Plumbing - pipes, fittings, flanges, elbows & hoses.
Seamless pipe, galvanized pipe, caspipe, carbnsteel pipe fittings, flexible hose.
Pipe.
Golf, golf club, golf cap, golf bag, golf headcover, golf grip, golf umbrella.
Fitting.
Hoses, pipes, tubes, ducts.
Plastic flexible hose.
PU ducting hose, PVC ducting hose, TPR ducting hose, silicone ducting hose, flexible ducting hose, fabric ducting hose, PVC interlock ducting hose, suction ducting hose, anti static ducting hose, grit ducting hose.
Silicone rubber tube hose.
Application : As suction and transport hose ideal for: L widely used in these working environment which are likely to be create electrostatic such as tunnel, mine, basement, ship building or electric soldering and waste gas exhaust out L air conditioning and ventilation of fumes, light duty dust extraction, and air movement. L as a flexible connection between grilles diffusers, fans and other air movement units Features : L antistatic fabric suppresses electrostatic charges that are created from air friction. L kink proof , flame retandart and anti-static L highly flexible L could be compressible and easy to carry L oil, acid &alkali resistant L very small bending radius L polyester fabric coated with pvc is leakage resistant pvc L steel wire spiral is abrasion resistant with pvc Working temperature: -20 to +80 degree centigrade Materials : Wall : high tencity polyester weave coated pvc on both side pvc Spiral: reinforced steel wire Exterior spiral cover :pvc I.D: 8-39 inch Length: 10m/ roll
Features: 1.Extremely abrasive resistant 2.Extremely anti crush 3. Inside surface perfectly smooth, outside corrugated 4. Could be manufactured anti-static upon request 5.High tensile strength and tear resistant 6. Good resistance to oil and fuel 7.Good resistance to UV and ozone 8. Could be resistant to chemicals 9.Comply to REACH Material: Wall: Special PVC compounds Spiral: Rigid PVC spiral outside I.D: 1-8 inch length:15m/roll thickness: 0.4mm-4mm
Application : Clamped high temperature resistant duct, especially suitable: 1. For suction of high temperature air in engine exhaust in industry ainst abrasion 4.Firm clamping of the wall in clamp proofed 5.Good resistance to chemical substance 6.Small bending radius 7.Flame-retardant 8.Kink-proof 9.Light weight Working temperature: -70 to +260 degree centigrade approx. -70 to +400 degree centigrade approx. Available Material: Wall: silicon coated glass fiber fabric Clamp profile: galvanized steel I.D: 2-24 inch Length: 10m/roll Thickness: 0.2mmm
PTFE(Teflon) corrugated(convoluted) hose is made on the basis of plain hose. Use professional tool to process and made into corrugated shape. More flexible than the plain one. ID range: 4mm-28mm , continuous length: 20-20000mm, wall thickness range: 1-2.5mm Standard size: ID6mm, 8mm, 10mm, 13mm, 16mm, 19mm, 25mm. In plastic film, then foaming material, at last in wooden boxes/carton, reliable for shipment.
PTFE(Teflon) corrugated(convoluted) hose reinforced with stainless steel wires. More flexible and high pressure resistance Inner tube: PTFE extruded corrugated hose, features as high and low temperature resistant , anti-corrosion, anti-stickness. Outer sheath: stainless steel 304 braiding net, improve its pressure resistance and connected with fast connectors Working temperature range: constant temperature: -50 to +210 centi-degree, instant temperature, -70 to +260 centi-degree. Standard size: ID6mm, 8mm, 10mm, 13mm, 16mm, 19mm, 25mm. In plastic film, then foaming material, at last in wooden boxes, reliable for sea shipment.
PTFE (TEFLON) hose is made by plunger extrusion of suspension polymerized PTFE resin, lead insulating sleeve, corrosion-resistant PTFE pipe, and corrosion-resistant insulating PTFE pipe for different corrosive conditions, heat exchanger. Our specification: ID range: 2mm-28mm; continuous length: 50-100 meter. In plastic film, then foaming material, at last in wooden boxes/carton, reliable for shipment.
PTFE extruded hose reinforced with stainless steel wires. Inner tube: PTFE extruded hose, features as high and low temperature resistant , anti-corrosion, anti-stickness. Outer sheath: stainless steel 304 braiding net, improve its pressure resistance and connected with fast connectors. Working temperature range: constant temperature: -50 to +210 centi-degree, instant temperature, -70 to +260 centi-degree. Standard size: ID3mm,5mm,6mm,8mm,10mm,13mm,16mm,19mm,22mm,25mm. In plastic film, then foaming material, at last in wooden boxes, reliable for sea shipment.
Steel wire helix hose Application: Especally ideal for ventilation and air conditioning system, industrial vacuum cleaner, and granulate conveying systems. As suction and transport hose suitable for below substance. Gaseous medias such as vapors and smoke. Liquid medias. Small granultes such as dusts,powders and ect. Features: Highly flexible with low weigh Extremely compressible Smooth interior Highly transparent wall Small bending radius Working temperature range -20 degree to +70 degree. Material: Wall:Soft PVC Spiral:Pvc coated steel wire.
Pvc tubing 1.0mmm-50.0mm
Application: As suction and transport hose especially suitable for below substance. Gaseous and liquid medias. Small solids such as dusts,powders,chips and grains. Also ideal as ventilation hose for air conditioning and ventilation system. Features: Extremely tearing-resistant with rigid reinforced pvc helix Very smooth interior Flexible with low weight Extremely transparent High tensile strength and tear resistant Could be resistant to chemicals if requested. Could be resistant to UV if requested. Various of sizes available Wall thickness could be from 0.4mm to 4mm Wall material variable: PVC and PU Working temperature range -20 ¬C to +70 ¬C Material: Wall: Top grade of PVC or PU Spiral: Rigid PVC.
Description: 1.Forged brass can be DZR or CuZn40Pb2 2.Used for potable water system with copper, pex or cpvc pipe to deliver both cold and hot water 3.Push connect, install in second 4.Re-usable and removable 5.Full flow Features: 1.Maximum working pressure: 16 bar at 25íµ 2.Maximum working temperature: 95íµ at 8 bar 3.Available in 15mm, 22mm, 28mm 4.Referred standards: EN 1254-6 (draft).
