Shijiazhuang Cobalt Alloy Suppliers and Manufacturers

1. Product name: Cobalt powder 2. Purity: 99.9%min 3. Particle size: 50nm, 5-10um, 325mesh, etc 4. Cas No: 7440-48-4 5. Appearance: gray black powder Characteristic. Cobalt powder is gray and irregular, soluble in acid, magnetic, easy to oxidize in wet air. It is widely used in aviation, aerospace, electrical, mechanical manufacturing, chemical and ceramic industries. Cobalt based alloys or cobalt containing alloy steels are used as high temperature heat-resistant parts and important metal materials in atomic energy industry as blades, impeller, conduit, jet engine, rocket engine, missile component and chemical equipment of turbine. As a binder in powder metallurgy, cobalt can ensure the toughness of the hard alloy. Magnetic alloys are indispensable materials in modern electronics and mechanical and electrical industries, which are used to make various components of sound, light, electricity and magnetic materials. Cobalt is also an important part of permanent magnetic alloys. In chemical industry, cobalt isused in high alloy and anticorrosive alloy, and also used in colored glass, pigment, enamel, catalyst and desiccant. Application -Water atomized cobalt powder has a relatively coarse grain size, which can be used in welding materials to improve its toughness, impact resistance and wear resistance. -Reduced cobalt powder is in fine size and high purity, can be widely used in diamond tools, powder metallurgy,

Cobalt oxide (Co203) is an expensive cobalt oxide with a theoretical cobalt content of 71.06%, an oxygen content of 28.94%, and a density of 6.079/cm3. It is a black amorphous powder that generates cobalt oxide (Co304) after heating. Cobalt oxide is an unstable compound and cannot be freed. The cobalt oxide commonly referred to actually still contains a certain amount of cobalt tetraoxide. Co203 is only stable in a hydrated state. This hydrate will dehydrate and transform into the intermediate oxide cobalt tetraoxide (Co304) at 265�°C. Cobalt oxide is reduced to cobalt tetraoxide (Co304) by H2 at 125�°C, reduced to CoO at 200�°C, and reduced to cobalt metal at 250�°C. Cobalt oxide is insoluble in water. After dissolving in water, it decomposes into hydrates when it encounters water. It is insoluble in water, but soluble in acid and forms corresponding salts.

Basic information: 1.Molecular formula: Co3O4 2.Molecular weight: 240.797 3.CAS No.: 1308-06-1 4.Purity: Co:72%min 5.Storage: Keep the receptacle sealed and stored in a cool and dry place, and ensure that the working room has good ventilation or exhaust device. Cobalt Tetroxide is similar to ferroferric oxide, and can be approximately regarded as a compound formed by cobalt oxide (CoO) and cobalt oxide (Co2O3). Black or grayish black powder. The apparent density is 0.5-1.5g/cm3, and the tap density is 2.0-3.0g/cm3. Cobalt Tetroxide can be slowly dissolved in hot sulfuric acid, but it is insoluble in water, n itric acid and h ydrochloric acid at room temperature. When heated above 1200 C, it will decompose into cobaltous oxide. When it is strongly heated to 900C in a hydrogen flame, it is reduced to metal cobalt.

Nickel is a hard, ductile and ferromagnetic metal that is highly polished and resistant to corrosion. Nickel is a ferrophilic element. The core is mainly composed of iron and nickel elements. In the crust, iron-mafic rocks contain more nickel than silico-alumina rocks. For example, peridotite contains 1,000 times more nickel than granite, and gabbro contains 80 times more nickel than granite. On October 27, 2017, the World Health Organization's International Agency for Research on Cancer released the preliminary list of carcinogens for reference. Nickel compounds are in the list of carcinogens, metal cobalt, metal nickel and 66-67% nickel, 13-16% nickel. Chromium and 7% iron alloy powders for implantation of foreign bodies in vivo, nickel metal and nickel alloys are on the list of Class 2B carcinogens. Niclkel powder is mainly used in atomic energy industry, conductive materials, battery electrode materials, chemical catalysts, hard surface spray welding, special welding rods, porous filter materials, magnetic materials, contact materials, Diamond tools, automobile manufacturing, cemented carbide, high-temperature high-strength alloys and other powder metallurgy fields.

