In our company, we have the stock of Diesel flow meter of all calibers. From this, it is not hard to find that our company has sufficient funds and our products sale good. Nowadays, there hardly exist companies who own the ability to keep stock. But we dare and have the strength to do that.
ITEM SPECIFICATION MODEL WAW-25 EACH CARTON WEIGHT 10KG AND 20KG CARTON SIZE (L*W*H) 381*290*230MM, 381*290*330MM PUSH EMPTY CARTON BY MANUAL WEIGHT TOLERANCE (20-25KG) AROUND 50G CONTROL PLC PROGRAM CONTROL WITH TOUCH SCREEN When weighting to 10kg or 20kg, the system will close the valve automatically and send the carton with powder to outside through driven rollers for packing.
Sst20 inclinometer based on vigors advanced tilt measurement technology, to meet with low cost, high reliability and volume application, performs high performance-cost ratio. Sst20 employed most universal & mass-produced components, casting aluminum alloy house, universal high reliability m12-5pin industrial connector; full epoxy seal with ip69k protection, auto-test/calibration equipment which not only ensure delivery speed, also keep the consistency of goods. Thanks for vigor engineers, they adopt advanced technologies as: - cae/eda simulation; - modal test for both housing and pcb to eliminate resonance due to vibration; - comprehensive performance & function test for component & firmware; - calibration technology based on sst300 high accuracy inclinometer; - refer mil/ en/ iso/iec standards to enhance sst20 durability & reliability. Sst20 support remote diagnosis without disass embling. Mtbf more than 10 years per time. Can work in 10m submersible depth long time and has better emc ability. Sst20 output rs485/ca n/canopen and voltage/curre nt signals. Better power management to meet with automotive /truck/vehicle application without regulated power. Oem service is available with calibrated pcba or mil qualified.
Sst0513 quasi-dynamic inclinometer: = 0.32g acceleration within 5s time Can/canopen & relay output Set 2 alarm points each axis Relay life=5 10 6 Range 90 or 360 Resolution 0.01 , accuracy 0.05 Compensated cross-axis and temp. Drift errors
Features ·aluminum die-casting case ·20mm lcd display with backlight ·aa*3 battery ·optional colors ·capacity: 30kg~300kg ·unit:kg/lb/n ·size: 140*52*25mm
Ultra mini size with multi-function Checking, animal weighing , parts counting, percentage, accumulating , weight hold , preset tare Version: Mini-e led display with 0.56' ;and 15 led diodes indication Mini-l lcd display with 0.8' and 25 indication Parameters: Plastic front face and steel back Size:170*78*40mm Mini-l (0.8â??lcd, 25 indication); mini-e (0.8â??led, 15 indication) 5 function keys 1/60000 high s-? a/d conversion 2 rs232; 4 units: kg , g, lb, oz 8 at 350 ohm load cells connection Linearity calibration on or off 3.7v2.6ah li rechargeable battery Extend optional: Connect to rs232 wireless to connect With display or pc
This model is mainly used for balancing rotating work pieces, Such as large and medium- sized motor rotors, blowers, pump impellers, centrifugal, drying cylinders, and rollers, mine ventilator etc. The gimbals -driving offers several rotational speeds, large driving power, high precision and easy operation etc. Specification Parameter: Mass scope of workpiece(kg) 2000 Mass diameter of workpiece(mm) 1800 The distance between two bearing pedestals(mm) Min100 Journal diameter on roller carriages(mm) 40-240 Distance from coupling flange of drive shaft to center of farthest bearing (mm) 1800 Spindle speed(r/min) 280/560/900/1800 Motor Power(kw) 7.5(variable-frequency) Universal coupling torque(N.m) 300 Minimum achievable Residual Unbalance(emar) 1g.mm/kg. Fumigated wood box.
This balancing machine is widely used in balancing rotatable bodies, such as kinds of good-sized and medium-sized motors, turbocharger,textile machinery, fans,shaft, etc .. Driven by belt,it is simple to load and unload,quick to start and with high precision and low failure rate. Specifications: Parameters Max Mass of Workpiece (kg) 50 Max Diameter of Workpiece (mm) 700 Distance between Two Support Bearings (mm) 80--700 Journal Diameter Scope of Workpiece (mm) 8~80 Diameter Scope of Driving Belt (mm) 18~200 Rotation Speed when the Diameter of Driving Belt is 100mm (r/min) 650/1000/1300/2000 Motor Power (kw) 0.55/0.75 Min Achievable Residual Unbalance Amount (emar) 0.5g mm/kg Fumigated wood box.
This balancing machine is widely used in balancing rotatable bodies, such as kinds of good-sized and medium-sized motors, impeller,roller,textile machinery, fans, shaft, etc. Driven by belt, it is simple to load and unload, quick to start and with high precision and low failure rate. Specifications Parameters: Max Mass of Work piece (kg) 160 Max Diameter of Work piece (mm) 1000 Distance between Two Support Bearings (mm) 150--1200 Journal Diameter Scope of Work piece (mm) 10~140 Diameter Scope of Driving Belt (mm) 30~350 Rotation Speed when the Diameter of Driving Belt is 100mm (r/min) 798/1274/1596/2548 Motor Power (kw) 1.3/1.8 Min Achievable Residual Unbalance Amount (emar) 0.5g mm/kg. Fumigated wood box.
