Look forward to hear from you soon.

Jack (Sales Manager)

Tel: +86 13102881321
Whatsapp: +86 13102881321 / Wechat: a799033225
Email: sales15@wiremeshofchina.com

Dear friend

Have a good day.

This is Jack from China and we are the professional manufacturer of fiberglass mosquito screen.

1. This is our product catalogue on the attachment, please check it

2. Pls kindly check more details as following
Fiberglass Mosquito Screen
Weight: 80-120gsm
Color: Black,gray,green or as your requirement
Price:$0.25-1/M2 Fob Xingang Port
20' Container Could load 80000 Square Meters

3. We would like send you samples to test quality.
Would you like contact me and talk much more details ?

Look forward to hear from you soon

Best regards

Fibreglass duct rod/duct rodder/ fiberglass conduit rod description:
Fiberglass duct rod applies in tow lead-rope through a pipe, it is auxiliary means. Surface smooth and high resilience, so the frp perforator with ease passes the narrow channel. Perforator consists of two parts: the glass fiber strengthen the level, the high-pressured low density polyethylene protective layer(smooth, firm , can resist the adverse circumstance). It has time-savingreducing effort, improving efficiency, etc, and can be used for telecom cables, cable pipe and cleaning and plastic pipe of cloths to put.When use draws out the fpr pole by the pulley, then with a corresponding metal joint, penetrates in the pipeline. When cleaning, guide-head will drive cleaning tools to clean the pipe;when arranges the cable, you may first leads the steel wire or the iron wire, then enters the pipe with the steel wire or the iron wire hauling cable.

Fibreglass duct rod/duct rodder/ fiberglass conduit rod features&benefits:

1. Strong non-conductive fiberglass rod construction

2. Stainless steel drawing head

3. For longer conduit runs and underground duct

4. Rugged tubular steel reel with adjustable position.

5. Feed device allows rod to feed out or be wound back onto reel with easy pushi or pull of rod.

6. Duct rods/duct rodders have many applications, not only pulling the cable but also pulling

7. Anticorrosion , good elasticity , long working life.

Glass fiber rod diameter
4-16mm

Length
100-500m

Working temperature
-40+80

Min bend radius
295mm

Breaking tension
4.5t

Glassfiber density
150g/m



Plastic woven
0.5*0.15*0.5m
1.5*0.5*1.5m

Cable pulling rod & push duct rodder & fiber snake rod
Epoxy duct rodder is the continuous rods sizes are 4.5mm 6mm 9mm 10mm 11mm 12mm 13mm 14mm 15mm 16mm, the duct rodders¡¯ lenghth is range 50m to 400m.

Duct rodders/rods features

Strong non-conductive fiberglass rod construction
Stainless steel drawing head
For longer conduit runs and underground duct
Rugged tubular steel reel with adjustable position.
Feed device allows rod to feed out or be wound back onto reel with easy pushi or pull of rod.
Duct rods/duct rodders have many applications, not only pulling the cable but also pulling electric tools, and it repair is very easy, and available.
Glass fiber rod diameter
4-16mm

Length
100-400m

Working temperature
-40 ~ +80

Min bend radius
390mm

Breaking tension
4500-9000kg

Glassfiber density
150g/m



Plastic woven
0.5*0.15*0.5m
1.5*0.5*1.5m

We can supply all kinds of fiberglass mesh, also we can produce according to the customers' requirements.

Plastic bag

Fiberglass Insect Screen
It is made through fiberglass monofilament plastic coating and plain weaving. All the remaining materials are finished in one time via PVC plastics.
Fiberglass window screen
Weaving and technology: adopt glass fiber monofilament plastic coating technology and is made through plain weaving, heating and sizing.
Material of glass fiber window screen: glass fiber screen, coated PVC, 65%s plastic content, 35%s glass fiber yarn; fire resistance â?¦5 seconds (international standard)
Mesh: 12x12 mesh, 14x14 mesh, 16x16 mesh, 18x16 mesh, 19x17 mesh, 20x20 mesh (inch);
Specification and dimension: width of the glass fiber window screen as produced by our factory: 0.3-3.2m; length: 13m-300m;
Color: white, black, gray, hoary (longitude: gray; latitude:white); besides, blue, green, yellow, coffee and other colors can be customized separately.
Weight: 90g-135g/m2;
Remarks: We offer ten meters product if the window screen produced by our factory one meter shorter than the expected length. In case of quality problem, we offer refund or change no matter the quantity. And the total transportation cost shall be paid by our factory.

