Available wire: usb cable, power cord, headset cord, audio cable
One year warranty, lifetime maintenance
Feature of mute high speed wire stripping terminating machine
High speed: every 0.2 seconds terminating speed
Working method: foot pedal, motor work. Computerized control.
Very easy to change die., energy saving
Stripping and terminating can be finalized at the same time.
Description of mute high speed wire stripping terminating machine
This cable lug terminal crimping machine(benchtop crimping press) adopts high-tech inverter technology, electronic precision positioning, avoids traditional terminal crimping machine clutch electromagnet common failure.
Characteristic description
V power saving environmental protection, motor runs when machine is working.
V machine mould continuum, no need to change mould, quick save time.
V voltage stability, speed, high accuracy.
V suitable for crimping computer terminal, dc terminal, single grain terminal, joint terminal.
V light and handy structure, easy moving workplace, mute operation.
Specifications
Model no.
Ll-1.0t
Ll-1.5t
Ll-2.0t
Ll-3.0t
Ll-4.0t
Maxpressure
1 ton
1.5ton
2.0ton
3.0ton
4.0ton
Mold type
Fixed mold
Otp mold, #2000 mold, jst mold etc
Power supply
220v/50hz
Air pressure
Full electric, no need air compressor
Power rating
250w
550w
750w
1000w
1500w
Net weight
25kg
35kg
50kg
55kg
75kg
Size (mm)
250x210x460
280x250x600
320x280x650
320x280x660
350x320x720
The clamp of idc connector crimping machine is adjustable, there are two kinds of specifications, the one with 1.0 maximum spacing can crimp 64p, the one with 1.27 maximum spacing can crimp 50p, 1.0 or 1.27 spacing fixture will be sent with machine at ramdon, if two specifications of fixtures both needed, pay usd100 in addition.
Characteristic description:
1 for the 8p-64p idc connector crimping machine take place of hand pliers, output of high efficiency, stable quality and simple operation.
2 minimum gas consumption, low failure rate, easy maintenance.
3 with bakelite base use, simple operation, abrasion resistance, high precision.
4 suitable for crimping cable with idc products.
5 automatic crimping the product which is feeded in, finalization and the cylinder reset, easy to operate.
6 according to the product type can be pressed 300-600 times per hour.
7 addopt 6-8kg pressure, 220v power supply
8 the body all the use of steel for operation, solid and durable, external chrome, beautiful without rust
9 distribution a set of bakelite crimping adjustable block 8-40p (oem is acceptable.)
Technical parameters:
Model no.: fshs-50
Voltage ac220v
Weight 14kg
Appearance size 250x200x330mm
Press p number 4-40p a fixture /40-64p a fixture
Available in 220v/60hz or 110v/50hz power.
Motor: 60 watts.
Compact easy relocate
Features:
•apply to general modular cord plug or uk type plug
•a quiet and highly reliable direct motor drive
•easy to setup, operation
•interchangeable tooling for different plugs
Size:260*300*780mm(l*w*h)
Weight:80kg
Power source: single phase 220vac/ 50/60hz, 10a
Total power:550w
Cylinder pressure:0.4-0.7mpa(adjustable)
Working efficiency: 12000 crimps/hour(cauculated as 12pins above ribbon cable)
Appropriate wire: 0.8-2.0mm, awg20-28,
Red blue white fbc(2468), grey fbc(2651), color fbc and etc 2-40pins
Cutting length:>70mm
Ribbon cable split length: 30mm
Crimping strength: 1.5t
This semi-automatic wire splice machine is specially designed for wire riveting processing, pressing riveting and wire connection. It has replaced the traditional soldering methods to avoid faults of no cold welding, air welding and air pollution. It is widely admitted to be the most simple and effective way.
This wire splicing machine uses special continuous copper strip terminal materials to shape moulding after being cut off. Pressing quickly at one time without waste and saving cost.
The brass strip terminal is processed by residue lines. Resistance to tension is particularly strong after riveting with stable quality.
Straight and curved mold bases can be equipped to connect with various products.
User-friendly design, easy to operate.
Scope of application:
Neon and resistor connection, led and wire connections.
