Solar pump, inverter.Solar pump, inverter
Power Output: 220W Max Power Voltage:22.07V Cell Type: Monocrystalinline (166x166mm) Number of cells: 40pcs Dimensions: 1660 680 30mm Frame: Anodized Aluminium Alloy-silver Sheet: white Connector: MC4 or MC 4 comppatible Cable: 0.9m Packaging: 2pcs into one ctn box
Power Output: 550W Max Power Voltage:44.08V Cell Type: Monocrystalinline (182x182mm) Number of cells: 144pcs Dimensions: 2288 1138 35mm Frame: Anodized Aluminium Alloy-silver Sheet: white Connector: MC4 or MC 4 comppatible Cable: 0.9m Packaging: 2pcs into one ctn box
Solar energy, solar panel, solar module, solar cell.
Mono crystalline solar panel, poly crystalline solar energy, solar system, solar controller.
700W portable power generator, using LiFePO4 batteries, with AC Sockets for Different Countries: -USA Socket -Japanese Socket -European Socket -UK Socket -Australian Socket -Universal Socket (All sockets can be customized) It's Plug-and-Playlike using a power bank. Not only for outdoor activities, but also for home/work/emergency backup, etc. Equipped with AC outlet, DC carport and USB charging ports, they can keep all your gear charged.
1.1 Description Portable power station 1200W 1000Wh solar generator for outdoor activities 1.2 Battery Type LiFePO4 battery 1.3 Typical Capacity 1008Wh 1.4 Typical Voltage 3.2V 1.5 Typical power 1200W 1.6 Inverter Pure Sine Wave 1200W 1.7 Charging time 600w @2.18 hours 1.8 Charge Controller MPPT for Higher Efficiency Solar Charging 1.9 Input Charging AC charger=600W @2.18 hours Car charger=13V/9A/117W @9.12hours, 24V/8A/192W@5.75hours Solar panel=10V-60V/10A/400W@3.02hours 2.0 AC output 2 ports, 1200W 2.1 DC output 2 ports, 13.5V10A 2.2 USB output QC18W*2, PD18W, PD100W 2.3 Weight about 13kg 2.4 Dimension 395*190*220mm 2.5 Cycle life ï¼?2000 times
Solar controller Versions available: 20, 30amp 12/24 volt auto-work negative or positive ground Microprocessor which is made in usa Pwm or on/off series battery charging options State of charge (soc) battery regulation Battery ah setting, boost charging, equalising charging, float charging Automatic load reconnection, manual load switch Automatic selection of voltage (12 v / 24 v) Temperature compensation Lcd display: soc as a fuel gauge, all system parameters in digital value, system status as symbols Full circuit protection, electronic fuse � field adjustable parameters by four buttons Load control option: on/off, dusk-to-dawn, on + setting hours, setting time on/off. (for type �ii) Real clock display 20pcs/carton
Model No. eRigid P50W Feature for electric fence small solar panel poly solar panel 50w a grade cell for electric fence industrial application use Product Name Rigid Polycrystalline solar panel Maximum Power[Wp] 50 Solar Cell Poly A grade solar cell Cell size[mm] 156*49 Cell Array[Pcs] 4*9 Cell Efficiency 18.24% Size[mm] 650*510*25 Max Power Voltage Vmp[V] 19.08 Max Power Current Imp[A] 2.62 Open Circuit Voltage Voc[V] 22.51 Short Circuit Current Isc[A] 2.83 Net.Weight[kg] 4.00 Power tolerance[%] �±3% NOCT[â??] 45�±2 Operating Temperature[â??] -40/+85 Temperature Coefficient Pmax[%/â??] -0.41 Temperature Coefficient Voc[[%/â??] -0.32 Temperature Coefficient Isc[[%/â??] 0.04 Maximum System Voltage[V] 1000 V Certification CE ROHS Surface/Backsheet Glass+Aluminum/white
Model No. eRigid P50W Feature for electric fence small solar panel poly solar panel 50w a grade cell for electric fence industrial application use Product Name Rigid Polycrystalline solar panel Maximum Power[Wp] 50 Solar Cell Poly A grade solar cell Cell size[mm] 156*49 Cell Array[Pcs] 4*9 Cell Efficiency 18.24% Size[mm] 650*510*25 Max Power Voltage Vmp[V] 19.08 Max Power Current Imp[A] 2.62 Open Circuit Voltage Voc[V] 22.51 Short Circuit Current Isc[A] 2.83 Net.Weight[kg] 4.00 Power tolerance[%] �±3% NOCT[â??] 45�±2 Operating Temperature[â??] -40/+85 Temperature Coefficient Pmax[%/â??] -0.41 Temperature Coefficient Voc[[%/â??] -0.32 Temperature Coefficient Isc[[%/â??] 0.04 Maximum System Voltage[V] 1000 V Certification CE ROHS Surface/Backsheet Glass+Aluminum/white
