In a standard atmospheric pressure, the boiling point of water is 100 oC and the heat of vaporization is 2256KJ / kg. But when the pressure dropped to 610 Pa, the boiling point of water is 0 oC, the heat of vaporization is 2500KJ / kg. With the decline of air pressure, the boiling point of water decreases, and the heat of evaporating unit mass water consumed increases. Vacuum cooling technology is to put the agricultural products into vacuum chamber, and then extract air in the vacuum chamber by vacuum pump, when the vacuum degree of chamber reaches the saturated pressure of water vapor corresponding to the temperature of agricultural products, the water in the surface clearance of agricultural products like vegetables and fruits start to vapor, and the evaporation will bring away heat so as to lower the temperature of agricultural products. Further lower the pressure to reach the needed cooling temperature of agricultural products. Because of simple principle and fast cooling speed, vacuum cooling technology is widely used in preservation, transportation and storage of the agricultural products.
ALLCOLD Vacuum Cooler Advantages:
1.Retain freshness and nutrition;
2.Prolong preservation time and shelf-time;
3.Fast cooling speed and uniform cooling, normal 20 to 30 minutes cooling duration for each cycle;
4.Restrain and kill bacteria and animalcule, no pollution to products;
5.Evaporated water is about 2 to 30% of total goods weight, no partial dry shrink;
6.Film restoration effect. Repair of small scars of vegetables and fruits.
Options:
1.Skid Options: Whole skid & Split type
2.Function Options: Hydro system &Water spray system
3.Door Options: Manual Door/Horizontal Sliding Door/ Upwards Lifting Door/ Vertical Lifting Door
ALLCOLD will design and offer the most suitable machine according to clients'requirements.
Please contact ME to get more technical information & quotations.
Business Field Of Us:
1.Vacuum Cooler For Vegetables/Flowers/Fruits
2.Cooked Food Vacuum Cooler
3.Modified Atmosphere Packaging Machine(MAP Machine)
4.Tube Ice Machine
5.Flake Ice Machine
6.Block Ice Machine
7.Plate Ice Machine
8.Cold Room
The benefits of choosing us:
1.As a mature manufacturer of fresh keeping technology and refrigeration technology.Our products quality are guaranteed, energy saving and high efficiency.
2. As a responsible manufacturer, we will attentively manufacture each machine.Your request makes us improve,and your satisfaction is our eternal pursue.We will meet customers' demands from various professional fields with first-rate products and services.
3. Safety protection products and environmental-friendly design to reduce greenhouse gas emissions.Here at ALLCOLD we have worldwide sourcing ability and creat great future .
4. Grown Together and make win-win success with clients and cooperative partners.
Specification:
Size: Customized
MOQ: 5000 pcs
Material: PBAT+PLA
Color: Brown
Usage: Snack bar, snack bar, cake shop, restaurant
Features: Keep the taste of sandwich and keep your hands clean when you use it
Specification:
Size: 8 inches or customized
MOQ: 5000 pcs
Material: cornstarch
Color: White
Usage: fast food restaurant, breakfast restaurant, snack bar, household
Features: Store food in compartments to keep it fresh
Specification:
Size:5*15cm or customized
MOQ: 5000 pcs
Material: Cornstarch
Color: Natural Color
Usage: Fast food restaurant, breakfast restaurant, snack bar, household
Features: Classify and store food
1498 Food Products Suppliers
Short on time? Let Food Products sellers contact you.
Our Aaadvantage:
1.Motor: Using well-known brand motor with high-performance, protection class IP23, IP54, F class insulation.
2.Control panel: LG electric control panel, easy operation, long lifetime.
3.Displayer:LCD displayer: Multi-language display interface, clear and convenient, 24-hours all day automatic work.
4.Radiator : Shell &tube condenser with simple structure, side cover design, easy maintenance, built-in external thread copper pipe, fine sealing, strengthen heat exchange capacity.
5.Compressor: Here many international famous brands to choose, , SANYO, Copeland and so on.
6.Evaporator: Shell &tube evaporator with simple structure, side cover design, easy maintenance, built-in external thread copper pipe, fine sealing, strengthen heat exchange capacity.
Shenzhen hailingke refrigeration machinery equipment co., LTD. Is a focus on industrial refrigeration equipment, industrial temperature control equipment and plastic machinery peripheral equipment r&d/production/sales/service in the integration of modern high-tech enterprises. From its inception the company has been identified as high-quality talent to promote the development of continuous innovation strategy, in recent 10 years, by gradually bring higher technical personnel at home and abroad enterpri
Advavtage
1.Motor: Using well-known brand motor with high-performance, protection class IP23, IP54, F class insulation.