Resistor and wire connection.
Slide switch and wire connection.
Connection of high temperature heating elements.
Connection of thermosensitive components (such as magnetic spring, constant temperature fuse).
Transformer tap and wire connection.
Model no.: 1.8t semi-automatic wire splicing machine
Power supply: ac110v/220v 50hz
Weight: 55 kg
Dimension (mm): 370* 400*500
Power: 1/4hp
Stroke: 2000kg
Cooper belt size: 2mm/4mm/6mm
This fully automatic cable winding and wire binding machine is equipped with step motors, adopted plc touch screen to control cable tie length, automatic cut the cable tie and twist it. The winding speed and winding cycle are both adjustable. This machine is widely used to process ac/dc power cord, usb data cable, video cable, hdmi cable, and other types of transmission line.
Model no.
Tq5-30
Tq 15-45
Applicable nylon tie binding length
65-140 mm
110-190 mm
Binding diameter
5-30 mm
15-45 mm
Binding speed
1 second per binding
Winding spacing
50-200 mm
50-250 mm
Winding speed
1-10 circles (adjustable)
Working voltage
Ac220 50/60hz
Power
Product features:
1. Automatic plc touch screen control circuit, the operation is simple and convenient, good working stability.
2. Bulk nylon cable tie achieves automatic feeding, replacing the tedious process of manual discharge.
3. Automatic wearing lock and bundling, automatically cut the tie, approx 1500 wires per hour
(depending on the product to capacity), saves time and labor, improve several times the work efficiency.
4. Degree of tightness is adjusted by digital touch screen.
5. Leaving length of tie tail is adjusted by digital touch screen.
6. No pneumatic.
Technical parameters
Mode
Bj-60
Bj-80
Bj-100
Bj-120
Bj-150
Power supply voltage
Ac220v
Power frequency
50/60hz
Rated power
100w
Applicable scope
60mm
80mm
100mm
120mm
150mm
Body size
1230x550x800mm
Body weight
150kg
This wire splicing machine is specialized and designed for the processing of wire riveting, crimping and riveting,
Connecting wire, solder to replace the traditional way, without the disadvantages of cold welding,
Air welding and air pollution, it is the simplest and effective way to pass a variety of safety tests (ul, jis ).
User-friendly design, easy operation.It adopts an inverter motor that assure noise-free working environment.
Specifications:
Brass strip size:1.0mm/1.5mm/2mm/4mm/6mm (diffirent mould decides diffirent brass strip size)
Pressure:10kn
Output: 200 pieces per minute
Power supply:220v/50hz
Power rating: 1/4hp
Net weight: 55kg
Dimension: 370x350x470mm
Applications:
1) neon and resistor connection, led and wire connections.
2) resistor lead and wire connection
3) slide switch and wire connection
4) connection of high temperature heating elements
5) connection of thermosensitive components (such as magnetic spring, constant temperature fuse)
6) transformer tap and wire connection.
1, mechanized and remote current control thrust adjustment function allows 0-100a of adjustment
2, mechanized and remote current control thrust adjustment function allows 0-100a of adjustment
3, idea for ship building, construction, rack and truck,
4, acidic and basic welding rods of various grade can be used for welding all of black metals
350pcs/20gp, 750pcs/40gp, 900pcs/40hq
Net weight:18kg, gross weight:22kg
570*305*400
1, small and lightweight, portable and durable, reliable and economical.
2, good performance with automatic compensation for voltage fluctuation.
3, idea for light fabrication, repair and maintenance.
4, acidic and basic welding rods of various grade can be used for welding all of black metals
600pcs/20gp, 1200pcs/40gp, 1500pcs/40hq,
Net weight, 5.5kg, gross weight, 8kg
440*250*320
1, small and lightweight, portable and durable, reliable and economical
2, acidic and basic welding rods of various grade can be used for welding all of black metals
Bt-101a/b enameled wire stripper is comprised of dichloromethane and organic acid. It¡¯s applied to depainting of voice coil with advantage of high efficiency.
¡ö speediness, be applied to all types of voice wire (ei 180). Suitable for assembly line.