MPPT Solar Charge Controller PC1800F Series (60/80/100A) (MPPT) MPPT (Maximum Power Point Tracking)Solar Charge Controller offer an efficient, safe, multi-stage recharging process that prolongs battery life and assures peak performance from a solar array. Each Charge Controller allows customized battery recharging. Features: LCD display , easy to operate on LCD screen Multi stage charging (3-stage charging , parallel charging and equalized charging function) BTS Battery remote temperature sensor terminal Enable to charge Li-thium, Gel , lead-acid battery With RS485 & USB communication port Protection: PV array short circuit, PV reverse polarity, Battery reverse polarity, Over charging, Output short circuit
MPPT Solar Charge Controller PC1800F Series (60/80/100A) (MPPT) MPPT (Maximum Power Point Tracking)Solar Charge Controller offer an efficient, safe, multi-stage recharging process that prolongs battery life and assures peak performance from a solar array. Each Charge Controller allows customized battery recharging. Features: LCD display , easy to operate on LCD screen Multi stage charging (3-stage charging , parallel charging and equalized charging function) BTS Battery remote temperature sensor terminal Enable to charge Li-thium, Gel , lead-acid battery With RS485 & USB communication port Protection: PV array short circuit, PV reverse polarity, Battery reverse polarity, Over charging, Output short circuit
Photovoltaic lightning protection combiner box Model: SDDL-6-1 APPLICATIONS: Large-scale photovoltaic grid-connected power generation system To reduce the wiring between photovoltaic modules and the inverter Improve reliability FEATURES: Reasonably simplify wiring, beautiful and generous Meets outdoor installation requirements Wide DC voltage input range Use photovoltaic special fuse Using special photovoltaic high voltage lightning arrester Convenient and fast maintenance Can be customized according to customer needs, optional TECHNICAL PARAMETER� Model SDDL-6-1 Photovoltaic parameters Nominal working voltageUn 1000V DC Single input short circuit current 10A Number of input ports 6 Number of input ports 1 Lightning protection parameters Nominal discharge current�8/20μs� 20KA Maximum flow capacity�8/20μs� 40KA Protection level�8/20μs� �3000V Response time Ta 25ns Mechanical characteristics waterproof level IP65 Working conditions Temperature: -40 to 80, Relative humidity: �95� Standards compliance IEC61643-1, RoHS
MPPT Solar Charge Controller PC1800F Series (60/80/100A) (MPPT) MPPT (Maximum Power Point Tracking)Solar Charge Controller offer an efficient, safe, multi-stage recharging process that prolongs battery life and assures peak performance from a solar array. Each Charge Controller allows customized battery recharging. Features: LCD display , easy to operate on LCD screen Multi stage charging (3-stage charging , parallel charging and equalized charging function) BTS Battery remote temperature sensor terminal Enable to charge Li-thium, Gel , lead-acid battery With RS485 & USB communication port Protection: PV array short circuit, PV reverse polarity, Battery reverse polarity, Over charging, Output short circuit
Original Manufacturer of Portable Power Generators,Solar Power Station,UPS Lighting Lithium Solar Power System., Solar Panel Battery Portable Emergency Power Station
1. AC pure sine wave output 2. Solar charging and car charging directly 3. Small size, light weight, easy to carry 4.QC 3.0; Triple USB ports