2.Control panel: LG electric control panel, easy operation, long lifetime.
3.Displayer:LCD displayer: Multi-language display interface, clear and convenient, 24-hours all day automatic work.
4.Radiator : Shell &tube condenser with simple structure, side cover design, easy maintenance, built-in external thread copper pipe, fine sealing, strengthen heat exchange capacity.
5.Compressor: Here many international famous brands to choose, , SANYO, Copeland and so on.
6.Evaporator: Shell &tube evaporator with simple structure, side cover design, easy maintenance, built-in external thread copper pipe, fine sealing, strengthen heat exchange capacity.
Application:
Reaction kettles, extrusion forming equipment, rubber forming machinery, cast film production lines, cable extrusion production lines, the dies for precise plastic molding, the dies for the compression casting of magnesium/aluminum/zinc alloy, roller pressing applied in rubber/plastic and leather industries, crude oil heating of the oil sinks on tankships, paper making industry, bottle blowing, and so on.
This Mold Temperature Control System has been designed to maintain a constant temperature, using water or oil as medium. Mold temperature controller is used to control temperature in various industrial fields.
Burabi Smart Baby Formula Dispenser, Milk Maker , App Contorl, BPA Free, With FDA, FCC, CE, RoHS, RCM Certificates
Burabi Smart Formula Milk Maker Pro identifies different formula brands and stages, realizing automation of accurate measuring, proportioning and mixing of water and formula powder. Just one simple touch of a button on the panel or your smart phone, you can get a formula bottle to the desired temperature and concentration in seconds. No pre-heating time, no shaking needed, enjoy the smart and delightful baby feeding experience.
Model numberï¼?O2S-GW/1707
Dimensionsï¼?376x246x312mm
Colorï¼?grey/purple
Weightï¼?4.0Kg
Powder container capacityï¼?400g
Water tank capacityï¼?1.7L
Materialsï¼?Tritan Ex401/Food-grade PP/Food-grade silicone/ABS
System requirementï¼?IOS7.0/Android4.3(and above)
Transmission modeï¼?Wi-Fi
Rated frequencyï¼?50/60Hz
Rated power/Rated voltageï¼?see type plate on the bottom of the appliance
ï�¬ It can prepare babyâ??s bottle in a few seconds, cause it measures and mixes water and formula powder based on advised temperature and concentration automatically. Precision feeding on powder dispensing and temperature control. Say goodbye to the hassle of manually preparing babyâ??s bottles.
� It is Wi-Fi enabled and connects to smart phone. You can control the machine with phone and track every feed and growth data on the app.
� Instant heating function(Thermoblock), no pre-heating time, say goodbye to constant temperature and repeatedly boiling water.
� Airtight formula container: holds 450g of formula powder. Water and formula powder are stored and ready to use
� The funnel is the only place where the formula powder and water mix, most bottles will be completely mixed and no additional shaking required. The water comes out vertically and the formula powder is dispensed by the gram.
� Choose your baby preferred temperature.
ï�¬ The CLEAN button â?? to clean the internal hose
� Bottle can be precisely measured at desired temperature, perfectly mixed with minimal air bubbles or cakes.
� It works with all bottle sizes and most formula brands and types. The app has recorded over 5,000 formula information.
� Invention Patent, Utility Model Patent, Design Patent
� Lights on the panel will disappear when the machine is idle. Low energy consumption
ï�¬ Childlockâ??a childproof feature that pauses machine operation
� 3 mains parts: detachable and washable
� This product was designed to operate on 220V-240V (can not be used with an electrical converter)
� Water tank: graduation markings.
� Easy access to hot, cold and room temperature water is available with the push-button controls which makes it easy to prepare instant beverages, soups and more.
Product Application of Vacuum Cooler
1.Vacuum Cooler is the quickest and most cost-effective cooling system for vegetable, fruits, flowers & more.
2.Vacuum cooler, which can strongly improve your product quality and at the same time reduce your cooling costs, is now becoming an acceptable investment for almost all vegetable growers!
3.Vacuum Cooler cools fresh product quickly and uniformly in large loads within 15-30mins/cycle, also suitable for packed produces.
ICEUPS will design and offer the most suitable machine according to clients'requirements.
Vacuum Cooler Machine Condenser System Type�?