¡ö the root of wire is clear after stripping, soldering brightly.
¡ö operating at normal temperature with no splash and spread.
¡ö viscosity can be adjusted according to the size of wire diameter.
¡ö environmental protection, low smell.
¡ö bt£101a enameled wire stripper is a ivory or colorless liquid;
¡ö bt£101b enameled wire stripper is a tea yellow paste.
¡ö proportion: bt£101a:bt£101b is 1:1, you could adjust according to the size of wire diameter. If it¡¯s too thick, please add 101a; or else, add 101b.
Enameled wire ¡ú dipping stripper¡ú depainting ¡ú wipe the coat of paint with cloth ¡ú clean wire with ethyl alcohol or water ¡ú soldering tin
Bt-101a/b uses 1kg / bottle of strong acid plastic drum to storage, 12 bottles/case;
Ll-228+p full digital intelligent wire stripper
(special for sheathed cable cutting stripping)
Description
Ll-228+p full digital intelligent wire stripper is a heavy duty speedy industrial full automatic wire stripper, controlled by a microcomputer, cut and strip wire automatically.Unexperieced user can operate it easily.Support full strip, half strip and semi-strip.Installed 200 processing programmes, no need to reset program while change product.Can be customized to hold up wheel in customer's demand.
Approriate wire: power cord, rvv (jacketed cable), rwp (shielded cable), audio cable, video cable, usp cable, data cable, phone cable.
Specifications
Model:ll-128+p
Processable wire size: awg18-awg3/0 / 1-10mm
Conduct diameter:10 max
Cutting tolerance: 0.002¡,Á,l mm (l: cutting length)
Strip length:wire head 0-50mm // wire tail 0-40mm (if hold up wheel, wire head can strip at 500mm, wire tail can at 50mm)
Total quantity:999999
Batch quantity:99999
Stripping speed:2000-5000pcs per hour
Cutting speed:0-9 adjustable
Blade material:hard tungsten steel
Power supply:ac 215-235v/50hz
Power consumption: 120w-200w
Overall size: 420mm x 400mm x 320mm
Machine net weight: 32kg /70.55lb
Driving:four wheels driving
Package:standar export wooden case
Delivery time:5-7 working days after reciept of payment
Shipping:ems/dhl/tnt/fedex or seafreight or airfreight
Overall size: 420mm x 400mm x 320mm
Machine net weight: 32kg /70.55lb
Driving:four wheels driving
Package:standar export wooden case
Delivery time:5-7 working days after reciept of payment
Shipping:ems/dhl/tnt/fedex or seafreight or airfreight
Ll-228+t full digital intelligent wire stripper is a heavy duty speedy industrial full automatic wire stripper with twisting function, controlled by a microcomputer, cut and strip wire automatically.Unexperieced user can operate it easily.Support full strip, half strip, semi-strip and automatic twisting.Installed 100 processing programmes, no need to reset program while change product.Automatic out/inlet line, timing start, unique wire stripping stacking.No.96 program is specially for ultra short wire.Very suitable for large and small variety production, transformation wire specification only need to change conduct can production.
Cutting wire size: awg14-awg30x2 ("2" stand for dual core wires) / 0.1-2.0 mm2*2
Conduct diameter: ¦µ1.5-¦µ5 mm
Twisting wire size: awg16-awg30x2
Cutting tolerance: 0.002¡Ál mm (l: cutting length)
Strip length:wire head 0.1-30mm // wire tail 0.1-30mm
Twist length:0-30mm
Total quantity:999999
Batch quantity:99999
Stripping speed:4000-8000pcs per hour
Stripping twisting speed:5000-10000pcs per hour
Pulse equilevant: no error within 1m wire.
Blade material:hard tungsten steel
Power supply:ac 215-235v/50hz (other voltage required please tell us in advance)
Power consumption: 120w-250w
Overall size: 420mm x 580mm x 320mm
Machine net weight: 35kg /77.16lb
Shortest wire twisting function:wire intermediate leave rubber skin 26 mm can be twisted.