Fiberglass Mesh is woven by fiberglass yarn as its basis mesh, and then coated by alkaline resistant latex.
Fiberglass mesh:
window screen fiberglass mesh is woven by fiberglass yarn as its basis mesh, and then coated by alkaline resistant latex. It has fine alkaline-resistant, high strength, etc. As an ideal engineering material in construction, it is mainly used to reinforce cement, stone, wall materials, roofing, and gypsum and so on.
Main size: 2.5mmx 2.5mm, 3mmx 3mm, 4mm x 4mm and 5mm x 5mm, 45gram/m2--170gram/m2.
Main characteristics:
Good chemical stability,
Outstanding craftsmanship include coating enough alkali-resist glue,
Strength retention rate> 90%, elongation

Details

The Fiberglass Ceiling Tiles are manufactured from high density fiberglass wool.The visible face has a decorative fiberglass tissue and the back of the tile is covered with normal tissue.The four edges are sealed and square.The tiles will be parallel to grids system after installation.

APPLICATION

It is recommended that the panels be installed to the opposite two walls to control the echo of the surrounding,the panels are widely used in hotels,meeting rooms,auditoriums,music rooms,libraries,etc. Where have special request for sound absorption.


INSTALLATION

1. Use grids,wh ic h size T15mm&T24mm;

2.Tiles are easy to trim and install

3.Both imperial and metric grids are available

Product Name :
Pre-Galvanized Square Pipe
Anti Corrosion Type Frp Sheet
Decorative Metal Stair Pipes
Pre-galvanized Square Pipe
Pre-galvanized Rectangle Pipe
Pre-galvanized Oval Pipe
Black Round Steel Pipe
Pre-galvanized Round Pipe
Black Square Steel Pipe
Black Oval Steel Pipe
Black Rectangle Steel Pipe
Anti Corrosion Type Frp Sheet
Flame Retardant Frp Sheet
Common Type Frp Sheet
Weather Resistant Frp Sheet
Decorative Stair Pipes
Decorative Iron Stair Pipes

Details
Flame Retardant FRP Sheet
Component: flame resistant resin
Surface Treatment: coated with melinex301 film
Fiberglass: fiber>30%
Standard thickness: 1mm,1.2mm,1.5mm,2.0mm
Heat Resistance: -45-140
Life of Using: more than 15 years

Fiberglass Insect Screen is widely used for windows screen

and corridors toprevent insects from interrupting

Fiberglass insect screening makes ideal material in industrial and

agricultural buildings to keep away fly, mosquito and small insects or

for the purpose of ventilation.

Fiberglass duct rodder is selected as a special tool for pulling electric cables and optical fibre cables in telecom, power industries, buildings and many other fields. The rod is made of fiberglass and high strength resin at high temperature, it is coated by high density polyethylene engineering plastic as its protected layer, which makes the duct rodder cover sliding on surface, durable, corrosion resistant and has good insulation performance, these make it safe for using in cable occupied duct. Along with pull head and handcart, it features easy to move and operate. The Fiberglass duct rodder will be equipped with different size of reels in accordance with the length of the rod, there are wheels on the reel to make it convenient for moving, it is an ideal tool for laying cables

Frp Fiberglass Yellow Grating 25 Mm Height

Fiber glass height from 20-50 mm

Color: yellow, green, grey, white, as request.

Largest size for each panel: 1220*3660.

Size can be cut as customized request.

FRP Fiberglass grating
Fiberglass yellow grating, platform walkway, drain cover for chemical, Non corrosion

FRP fiberglass yellow grating 25 mm height

Fiberglass grating height from 20-50 mm

Color: yellow, green, grey, white, as request.

Largest size for each panel: 1220*3660 mm.

Size can be cut as customized request.

Any inquiry, welcome to ask!

Best Regards, Antonia Lu

Raw Materials: Fiberglass Solid Epoxy resin
Diameter: 12mm, 16mm, 18mm, 20mm, 26mm , 30mm, 36mm, 40mm, 45mm, 60mm, 80mm, 110mm .
Length: as per the customer's request
Application: For Electric Industry

Raw Materials: Fiberglass Solid Epoxy resin Diameter: 12mm, 16mm, 18mm, 20mm, 26mm , 30mm, 36mm, 40mm, 45mm, 60mm, 80mm, 110mm . Length: as per the customer's request Application: For Electric Industry

Duct Rodder

LONG ZHUO specializes in high-quality cable laying and pulling tools for power construction and infrastructure, with over 10 years of experience in the industry. Our extensive product range includes duct rodders, fish tapes, wire pullers, cable grips, cable rollers, and engine-powered winches, with more than 100 types of products exported to 30+ countries such as the USA, Canada, and Australia. We are committed to integrity and quality, ensuring all products are CE certified and supporting OEM/ODM services. Our focus on efficiency and cost-effectiveness, along with our one-stop service and dedication to superior customer support, makes us a reliable partner in the cable laying industry, always ready to assist with 24-hour service for any inquiries.