Industrial lithium carbonate is used in the manufacture of other lithium salts, such as lithium chloride and lithium bromide and so on. It also acts as lithium oxide materials in enamel, glass, pottery and porcelain enamel, and it is also added to the electrolytic cell for electrolysis of aluminum to increase the current efficiency and reduce the internal resistance of the cell and the bath temperature.Battery grade lithium carbonate is mainly used for the preparation of lithium cobalt oxide, lithium manganese oxide, ternary materials, lithium iron phosphate and other lithium ion battery cathode materials.

Industrial lithium carbonate is used in the manufacture of other lithium salts, such as lithium chloride and lithium bromide and so on. It also acts as lithium oxide materials in enamel, glass, pottery and porcelain enamel, and it is also added to the electrolytic cell for electrolysis of aluminum to increase the current efficiency and reduce the internal resistance of the cell and the bath temperature. Battery grade lithium carbonate is mainly used for the preparation of lithium cobalt oxide, lithium manganese oxide, ternary materials, lithium iron phosphate and other lithium ion battery cathode materials.

L-tert-Leucine is an essential amino acid making up one third of our muscle protein. L-tert-leucine is important in developing chiral pharmaceutically active chemicals. It can be used as a food additive. It is used in the formation of sterols. It can also be used as the catalyst in the production of cobalt oxazolone palladacycles complex. It can also be used for the production of Chiral tridentate Schiff base ligands. Application: 1. Used as a nutritional supplement, animal feed additive for synthetic drugs 2. Amino acid is an essential component of protein, and one of its main physiological functions is as a raw material for synthetic protein.

It is widely used as a multi-functional petroleum additive, with resistance to abrasion, corrosion, oxidation and rust. it also has a protective effect on stainless steel, Iron, and nickel alloy.

2-amino-2-methyl-1-propanol appears as a white crystalline block or colorless liquid. The melting point is 30-31�ºC, the boiling point is 165�ºC, 67.4 (0.133kPa), the relative density is 0.934 (20/20�ºC), and the refractive index is 1.449 (20�ºC). It is miscible with water and soluble in alcohol Used for the synthesis of surfactants, vulcanization accelerators, acid gas absorbers. Derivatives formed with carboxylic acid compounds are used for gas chromatography analysis. Carbonyl protective reagent. Synthesis of 2,2, 2-1-2-methylazopropyl (a very useful intermediate) with high yield. The only highly effective precipitator of levopimaric acid in pine vinegar. It is an organic base used as a neutralizer and is generally used as a resin neutralizer in cosmetics. 2-amino-2-methyl-1-propanol is mainly used as a biostabilizer and pH stabilizer in the field of metal processing. The product is widely used in Europe and the United States for the concentration and post-treatment of metal processing fluids, and is the main raw material for the development of biostable formulations. It is used to increase and stabilize pH value in field replenishment to save and extend the life of metal working fluid. The product also has the advantages of anti-cobalt precipitation, low foam and so on. For the synthesis of surfactants; Vulcanization accelerator; Acid gas absorbent.

Reddish metal (face-centered cubic); very ductile. It is a good conductor of heat and electricity (next to silver). Widely used in powder metallurgy, electrical carbon products, diamond tool products, electronic materials, conductive materials, chemical catalysts, pharmaceutical chemicals, filters, radiating tubes and other mechanical and electrical parts and electronic aviation field. Product name Copper powder CAS No 7440-50-8 Size 8~12um Sublimation 500 degree Shape Powder MW 63.55 Specific gravity 3.597 g/mL at 25 �°C Applications 1. Used as a raw material for smelting and electrolyzing copper; 2. Used in powder metallurgy parts, diamond saw blades, friction materials, electrical carbon products and chemical catalyst; 3. It is mainly used to make conductive devices and alloys (bronze, brass, white copper, etc.); 4. Mainly used as raw material for copper smelting industry. 5. Reagent, alloy, electroplating.

