Indicator

CS1 Process Indicator: View File Measuring linear signal 0 10V and 0(4) 20mA in one indicator(input code: AV) Option available 1 of 1 relay, 1 analogue output or RS485(Modbus RTU mode) 1 relay can be programmed individual to be a Hi / Lo / Hi Latch / Lo Latch energized with Start Delay / Hysteresis / Energized & De-energized Delay functions. Analogue output or RS 485 communication port in option CE Approved & RoHS

Stainless steel 316. 500 pcs in one carton

The product shows signal of sensor and micro voltage output sensor, which used strain gauge (load, torque pressure etc) into digital display and analogue output as indicator, and intermediate or high sampling and comparison output are available. - Rapid sampling speed (5000 times/sec) - High resolving power (16bit A/D) - High accuracy (over 0.02% F.S) and stability - Calibration of actual load and sensor output value - System error automatic return - Unit conversion (kg, N, ¡×¢´b, kg/¡×©÷, bar, Mpa) - Auto zero function (Display & analogue out zero).

This model of weighing indicator adopts plastic case, wiht good quality and powerful functions. It has weighing function, counting function, accumulation fuction and check weighing function. Real time o?lock and RS232 interface Auto calibration Low power detect, charging status indication Approval model with 3000 Up to 30000 display resolution Simple counting Check, management weigh Auto switch on off Hold function

Basic function: High precision a/d conversion with readability to 1/30000 Easy to set and read the inner code for observing and analyzing tolerance without using weight Special software to enhance the anti-vibration ability Zero-tracking range set , zero(auto/manual) range set; zero-tracking speed set;. The velocity of zero adjustment could also be set. Setting digital filter velocity, range and stability period With counting function, weight saving protection against power failure Multi-type backlight selectable Rechargeable and indication of remaining battery power Low power protection With a 6v/4ah battery without maintenance Rs232 interface optional, baud rate selectable, communication mode selectable 20ma current loop scoreboard interface optional Recommendation Kg/lb display selectable Automatic average calculation 2 fixed value output for low speed weighing check 640*460*470mm, 0.14cbm, g.W.24kg n.W.23kg. 8pc/carton

PH INDICATORSPH INDICATORS Sr. No. Product Sr. No. Product 51 EVAN'S BLUE 76 PHENOL RED (ACS GRADE) 52 GIEMSA STAIN 77 PHENOL RED SODIUM SALT (ACS GRADE) 53 HYDROXY NAPHTHOL BLUE (ACS GRADE) 78 PONCEAU S 54 JENNER STAIN 79 PYROGALLOL RED 55 LEISHMAN STAIN 80 PYROCATECHOL VIOLET 56 MAY-GRUNWALD STAIN 81 ROSE BENGAL 57 METHYL ORANGE (ACS GRADE) 82 SODIUM DIPHENYLAMINE SULFONATE (ACS GRADE) 58 METHYL RED (ACS GRADE) 83 SPADNS 59 METHYL RED HYDROCHLORIDE 84 SUDAN III 60 METHYL RED SODIUM SALT (ACS GRADE) 85 SUDAN IV 61 METHYLTHYMOL BLUE COMPLEXONE 86 THYMOL BLUE (ACS GRADE) 62 1-NAPHTHOLPHTHALEIN 87 THYMOL BLUE SODIUM SALT (ACS GRADE) 63 NAPHTHOL GREEN B 88 THYMOLPHTHALEIN (ACS GRADE) 64 NEUTRAL RED 60% 89 THYMOLPHTHALEIN COMPLEXONE 65 NEUTRAL RED 90% 90 TITAN YELLOW 65% 66 NILE BLUE CHLORIDE 91 TOLUIDINE BLUE O 67 NILE BLUE SULPHATE 92 TROPAEOLIN O 68 NILE RED 93 TROPAEOLIN OO 69 NITROSO-R-SALT 94 TRYPAN BLUE 70 ORANGE G 95 WRIGHT STAIN 71 ORCEIN 96 XYLENOL ORANGE TETRASODIUM SALT (ACS GRADE) 72 PAN INDICATOR 97 p-XYLENOL BLUE 73 PAR INDICATOR MONOSODIUM SALT 98 XYLIDINE PONCEAU 2R 74 PARAROSANILINE HYDROCHLORIDE 75 PHENOLPHTHALEIN COMPLEXONE

Ultra mini size with multi-function Checking, animal weighing , parts counting, percentage, accumulating , weight hold , preset tare Version: Mini-e led display with 0.56' ;and 15 led diodes indication Mini-l lcd display with 0.8' and 25 indication Parameters: Plastic front face and steel back Size:170*78*40mm Mini-l (0.8â??lcd, 25 indication); mini-e (0.8â??led, 15 indication) 5 function keys 1/60000 high s-? a/d conversion 2 rs232; 4 units: kg , g, lb, oz 8 at 350 ohm load cells connection Linearity calibration on or off 3.7v2.6ah li rechargeable battery Extend optional: Connect to rs232 wireless to connect With display or pc

Electronic weight indicator kit Compact and rugged instrument designed for any type of weight, force measurement application, to operate under any type of conditions. It is very simple to use and operate and is very user friendly. It is ideal for tabletop scales, weigh platforms, crane scales, conversion kits, weigh bridges, milk weigh bowls, tank-weighing systems, check weighers, packaging machines, bagging machines Apart from weighing related applications, it can also be used for force measurement applications such as in universal testing machines, spring testing machines, dynamometers, presses (mechanical, hydraulic or pneumatic) Its prominent features are - + Full software calibration + Provision for extra display + Provision for battery back-up + Provision for various options such as rs232 / rs485 output, printer output, two set points + Options of Class 2, 3, 4 or dual range General technical specifications: -Load cell excitation: ¦ 5V DC -Load cell drive capacity: 1 no. 350 W load cells (6 nos. optional) -Load cell connection: 4 wire or 6 wire -Input signal range: 0 to 30 mV -Sampling rate: 4 per second -Internal resolution: 40,000 counts -Display resolution: 1,000 to 15,000 counts -Accuracy class: Acc. To IS:9281 Class II, III, IV or dual range -Non- linearity: +/- 0.05 % of F.S. -Zero temperature co-efficient: +/- 0.01% RO/¦C/h -Span temperature co-efficient: +/- 0.01% RO/¦C/h -Drift of no-load output with temperature: +/- 0.05% -Drift of no-load output after 1 hour: +/- 0.15% -Drift of full scale output after 1 hour: +/- 0.01% Calibration: Full digital software calibration through keyboard (also possible through PC keyboard with MODbus protocol) Weight display: 5 digit 7 segment LED 12.7mm with negative sign Indications: Tare, Gross & Set points, through LEDs Keys: Micro keys (sealed membrane keyboard optional) Operating temperature range: 0 ¦C to +50 ¦C Storage temperature range: -10 ¦C to +70 ¦ C Operating voltage: 230 VAC +10%, 50 Hz (Optional - 110V AC, 12 VDC)

Bypass level indicator