PV 1000 Vdc 10x38mm PV fuses A range 10x38mm, 1000 Vdc PV fuses for the protection and isolation of photovoltaic strings that are specifically designed for use in PV systems with extreme ambient temperature, high cycling and low fault current conditions (reverse current, multi-array fault) string arrays. For application flexibility, the PV 10x38mm fuse is available as a cylindrical fuse as well as bolt-on, single and dual PCB tab and in-line crimp terminal versions. Ratings Volts 1000 Vdc Amps 1-20 A IR 50 kA Terminals and conductors Crimp connection for single, 75°C/90°C Cu Stranded 12-8 AWG PV wire Agency information UL Listed to 248-19, Guide JFGA, File E335324, IEC 60269-6 (gPV), CSA File 53787, Class 1422-30 (1-15A), 20 A Pending, CCC (1-20 A), RoHS Compliant Features Meets UL and IEC photovoltaic standards for global acceptance Low watts loss performance for energy efficiency Low temperature rise performance for more precise sizing In-line crimp terminal version is easy to apply in wire harness construction Typical applications Combiner boxes Inverters PV wire harnesses Recommended fuse blocks, holders and fuseclips BPVM modular fuse block with optional cover. CHPV 1- and 2-pole modular fuse holders with optional open fuse indication. 1A3400-09 PCB fuseclip. HPV in-line fuse holder assembly. PV-1A10F PV-2A10F PV-3A10F PV-3-5A10F PV-4A10F PV-5A10F PV-6A10F PV-8A10F PV-10A10F PV-12A10F PV-15A10F PV-20A10F PV-1A10-T PV-2A10-T PV-3A10-T PV-3-5A10-T PV-4A10-T PV-5A10-T PV-6A10-T PV-8A10-T PV-10A10-T PV-12A10-T PV-15A10-T PV-20A10-T PV-1A10-1P PV-2A10-1P PV-3A10-1P PV-3-5A10-1P PV-4A10-1P PV-5A10-1P PV-6A10-1P PV-8A10-1P PV-10A10-1P PV-12A10-1P PV-15A10-1P PV-20A10-1P PV-1A10-2P PV-2A10-2P PV-3A10-2P PV-3-5A10-2 PV-4A10-2P PV-5A10-2P PV-6A10-2P PV-8A10-2P PV-10A10-2P PV-12A10-2P PV-15A10-2P PV-20A10-2P PV-1A10F-CT PV-2A10F-CT PV31A10F-CT PV-3.5A10F-CT PV-4A10F-CT PV-5A10F-CT PV-6A10F-CT PV-8A10F-CT PV-10A10F-CT PV-12A10F-CT PV-15A10F-CT PV-20A10F-CT
PVS-R 600 Vac/dc Class RK5 PV fuse A range of UL 248-19 fastacting 600 Vdc Class RK5 fuses specifically designed to protect photovoltaic power systems in extreme ambient temperature, high cycling and low level fault current conditions (reverse current, multi-array fault). Ratings Volts 600 Vac to UL 248-12 600 Vdc to UL 248-19 Amps 20-400 A IR 200 kA RMS Sym. AC 20 kA DC (20-60 A) 10 kA DC (70-400 A) Agency information UL Listed, Std. 248-12, Class RK5, Guide JFGA, File E335324. Photovoltaic to UL 248-19, CSA Component Certified C22.2, CE Features Current limitation for non-inductive circuits provides Class RK5 current-limiting response to ground fault and short-circuit conditions Designed for the protection and isolation of photovoltaic systems Typical applications Photovoltaic systems Inverters Photovoltaic system DC safety switches Recombiner boxes PVS-R-20 PVS-R-25 PVS-R-30 PVS-R-35 PVS-R-40 PVS-R-50 PVS-R-60 PVS-R-70 PVS-R-80 PVS-R-90 PVS-R-100 PVS-R-110 PVS-R-125 PVS-R-150 PVS-R-175 PVS-R-200 PVS-R-225 PVS-R-250 PVS-R-300 PVS-R-350 PVS-R-400
Solar panel: 20w/18v——1pc Led lamp: 3w/12v ——4pcs Led cable: 5meters——4pcs Mobile charging cable:five in one——1pc Built-in battery capacity: 12ah/12v Controller: 3a/12v *with fm radiao and mp3 functions
1.Solar lamp:0.6W 2.Battery:Li-ion polymer battery,800mAH 1PC 6-8hrs 3.LED:SMD3528 8PCS 0.5Watt 80LM 4.LED color:Pure white/warm white (Optional) 5.Product Size: L132*W132*H130mm Weight: 0.4 kg 6.Charging Method: solar powered/ DC input 7.IP level:IP54 8.Beam angle:120 degree 9.LED life span:more than 50000hrS 1. Product size :L136 *W 136 *H130mm Net. Weight :0.308KG 2. Color box :L145*w145*H148mm Weight :0.5KG 3. Carton size :460*470*335mm Weight :9.85KG 4. Qty : 18PCS/CTN