Fiberglass duct rodder introduction
Fiberglass duct rodder applies in tow lead-rope through a pipe, it is auxiliary means. Surface smooth and high resilience, so the frp perforator with ease passes the narrow channel. Perforator consists of two parts: the glass fiber strengthen the level, the high-pressured low density polyethylene protective layer(smooth, firm , can resist the adverse circumstance). It has time-savingreducing effort, improving efficiency, etc, and can be used for telecom cables, cable pipe and cleaning and plastic pipe of cloths to put.When use draws out the fpr pole by the pulley, then with a corresponding metal joint, penetrates in the pipeline. When cleaning, guide-head will drive cleaning tools to clean the pipe;when arranges the cable, you may first leads the steel wire or the iron wire, then enters the pipe with the steel wire or the iron wire hauling cable .

Material: C-glass or E-glass
Specs: weight: 60 to 350g/m2
Size: 2.5x2.5mm to 10x10mm

Feature:
1. Excellent alkaline resistance and corrosion resistance
2. High tensile strength and impact resistance
3. Good dimensional stability and deformation resistance
4. Good adhesion with resins and water resistance
5. Temperature stability and flame resistance
6. Soft, flexible and well arranged, simple and easy to apply
7. Aging resistance
8. Durable, versatile and cost-effective

Usage: used to reinforce cement, plastic, bitumen, plaster, marble, mosaics, roofing, interior and exterior walls, and in other industrial applications.


Standard export packing or as request.

Fiberglass Window Screen

Fiberglass window screen woven from PVC coated fiberglass filament yarn. Fiberglass window screen makes ideal material in industrial and agricultural buildings to keep away fly, mosquito and small insects or for the purpose of ventilation. Fiberglass window screen offers excellent properties of fire resistance, corrosion resistance, heat resistance, easy cleaning, good ventilation, high strength, stable structure and non-smell etc.

1. Product Description:

Material: Fiberglass and PVC coated fiberglass

Wire diameter: 0.18mm-0.40mm

Mesh size:18x16mesh, 18x14mesh, 16x16mesh, 18x18mesh, 20x18mesh, 6x14mesh, 14x14mesh

Color:White,black,gray and offwhite or as per requirements.

Weight:100g/m2, 110g/m2,120g/m2, etc . Or produce it according your need .

Weave tech:Plain weave , twisted weave, high temperature-fixing.

Fiberglass duct rodder

Duct rodder is composed of fiberglass rod which is extruded by fiber glass rod and high strength resin at high temperature. This type of rod has high tensile strength and flexibility. It is covered by a high density polyethylene engineering plastic as it protect layer, which make duct rodder cover sliding on the surface, durable, corrosion resistant and has good insulation performance. Which make them safe for use in cable pulling in the conduit.

Duct rodders will equipped with different size reel according to the length of rod. There are wheels on the reel, which could make it easy to move.

Features and benefits:

Light weight, durable, resistance to acid, aging resistant, corrosion resistant

High tensile strength and bending properties, which make it to go through narrow pipes easily.

Good temperature adaptability, the product will not soften in hot weather/nor become brittle in cold weather. It is usability will not be affected by temperature.

Outer protect layer are made of high density polyethylene engineering plastic, which has good anti-UV capability.

cover was coated with long-term UV-resistant polyethylene.

it surface has the advantage of smooth, wear-resistant and long service life.

There are meter mark on the protect layer of duct rodder.

The length is 100m to 400m.

There are kinds of colors for the rod to choose.

Technical Data of Duct Rodders:

1. Reinforce Fiberglass core

Property
Data and Value

Reinforcement
E-Glass Fiber

Glass content of inner part
80-85%

Material of pulling rod
Epoxy fiber glass(inner) and high density polyethylene(outer)

Density
>150g/m

Diameter tolerence
¡À0.10mm

Work situation temperature
-40 ~ +80


Mechanical properties

Property
data

Min pulling strength
4000N 5%

Tensile modulus
>30000 MPa

Consistency of rod
150g ¡ 5%

Flexural modulus
>30000 MPa

Elongation at Break
2.5-3%


2. Polyethylene cover

Material: Medium Density polyethylene resin for the insulating and jacketing of telecommunication cables.

