Many New popular mobile phones on the market both the front and back cover are glass,the back glass is fragile and extremely difficult to repair.and We launched a new machine,It can separate midframe/bezel/back glass of more than 50 smartphone models, including iPhone X/8 Plus/8 in a safe and quick way.
1. Features:
Use high output power;
3dB bandwidth of 35nm;
Industry-standard, 14-pins butterfly package;
Operating Temperature -45~+70â??;
SM fiber or PM fiber pigtail.
Reliability: Telcordia GR-468.
1. Features:
Use high output power;
3dB bandwidth of 35nm;
Industry-standard, 14-pins butterfly package;
Operating Temperature -45~+70â??;
SM fiber or PM fiber pigtail.
Reliability: Telcordia GR-468.
Kink-free operating power up to 600mW;
epoxy-free, and flux-free 14-PIN butterfly package with SM Hi1060 or PM fiber;
Fiber Bragg grating stabilization;
Wavelength selection available;
Integrated thermoelectric cooler, thermistor, and monitor diode.
Kink-free operating power up to 600mW;
epoxy-free, and flux-free 14-PIN butterfly package with SM Hi1060 or PM fiber;
Fiber Bragg grating stabilization;
Wavelength selection available;
Integrated thermoelectric cooler, thermistor, and monitor diode.
Kink-free operating power up to 600mW;
epoxy-free, and flux-free 14-PIN butterfly package with SM Hi1060 or PM fiber;
Fiber Bragg grating stabilization;
Wavelength selection available;
Integrated thermoelectric cooler, thermistor, and monitor diode.
Widely applicable to metal and non-mental materials for fine marking.
Most suitable for cosmetic processing on 3C products.
Specification:
Model DPF-M10 DPF-M12 DPF-M20 DPF-M30 DPF-M50
Power 10W 12W 20W 30W 50W
Wavelength 1064nm
Pulse Frequency 1KHz~500KHz
Pulse Width 150ps~200ns
Marking Mode 100mmÃ?100mm
200mmÃ?200mm
(Optional) 100mmÃ?100mm
200mmÃ?200mm
300mmÃ?300mm(Optional)
Marking Mode Stationary or movement marking (Optional)
Beam Diameter 0.03mm~0.05mm
Cooling Mode Air cooled
Ambient Environment Temperature:13ºC~35ºC
Humidity:5%~85%
Good ventilation and dust free
Power Consumption 700W
Electrical Connection Single -phase 220V/50~60Hz ,5A
Dimensions 1000mmx800mmx1380mm
1180mmx1200mmx1780mm
Weight 220kg/500 kg
Note: In the interest of technical progress, we reserve the right to make technical changes without notice.
FAQ
1. Q: Where is TETE Laser Technology Co., Ltd located?
A: Shenzhen TETE Laser Technology Co., Ltd headquartered in Shenzhen, CHINA. Our manufacture base covered 200,000 sq. m2 in Pingshan, Shenzhen. We support dealers and agents overseas for global market.
2. Q: Are you trading company or manufacturer?
A: We a laser machinery manufacturer dedicated to professional industry laser solutions and concentrates innovation and R&D in laser machines products.
3. Q: There are so many machine types, which one should I choose?
A: We provides machine parameters in each product demo page, please kindly check technical data column. It is important to compare all data before choose the best prototype. Also, our sales team provides online services to resolve your confusion, feel free to contact us.
4. Q: This is my first time buying your machine; I have no ideas about is your machines quality?
A: Each machine is strictly produced based on the standard of ISO9001 and CE certifications. Our products have CE certifications verified by authorized agency.
5. Q: Do you provide samples? Is it free or extra?
A: Yes, we are offering samples in free charge but not delivery fees, please contact us for more information.
Suitable for marking/cutting of various non-metal materials such as plastic, rubber, resin, ceramics, film coating, stone, leather, acrylic, wood, paper and cloth, etc.
Extensively applied in fields such as garment and wearing, leather products, electronic parts and components, pharmacy/food packaging and artworks.
Specification
Model CO2-M10 CO2-M30 CO2-M50 CO2-M60 CO2-M100
Power 10W 30W 50W 60W 100W
Wavelength 10.60μm
Laser Frequency 1KHz~50KHz
Pulse Width 100mmÃ?100mm
200mmÃ?200mm
(optional) 100mmÃ?100mm,200mmÃ?200mm
It can reach to 500mmÃ?500mm with prefocusing
Cooling Mode Air cooled Water cooled
Ambient Environment Temperature:1ºC~35ºC
Humidity:5%~75%
Good ventilation and dust free
Power Consumption 1.5KW
Electrical Connection single-phase 220V/50~60Hz ,15A
Dimensions (L x W x H) Laser Cavity:1220 mmÃ?200 mmÃ?210 mm
Control system:550 mmÃ?640 mmÃ?1100 mm
Weight 200kg
Note: In the interest of technical progress, we reserve the right to make technical changes without notice.