Product Feature; (1)Maintenance-free operation. There is no need to check specific gravity of the electrolyte or add Water to battery during float service life. (2)Low self-discharge rate, small internal resistance. (3)The unique construction and sealing techniques of the battery, add the ABS plastic crust that guarantee leak proof operation in and position with no adverse effect to capacity or service life. (4)With our high quality lead-tin-calcium alloy grids, it has a long usage life and deep discharge recoverability. (5)No pollution and no harm.

Product name : Lanthanum Oxide Formula : La2O3 CAS No. : 1312-81-8 Purity : 99.9-99.999% Color : White Powder Feature * Soluble in acid and ammonium chloride, insoluble in water and ketone. Application * It is mainly used to manufacture special alloy precision optical glass, high refractive optical fiber board, suitable for making cameras, microscope lenses and advanced optical instrument prisms, etc. * * It is also used to manufacture ceramic capacitors, piezoelectric ceramic dopants and X-ray luminescent materials such as lanthanum bromide oxide powder. It is used as a catalyst for various reactions. Lanthanum oxide impregnated with lithium oxide or zirconium oxide (1%) can be used to manufacture ferrite magnets, fiber optical devices and optical glass.

Diethylenetriamine pentamethylene phosphonate sodium is an organophosphorus series scale inhibitor. Its molecular formula is C9H28O15N3P5, and its relative molecular weight is 573.2. Diethylenetriamine pentamethylene phosphonate sodium is non-toxic, miscible with water, has better scale inhibition and corrosion inhibition effect, and has good temperature resistance, which can inhibit the formation of carbonate, sulfate and phosphate scale. Especially when the pH value is 10-11, calcium carbonate still has a good scale inhibition performance, and the scale inhibition effect at this time is 2 to 3 times higher than that of hydroxy-ethylenediphosphonic acid and amino trimethylenephosphonic acid. Another outstanding feature is that the combination with manganese ions has a good corrosion inhibition ability on carbon steel and copper alloys.

CAS No: 1341-49-7 EINECS No: 215-676-4 Molecular formula: NH4HF2 Molecular weight: 38.0443 Industrial Ammonium Hydrogenfluoride [Molecular Formula] NH4HF2 [Molecular Weight] 57.04 [Properties] White needle-like crystal, easy deliquescence and agglomeration, soluble in water and slight soluble in alcohol; decompose to ammonia and ammonium bifluoride in heat water, decompose to ammonia and hydrogen fluoride when being heated, its aqueous solution is acidic and can corrode glass. [Uses] 1. Glass etchant, preservative, disinfectant, solvent for metal beryllium made of beryllium oxide, analytical reagent and surface treatment agent for silicon steel plate. 2. It is also used as an oxidant for the manufacture of ceramics and aluminum-magnesium alloys, as well as a cleaning agent for boiler feed water systems and steam generation systems. 3. Acidification treatment of oilfield sand. 4. Organic synthetic fluorinating agent. 5. Plating solution. 6. Reagents for extracting rare elements. 7. Paint industry

Molecular formula: Re Molecular weight: 186.207 CAS No.: 7440-15-5 Appearance: Dark grey Metallic Powder Specifications: main content Re 99.99% (calculated by subtraction method, excluding gas elements) Application: Rhenium element standard sample; Rhenium element additive for various superalloys; Base material for various rhenium components; 3D printing and others Hall flow (s/50g): 95% Other trace metal impurity , analysis method: ICP-MS Gas element (â?¤, analysis method: LECO Na 0.0005% Ti 0.0001% Cu 0.0001% Sb 0.0001% Mg 0.0001% V 0.0001% Zn 0.0001% Ta 0.0001% Al 0.0005% Cr 0.0005% As 0.0001% W 0.0005% Si 0.0005% Mn 0.0001% Zr 0.0001% Pb 0.0001% P 0.0005% Fe 0.0008% Mo 0.0010% Bi 0.0001% K 0.0005% Co 0.0001% Cd 0.0001% Se 0.0001% Ca 0.0005% Ni 0.0001% Sn 0.0001% Tl 0.0001% O 0.01% C 0.002% N 0.001% H 0.005% Applications 1. It is used to make heat-resistant and corrosion-resistant alloy. 2.Used for making high temperature thermocouple, special filament and catalyst in organic synthesis industry.