Semi-cut strip:16 places
Driving:four wheels driving
Package:standar export wooden case
Delivery time: 5-7 working days after reciept of payment
Shipping:ems/dhl/tnt/fedex or seafreight or airfreight
Overall size: 420mm x 580mm x 320mm
Machine net weight: 35kg /77.16lb
Ll-228+m full digital intelligent wire stripper is a heavy duty speedy industrial full automatic wire stripper, controlled by a microcomputer, cut and strip wire automatically.Unexperieced user can operate it easily.Support full strip, half strip and semi-strip.Installed 100 processing programmes, no need to reset program while change product.Automatic out/inlet line, timing start, unique wire stripping.
No matter how long wire head or tail you need split, only a set of splitting blade mould can be universal.
Splitting length of front-end and back-end can be accessed to change the blade mould length parameters, do not need to move the mechanical position.
Supporting stamping equipment (common linkage terminal machine, mute terminal machine, cylinder driving stamping die, motor driving punching die, beetle punch press.)
Approriate wire:rvb wire, parallel wire
Specifications
Model:ll-128+m
Processable wire size: awg14-awg30 / 0.1-2.0mm2
Cutting tolerance: 0.002¡Ál mm l: cutting length
Strip length:wire head 0-30mm // wire tail 0-30mm
Total quantity:999999
Batch quantity:99999
Stripping speed:3000-7000pcs per hour
Cutting speed:0-9 adjustable
Blade material:hard tungsten steel
Power supply:ac 215-235v/50hz
Power consumption: 180w-260w
Overall size: 630mm x 420mm x 330mm
Machine net weight: 40kg /61.73lb
Driving:four wheels driving
Package:standar export wooden case
Delivery time:3-5 working days after reciept of payment
Shipping:ems/dhl/tnt/fedex or seafreight or airfreight
Overall size: 630mm x 420mm x 330mm
Machine net weight: 40kg /61.73lb
Ll-228+l full digital intelligent wire stripper
(special for large diameter/bold cable cutting stripping)
Description
Ll-228+l full digital intelligent wire stripper is a heavy duty speedy industrial full automatic wire stripper for large diameter cable cutting and stripping, controlled by a microcomputer, cut and strip wire automatically.Unexperieced user can operate it easily.Support full strip, half strip and semi-strip finalize in one time.Installed 100 processing programmes, no need to reset program while change product.
Approriate wire:power cord, cable wire, large diameter/bold cable
Specifications
Model:ll-228+l
Processable wire size: awg5-awg27 / 0.1-16mm2
Conduct diameter:¦µ16 max
Cutting tolerance: 0.002¡Ál mm (l: cutting length)
Strip length:wire head 0-30mm // wire tail 0-25mm
Total quantity:999999
Batch quantity:99999
Stripping speed:2000-7000pcs per hour
Cutting speed:0-9 adjustable
Blade material:hard tungsten steel
Power supply:ac 215-235v/50hz (other voltage required please tell us in advance)
Power consumption: 120w-200w
Overall size: 420mm x 400mm x 320mm
Machine net weight: 35kg /77.16lb
Driving:four wheels driving
Package:standar export wooden case
Delivery time:5-7 working days after reciept of payment
Shipping:ems/dhl/tnt/fedex or seafreight or airfreight
Overall size: 420mm x 400mm x 320mm
Machine net weight: 35kg /77.16lb
1.Small and light: with the mid-frequency transformer which is extremely smaller than the traditional welding power sources:weighing one fifth to one tenth as much as traditional welding power sources;only one third as big as the traditional welding power sources;
2.Efficient and energy-saving:because inverter welders reduce the wasted power by using less copper and steel.Over one third power consumption will be saved because the efficiency is 80% to 85% while th power factor is as high as 0.93;
3.Having step-less adjustment for welding current and voltage.Different requirement of different welding technique will be reached;
4.Stable welding with small spatter and outstanding welding performance;
5.With the function of auto-compensation against power fluctuation;
6.Design integrated;welding anywhere at any time;easy to operate.
Model MIG200S MIG250S MIG250Y MIG300Y
Net Weight 35 35 35 35
Dimension 655*300*665 655*300*665 570*295*558 655*300*665.