Property
Data

Tensile strength
>150N

Environmental stress & crack resistance
>1000 hr

Heat stability
ok

Carbon Black
ok



plastic woven
0.5*0.15*0.5m
1.5*0.5*1.5m

Fiberglass duct rodder & snake duct rodder & electric rodder & fiberglass duct rod & duct rodder cable & conduit rodder & cable rodder & push pull rod description:
Duct rodder applies in tow lead-rope through a pipe,it is auxiliary means. Surface smooth and high resilience,so the FRP perforator with ease passes the narrow channel. perforator consists of two parts: the glass fiber strengthen the level, the high-pressured low density polyethylene protective layer(smooth, firm ,can resist the adverse circumstance). It has time-savingreducing effort, improving efficiency, etc,And can be used for telecom cables, cable pipe and cleaning and plastic pipe of cloths to put.when use draws out the FPR pole by the pulley, then with a corresponding metal joint, penetrates in the pipeline. When cleaning, guide-head will drive cleaning tools to clean the pipe;When arranges the cable,you may first leads the steel wire or the iron wire, then enters the pipe with the steel wire or the iron wire hauling cable.

Fiberglass duct rodder technical specifications:

Glass fiber rod diameter
4.5-16mm

Length
1-500m

Working temperature
-40+80

Min Bend Radius
295mm

Breaking tension
4.5T

Glassfiber density
150g/m

1.constructed of fiberglass reinforced in the center and consists of a rugged plastic layer that would ensure the lifetime of the flexible rod.

2.Excellent flexibility force.

3.Tensile strength about 500 Kgf.

4.designed for heavy duty applications ensuring greater rigidity and strength, while supporting additional forces without resentment to the multiple curvatures.

5.Wheel assembly for easy transportation.

6.Guide rollers and the right parts for rotary coupling.

7.Rolling bearing cage flotation (reel transport) for mobility should be light and easy to use in the field, including a parking brake for the flexible rod.

8. There is copper wire inside for tracing easily.



Technical data of duct rodders



1. Glass reinforced composite core:

general properties

Property value
keinforcement E-glass fiber
glass content of inner part 75-80%
material of pulling rod epoxy fiber glass(inner) high density polyethylene(outer)
density >1.9gr/cm3
diameter tolerance +/-0.10mm
work situation temperature -40 to +80


Mechanical prperties

property value
minimum pullling strength 4000 N+/-5%
tensile modulus >30000Mpa
consistency of rod 150gr/m +/-5%
flexural modulus >30000M pa
elongation at break 2.5-3%



2. Polyethylene cover

Material:

Medium density polyethylene resin for the insulating and jacketing of telecommunications cables.

property value
tensile strength >15N/mm2
environmental stress & crack resistance >1000 hr.
heat stability OK.
carbon black OK.


packed by plastic woven, or wooden pallet.
Length 0.5-1.5m
Width 0.15-0.5m
Height 0.5-1.5m

Fiberglass mesh is made by C-glass or E-glass fibers woven roving as its basis material, and then treated with Acrylic Acid Copolymer liquid. An ideal construction engineering material, Alkali Resistant Fiberglass Mesh fabric is mainly used to reinforce cement, plastic, bitumen, plaster, marble, mosaics, roofing, interior and exterior walls, and in other industrial applications.
Specifications:
Opening Sizes: 3x3mm, 4x4mm, 4x5mm, 5x5mm,6x6mm, 8x8mm, 10x10mm
Weight: 60 - 350g/m2
Width:1-2m
Color: blue, orange, white, yellow, etc.
Packing: shrink film then carton or woven plastic bag.
Features:
í-Excellent alkaline resistance and corrosion resistance
í-High tensile strength and impact resistance
í-Good dimensional stability and deformation resistance
í-Good adhesion with resins and water resistance
í-Temperature stability and flame resistance
í-Soft, flexible and well arranged, simple and easy to apply
í-Resistance to aging
í-Durable, versatile and cost-effective
Uses: fibergass mesh is widely used to reinforce cement, plastic, bitumen, plaster, marble, mosaics, roofing, interior and exterior walls, and in other industrial applications.