TETE Laser has manufactured and sold series of industrial laser processing system and provided professional industrial laser solutions to domestic and overseas customers.
Imported laser source, air cooling.
Solid and reliable design, suitable for use in harsh environments.
Stainless steel housing provides ip65 protection, completely separate cooling system ensures laser system is a key component to get the best protection, reducing maintenance requirements.
In order to do simple installation quickly, just get fiber laser coders either through the user interface settings, you can use the computer TETE software editor, or directly through the plc / line control.
Output power Laser power 10w/20w/30w
Laser wavelength 1064nm
Beam quality M2 100000h
Wide range: can be used on many materials like metal, plastic, leather, alloy etc. Can be used in many industries like jewelry engraving, medical devices, phone case engraving, hardware industry, stainless steel tableware, electron components marking etc.
Permanent marking: laser marking is a permanent marking. It wont fade, run or become less discernable as time passes like traditional marking including ink jet, hand engraving, dot-peen marking.
Long service time: fiber laser model has over 100, 000 hours working life. Almost no maintenance during this period.
Easy to operate: support almost any windows-based software like coreldraw, autocad, photoshop. No need to adjust q-switch easier than yag diode marking machine.
High precision: 0.0025mm re-position accuracy. Minimum line width 0.01mm.
Non-contact process: won't cause mechanical extrusion or mechanical stress to materials.
1. With a high quality of light spot, it is particularly suitable for precise processing processes such as line marking, cutting or punching on materials such as metal materials (carbon steel, stainless steel, aluminum and aluminum alloy, copper or copper alloy, titanium or titanium alloy, nickel alloy) and brittle materials (like glass, sapphire, ceramic, silicon chip).
2. Adopting a high-accuracy linear motor or an accurate screw, a metal or marble base, which can guarantee the accuracy of positioning and re-positioning.
3. With an independently developed cutting software, a simple operation interface and a stable operating system, it can satisfy demand for individuality.
4. The processing area adopts a closed design and the visible window's radiation protection treatment can guarantee processing safety.
1. Independent developed 3D laser marking software and hardware. To work with special 3D galvanometer scanner,it can do good marking on various 3D products.
2. Seamless splicing of 3D graphics ensures high precision processing control. The accuracy is ±0.03mm.
3. Type and power of laser module are optional according to marking,engraving or cutting requirements.
4. High Stability, optimized design of control system ensures stable processing and yield rate.
5. High Reliability, rapid cache transmission control,choice optical and electronic elements to make sure continuous work in long time and capacity.
6. Long Life Time, high quality fiber laser module ensure long life time to the system.
7. Safety, fully enclosed design which highly enhances safety during processing.
8. High efficiency, reduces processing time by equipping an automatic door in protective cover.
TETE Laser has manufactured and sold series of industrial laser processing system and provided professional industrial laser solutions to domestic and overseas customers.
Wide range: can be used on many materials like metal, plastic, leather, alloy etc. Can be used in many industries like jewelry engraving, medical devices, phone case engraving, hardware industry, stainless steel tableware, electron components marking etc.
Permanent marking: laser marking is a permanent marking. It won¡¡¥t fade, run or become less discernable as time passes like traditional marking including ink jet, hand engraving, dot-peen marking.
Long service time: fiber laser model has a over 100, 000 hours working life. Almost no maintenance during this period.
Easy to operate: support almost any windows-based software like coreldraw, autocad, photoshop.
High precision: 0.0025mm re-position accuracy. Minimum line width 0.01mm.
Non-contact process: will not cause mechanical extrusion or mechanical stress to materials.
TETE Laser equipments are widely used for laser marking, laser welding and laser cutting in various industries. Kinds of laser series meet different processing requirements.
Features
In a strict pursuit of exquisiteness, we offer an unrivaled technical quality
With advanced technical assurance, no frequency doubling crystal needs to be replaced, which can indeed reduce the cost
New UV-Laser adopts simplified optical design which improve its reliability
Fully enclosed design which highly enhances it's safety
New design and selective components can guarantee a long life time
1. Independent developed 3D laser marking software and hardware. To work with special 3D galvanometer scanner, it can do good marking on various 3D products.
2. Seamless splicing of 3D graphics ensures high precision processing control. The accuracy is ±0.03mm.
3. Type and power of laser module are optional according to marking, engraving or cutting requirements.
4. High Stability, optimized design of control system make sure stable processing and yield rate.
5. High Reliability, rapid cache transmission control, choice optical and electronic elements to ensure continuous work in long time and capacity.
6. Long Life Time, high quality fiber laser module ensure long life time to the system.
7. Safety, fully enclosed design which highly enhances safety during processing.
8. High efficiency, reduces processing time by equipping an automatic door in protective cover.
231 Laser Equipments Products Suppliers
Short on time? Let Laser Equipments Products sellers contact you.