1) Air condenser:The simplest construction, suitable for small system.Easy to integrate.
2) Water condenser: Low cost, efficient and easy to install. Perfect for most districts climates.
3)Evaporative condenser: Optional system for dry climates, or if water availability is limited.
Product Application of Vacuum Cooler
1.Vacuum Cooler is the quickest and most cost-effective cooling system for vegetable, fruits, flowers & more.
2.Vacuum cooler, which can strongly improve your product quality and at the same time reduce your cooling costs, is now becoming an acceptable investment for almost all vegetable growers!
3.Vacuum Cooler cools fresh product quickly and uniformly in large loads within 15-30mins/cycle, also suitable for packed produces.
ICEUPS will design and offer the most suitable machine according to clients'requirements.
Vacuum Cooler Machine Condenser System Typeï¼?
1) Air condenser:The simplest construction, suitable for small system.Easy to integrate.
2) Water condenser: Low cost, efficient and easy to install. Perfect for most districts climates.
3)Evaporative condenser: Optional system for dry climates, or if water availability is limited.
Machine name vacuum cooler
Model kms-2p
Processing capacity 1000kg/20-30minutesccording to cool goods
Cooling temperature from 40 to 0djustable
Vacuum chamber l5500w1400h2000 mm
Unit dimension l11800w2080h2426mm
Total power 61.95kw
Power supply 380v-3ph-50hz
Net weight 16500kg
Refrigerant r404a
Evaporating -15
Condensing temp. +40
Max ambient temp. 40
Compressor hanbell screw
Max ambient temp. +400c
Supply water temp(tws) 180c
Fruit&vegetable cooling temp. 0~80c
Outdoor air humidity 6075%
Drought and wet bulb temperature 27
Compressor type hanbell screw compressor
Cooling system air cooled condenser
Machine name flake ice machine
Model no. Kms-5t
Daily capacity 5000kg/24h
Ref.Capacity 30kw
Reducer power 0.5kw
Circulating water pump power 0.25kw
Cooling fan power 0.45kw
Water pressure 0.1mpa~0.5mpa
Total power 23.13kw
Compressor power 20.12kw
Cooling tower pump 11kw
Saltwater pump power 0.016kw
Water feed pipe 3/4
Weight 3840kg
Unit dimension 5050x2150x2600mm
Ice storage size 4000x3500x2500mm
Standard ambient temp. +250c
Water inlet temp +180c
Condensing temp. +400c
Evaporating temp. -220c
Power supply 480v/3phase/60hz
Refrigerant r404a
Compressor type bitzer piston compressor
Cooling system water cooled condenser
Water supply fresh water
Flake ice thickness 1.5~2.2mm
Plc control display in english
The fruit washing waxing drying grading line is efficient and precise. It's widely used for grading apples, pears, persimmons,onions,lemons,mangos,pomelo,jujube,and other round fruits. It is controlled by PLC, and is highly intelligent. Weighing, logic calculation, counting are integrated.
Tetrafluoroethylene is covered onto the working surface to keep the machine running stably with low noise and increase the shelf life of the machine. The operation and maintenance of the machine is easy and laborsaving. And, the efficiency of it is about 1.5 times of that of the traditional machine...
Advantages and applications:
For cleaning and waxing fruits, such as apple, citrus, lemon,orange, honey pomelo,mango etc.to make the fruit appearance look bright, and improve the fruit price for sale. At the same time, after waxing, a layer of wax membrane will be coated on the fruit to keep the fruit away from bacteria and elongate the fruit storage time.
Main parameters
Separation grade 8-12
Max weight to be sorted 500g
Min weight to be sorted 50g
Precision ±3g
Throughput 40,000pcs/hour
Total power 7.5KW
Power supply AC380V, 50H
This machine including two part:
1.washing and waxing part
a. for cleaning and waxing fruits, such as apple, citrus, navel orange, honey pomelo etc.
b.to make the fruit appearance look bright, and improve the fruit price for sale. At the same time, after waxing, a layer of wax membrane will be coated on the fruit to keep the fruit away from bacteria and elongate the fruit storage time.
2. Electric Grading part
a.This electronic fruit grader is efficient and precise. It's widely used for grading apples, pears, persimmons,onions,lemons,mangos,pomelo,jujube,and other round fruits.
b.It is controlled by PLC, and is highly intelligent. Weighing, logic calculation, counting are integrated.
c.Tetrafluoroethylene is covered onto the working surface to keep the machine running stably with low noise and increase the shelf life of the machine