This balancing machine is widely used in balancing rotatable bodies, such as kinds of good-sized and medium-sized motors, crankshaft, textile machinery, fans, shaft, etc .. Driven by belt, it is simple to load and unload, quick to start and with high precision and low failure rate. Specifications Parameters Max Mass of Workpiece (kg) 50 Max Diameter of Work piece (mm) 700 Distance between Two Support Bearings (mm) 80--700 Journal Diameter Scope of Work piece (mm) 8~80 Diameter Scope of Driving Belt (mm) 18~200 Rotation Speed when the Diameter of Driving Belt is 100mm (r/min) 650/1000/1300/2000 Motor Power (kw) 0.55/0.75 Min Achievable Residual Unbalance Amount (emar) 0.5g¡¤ mm/kg. Fumigated wood box.
Model No.: AC-55B Weighing Range: 1-55kg Accuracy: +/-15.0g Max. Detection Speed: 30pcs/min. Weighing Table Length: 1600mm Weighing Table Width: 1000mm Belt Width: 850m Reject System: Air Pusher for option Conveyor Height: 600mm+/-50mm Power Source: AC220V; 50Hz; 1P;10A .
Model No.: CW-145 Weighing Range: 6-300g Accuracy: ¡À0.2g Speed: 150pcs/min. Belt Width: 145mm Reject System: Air Jet or Air Pusher or Swing Arms Power Source: 0.4-0.8Mpa;4L/min. Conveyor Height: 750mm+/-25mm Working Condition: Temperature 0 ¡ãC - 40 ¡ãC Power Source:AC220V;50HZ;1P;10A.
* Standard RS-232 interface. * 13 standard units to be chosen. * LCD display(backlight for option),single/double display for option. 8pcs/carton.
* Standard RS-232 interface. * 13 standard units to be chosen. * LCD display(backlight for option),single/double display for option. 8pcs/carton.
This model of weighing indicator adopts plastic case, wiht good quality and powerful functions. It has weighing function, counting function, accumulation fuction and check weighing function. Real time o?lock and RS232 interface Auto calibration Low power detect, charging status indication Approval model with 3000 Up to 30000 display resolution Simple counting Check, management weigh Auto switch on off Hold function
QS30 is designed for highest precision determining the capacitance and dielectric dissipation factor tanª- of liquid and solid insulants, cables, capacitors, line transformers, generators, motors, bushings etc. Furthermore, it can also be used for power loss measurement on shunt reactors or similar apparatus. The system performs Semi-Automatic measurement of Dissipation Factor (tanª-) & Power Factor (cosª+) and Capacitance. Ití»s designed to help you modernize your testing facility at an affordable price and, ití»s simple to operate. We can also provide the professional solutions and equipments for: withstanding voltage testing, c & tan-delta (power factor) testing, partial discharge (PD) testing and impulse voltage testing.
Main board: special for pos using cpu:piii 1.3g memory: 512 m (can be expanded to 1g) hard disk:80g ether web:10/100m parallel port:2 port usd: 4 usb port Keyboard: special for pos printer:pos 5890 thermal printer(50mm/s) display head:led 8 bits and 4 part display Cash box:400a intellective cash box Scanning gun: ic magcard and barcode card Power supply:180 w big power Operate temperature:0-40íµ System:windows 98/2000/xp Datebase:microsoft sql server mension:494mm*479mm*584mm G.W 18.5kg N.W 17.5kg
Tcs-a-3 series platform scale indicator Features: 1. Three windows display to show weight and price. 2. Ac/dc supply, internal rechargeable battery available for hours 3. Anti-electricity or anti-magnetic to be selected. 4. Led display and lcd display. 5. Easy to set the parameter and convenient to operate. 6. Applied in various platform scale series. 7. Owning independent manufacture license. Specification: 1. Capacity:1kg-50t series 2. Humidity: ín85%rh 3. Temperature:0-40íµ 4. Resolution:1/3000 f.S or 1/15000 f.S
1. Ac/dc supply, tare at all range 2. High precision sensor, accurately weighing 3. Power saved function 4. Dual and double display 5. Lcd displaying setting to change 6. Overloading alert, low power alert Capacity 300g 600g 1.5kg 3kg Division 0.01g 0.02g 0.05g 0.1g Minimum 0.2g 0.4g 1g 2g Resolution 1/30000 Dimension(mm) 170*230*70(mm)
1.Smart design with bright dual íºcled display 2.Auto calibration and waterproof 3.High precision load cell lead to a fast and exact display 4.Ac/dc supply , with internal rechargeable battery 5.Easy to operate , high performance Capacity 1.5kg 3kg 6kg 15kg Division 0.5g 1g 2g 5g Superior division 0.2g 0.5g 1g 2g Minimum 10g 20g 40g 100g Resolution 1/3000 Dimension(mm) 225*245*155