Self-adhesive Fiberglass Mesh Tape: Is woven from fiberglass bulk yarn then coated with anti-alkaline resin and gum solution cut from a special machine. It could used on reinforcing wall cracks,board cracks,plasterboard cracks and marble cement,in addition to repairing drywall joints.
Features:
1.It is a kind of woven fiberglass,alkali-resistant netlike fabric that has been coated with adhesive and cut into the required sizes
2.Sizes:50mm*20m,50mm*45m,50mm*90m,50mm*150m Etc.
3.Ideal material to repair damaged dry wall,cracks and holes
4.Very easy and quick to apply it
5.packing:one roll with shrink film packing or plastic bag. Then 24 rolls or 54 rolls or 72 rolls for one carton or pallet

Fiberglass mesh is made by C-glass or E-glass fibers woven roving as its basis material, and then treated with Acrylic Acid Copolymer liquid. An ideal construction engineering material, Alkali Resistant Fiberglass Mesh fabric is mainly used to reinforce cement, plastic, bitumen, plaster, marble, mosaics, roofing, interior and exterior walls, and in other industrial applications.
Specifications:
Opening Sizes: 3x3mm, 4x4mm, 4x5mm, 5x5mm,6x6mm, 8x8mm, 10x10mm
Weight: 60 - 350g/m2
Width:1-2m
Color: blue, orange, white, yellow, etc.
Packing: shrink film then carton or woven plastic bag.
Features:
í-Excellent alkaline resistance and corrosion resistance
í-High tensile strength and impact resistance
í-Good dimensional stability and deformation resistance
í-Good adhesion with resins and water resistance
í-Temperature stability and flame resistance
í-Soft, flexible and well arranged, simple and easy to apply
í-Resistance to aging
í-Durable, versatile and cost-effective
Uses: fibergass mesh is widely used to reinforce cement, plastic, bitumen, plaster, marble, mosaics, roofing, interior and exterior walls, and in other industrial applications.

Self-adhesive Fiberglass Mesh Tape: Is woven from fiberglass bulk yarn then coated with anti-alkaline resin and gum solution cut from a special machine. It could used on reinforcing wall cracks,board cracks,plasterboard cracks and marble cement,in addition to repairing drywall joints.
Features:
1.It is a kind of woven fiberglass,alkali-resistant netlike fabric that has been coated with adhesive and cut into the required sizes
2.Sizes:50mm*20m,50mm*45m,50mm*90m,50mm*150m Etc.
3.Ideal material to repair damaged dry wall,cracks and holes
4.Very easy and quick to apply it
5.Packing:one roll with shrink film packing or plastic bag. Then 24 rolls or 54 rolls or 72 rolls for one carton or pallet

Fiberglass mesh is made by C-glass or E-glass fibers woven roving as its basis material, and then treated with Acrylic Acid Copolymer liquid. An ideal construction engineering material, Alkali Resistant Fiberglass Mesh fabric is mainly used to reinforce cement, plastic, bitumen, plaster, marble, mosaics, roofing, interior and exterior walls, and in other industrial applications.
Specifications:
Opening Sizes: 3x3mm, 4x4mm, 4x5mm, 5x5mm,6x6mm, 8x8mm, 10x10mm
Weight: 60 - 350g/m2
Width:1-2m
Color: blue, orange, white, yellow, etc.
Packing: shrink film then carton or woven plastic bag.
Features:
í-Excellent alkaline resistance and corrosion resistance
í-High tensile strength and impact resistance
í-Good dimensional stability and deformation resistance
í-Good adhesion with resins and water resistance
í-Temperature stability and flame resistance
í-Soft, flexible and well arranged, simple and easy to apply
í-Resistance to aging
í-Durable, versatile and cost-effective
Uses: fibergass mesh is widely used to reinforce cement, plastic, bitumen, plaster, marble, mosaics, roofing, interior and exterior walls, and in other industrial applications.

Self-adhesive Fiberglass Mesh Tape: Is woven from fiberglass bulk yarn then coated with anti-alkaline resin and gum solution cut from a special machine. It could used on reinforcing wall cracks,board cracks,plasterboard cracks and marble cement,in addition to repairing drywall joints.
Features:
1.It is a kind of woven fiberglass,alkali-resistant netlike fabric that has been coated with adhesive and cut into the required sizes
2.Sizes:50mm*20m,50mm*45m,50mm*90m,50mm*150m Etc.
3.Ideal material to repair damaged dry wall,cracks and holes
4.Very easy and quick to apply it
5.packing:one roll with shrink film packing or plastic bag. Then 24 rolls or 54 rolls or 72 rolls for one carton or pallet

Fiberglass mesh is made by C-glass or E-glass fibers woven roving as its basis material, and then treated with Acrylic Acid Copolymer liquid. An ideal construction engineering material, Alkali Resistant Fiberglass Mesh fabric is mainly used to reinforce cement, plastic, bitumen, plaster, marble, mosaics, roofing, interior and exterior walls, and in other industrial applications.
Specifications:
Opening Sizes: 3x3mm, 4x4mm, 4x5mm, 5x5mm,6x6mm, 8x8mm, 10x10mm
Weight: 60 - 350g/m2
Width:1-2m
Color: blue, orange, white, yellow, etc.
Packing: shrink film then carton or woven plastic bag.
Features:
í-Excellent alkaline resistance and corrosion resistance
í-High tensile strength and impact resistance
í-Good dimensional stability and deformation resistance
í-Good adhesion with resins and water resistance
í-Temperature stability and flame resistance
í-Soft, flexible and well arranged, simple and easy to apply
í-Resistance to aging
í-Durable, versatile and cost-effective
Uses: fiberglass mesh is widely used to reinforce cement, plastic, bitumen, plaster, marble, mosaics, roofing, interior and exterior walls, and in other industrial applications.

Self-adhesive Fiberglass Mesh Tape: Is woven from fiberglass bulk yarn then coated with anti-alkaline resin and gum solution cut from a special machine. It could used on reinforcing wall cracks,board cracks,plasterboard cracks and marble cement,in addition to repairing drywall joints.
Features:
1.It is a kind of woven fiberglass,alkali-resistant netlike fabric that has been coated with adhesive and cut into the required sizes
2.Sizes:50mm*20m,50mm*45m,50mm*90m,50mm*150m Etc.
3.Ideal material to repair damaged dry wall,cracks and holes
4.Very easy and quick to apply it
5.Packing:one roll with shrink film packing or plastic bag. Then 24 rolls or 54 rolls or 72 rolls for one carton or pallet.

Description


Alkali resistant fiberglass mesh is woven by fiberglass yarn as its basis mesh, and then coated by alkaline resistant latex. It has fine alkaline-resistant, high strength, etc. As an ideal engineering material in construction, it is mainly used to reinforce cement, stone, wall materials, roofing, and gypsum and so on.

We can produce any size mesh according to requirements of customer like different mesh size and weight per square meter.

We can supply special mesh as following
1. High strength mesh,


2. Fire proof mesh .
3. Strong and fl exibl e mes h




We can supply specifications from 30g/m2 to 500g/m2 for mesh.

Main size: 5mm x 5mm or 4mm x 4mm, 75 g/m2, 90 g/m2, 125 g/m2,145 g/m2, 160 g/m2.



Application


1. Wall reinforced material (such as fiberglass wall mesh, GRC wall panels, EPS insulation with the wall board, gypsum board, bitumen)

2. Reinforced cement products.

3. Used for Granite, mosaic, marble back mesh etc.

4. Waterproof membrane fabric, asphalt roofing.



Example of applications


1. 75g / m2 mesh fabric used in the reinforcement of thin slurry, to eliminate small cracks and scattered throughout the surface pressure.

2. 110g / m2 mesh cloth is widely used in indoor and outdoor walls,prevent the various materials(such as brick, light wood, prefabricatedstructure) of treatment or caused by a variety of expansion coefficient of wall crack and break.

3. 145g/m2 mesh fabric used in the wall and be mixed in variousmaterials (such as brick, light wood, prefabricated structures), to prevent cracking and scatter the whole surface pressure, especially in the external wall insulation system (EIFS).

4. 160g / m2 mesh fabric used in insulator layer of reinforcement in the mortar, through shrinkage and temperature changes by providing a space to maintain movement between the layers, prevent crack and rupture due to shrinkage or temperature change.



Specification

Mesh size 5x5 mesh, 5x4 mesh, 4x4 mesh, 3x3 mesh, 2.5x2.5 mesh, 1x1 mesh
Weight/square meter 60g-300g
Each roll length 10m, 20m, 30m, 50m-300m
Width 0.5m-2m
Mesh size 16x16 mesh, 15x14 mesh, 12x12 mesh, 10x10 mesh, 9x9mesh, 8x8 mesh, 6x6 mesh
Weight/square meter 40g-120g
Each roll length 10m, 20m, 30m, 50m-300m
Width 0.05m-2m
Packing plastic packing or woven bag or packing according the customer's requirements
Color white,blue,green,red,yellow,