MS2000 is a one component silane end-capped polyether sealant, containing no solvent, no isocyanate, no small organic silicon molecule nor polymer. It's environmental friendly, low VOC, without contaminating substrate. It is cured by absorbing the moisture in the air at room temperature. Usually not need a primer before apply. It could adapt to thermal expansion and contraction duo to inherent elasticity, It performs good adhesive to variety of construction materials such as concrete, cement, stone, glass, etc., therefore it could be commonly used.
We mainly produce Silicone tapes,silicone print tape,silicone print band, silicone print ribbon, silicone antiskid head lamp belt,silicone anti-slip belt,silicone print belt, silicone non-slip tape,silicone no-skid tape,Knitted Elastic tapes,Woven Elastic tapes,,silicone gripper tape for clothing,silicone printed logo tapes,etc Order process: 1 send me your artwork to quote, 2 after confirm the price, we will make the artwork for you approve, 3 approved the artwork 4 pay the 30% deposit, then make the sample 5 take pictures for your check the sample quality, 6 after approve sample, arrange make the bulk 7 payment 70% balance payment 8 send the labels to your required address 9 feedback from your for further orders TIPS: In order to quote you ASAP, Please email us your label artwork, we need to know the size, color, quantity to quote. The label artwork is better to send us PDF or AI format file, JPG format is also ok for us to quote.
We mainly produce Silicone tapes,silicone print tape,silicone print band, silicone print ribbon, silicone antiskid head lamp belt,silicone anti-slip belt,silicone print belt, silicone non-slip tape,silicone no-skid tape,Knitted Elastic tapes,Woven Elastic tapes,,silicone gripper tape for clothing,silicone printed logo tapes,etc Order process: 1 send me your artwork to quote, 2 after confirm the price, we will make the artwork for you approve, 3 approved the artwork 4 pay the 30% deposit, then make the sample 5 take pictures for your check the sample quality, 6 after approve sample, arrange make the bulk 7 payment 70% balance payment 8 send the labels to your required address 9 feedback from your for further orders TIPS: In order to quote you ASAP, Please email us your label artwork, we need to know the size, color, quantity to quote. The label artwork is better to send us PDF or AI format file, JPG format is also ok for us to quote.
Silicon wafer.
PU foam sealant, silicone sealant, acrylic sealant, PU foam cleaner, foam gun, caulking gun.
Chemical polyurethane, silicon adhesive and sealant.
Silicon wafer, silicon ingot, mono si, single crystal.
Silicone sealant, pu foam, insulating glass sealant.
Poly silicon, silicon ingot, silicon wafers, solar wafers.
1. 1:1 addition type, good adhesive strength and self-healing 2. High elongation, excellent flexibility for mechanical stress relieving 3. Low oil penetration after cured, good anti-poisoning property 4. Good dielectric in high temperature for high voltage protection 5. Excellent aging resistance and weatherability 6. Excellent waterproof, corrosion prevention, moisture proof and chemical media resistance Used for encapsulation of various modules, semi-conductor, IGBT, automotive ECU module, IC chip, weighing sensor, waterproof connector. PROPERTY STANDARD/UNITS VALUE of SI2709 ---- ---- PART A PART B Material ---- Polysiloxane Hydrogen polysiloxane Color Visual inspection Colorless Liquid Colorless Liquid Viscosity 7;C, cps 800~1000 800~1000 Density 7;C, g/cm3 0.99 0.99 Mixture/mass ratio ---- A:B=100:100 Viscosity of mixture 7;C, cps 800~1000 Operation time 7;C, min 60 Cure condition RTV or HEAT 7;C /6 hour;67;C /30min Cured appearance ---- Colorless transparent gel Needle penetration 1/mm 75 Dielectric strength KV/mm 25 Volume resistance DC500V, ohm-cm 1.0¨¢1015 Loss factor 1 MHz88;0.001 Dielectric constant 1 MHz 2.8 Application temperature7;C -60~260 Part Aa10 KG/Bucket, Part Ba10 KG/ Bucket.
1.Solvent free two component material 2.Transparent both before and after cured 3.Platinum catalyzed curing system 4.No by-products after curing 5.Low viscosity before cured, easy to application 6.Excellent flexibility, free from stress 7.Extremely low oil exudation, good anti-poisoning 8.By adjusting the mix rate of part A and part B, can adjust the gel adhesion 9.It can stick repeatable 10.It can use with polyethylene release liner 11.Pass test of physiological compatibility, poison cell, skin stimulus etc. PROPERTY STANDARD/UNITS VALUE of SI2721 ---- ---- PART A PART B Material ---- Polysiloxane Hydrogen polysiloxane Color Visual inspection Transparent Liquid Transparent Liquid Viscosity 7;C, cps 61;¨¤150161;¨¤150 Density 7;C, g/cm3 0.99 0.99 Mixture/mass ratio ---- A:B=100: (80~120) Viscosity of mixture 7;C, cps 800¨¤150 Operation time 7;C, min ¡ê¾60 Cure condition RTV or HEAT 7;C /6 hour; 67;C /5min Cured appearance ---- Transparent gel Application temperature §C -60~200 Part Aa20 KG/Bucket, Part Ba20 KG/ Bucket; Part Aa200 KG/Drum, Part Ba20 KG/ Drum. Part A is also available in 200 kg metal drums accompanied by the corresponding 200 kg of Part B.
5N-6N
Silica fume Analysisresult 900 (%)920 (%)940 (%)970 (%) Sio289.0292.0994.896.77 K2o1.321.120.630.26 Na2o0.520.420.350.29 Ph value8.187.786.607.10 Loi 750f¦1.801.600.900.80 Moisture content (when bagged) 0.41 0.400.430.41 Coarse particles:·+45 micron 64.732.6 Specific surface area (b.E.T.)1 8 m2/g19 m2/g19 m2/g19 m2/g Bulk density(kg/m3) 200~350 (900u)200~350 (920u)200~350 (940u) 500~600 (900d)500~600 (920d)200~350 (940u) 800kg/jumbo bag, 20'fcl contains 16 tons.
Insoluble sulfur HS OT20 / Insoluble sulfur OT20 / Insoluble sulfur HD OT20 / Insoluble sulfur IS7020 Specification: Appearance: Non-dusting yellow powder. Total Sulfur Content %: 79.0-81.0 Insoluble Sulfur (On total Sulfur) % min.: 90 Thermal stability (105 deg. x15min) % min: 80 Thermal stability (120deg. x15min) % min: 40 Oil Content%: 19.0-21.0 Acidity (H2SO4) % max.: 0.05 Heating Loss (60deg.x4h) % max.: 0.50 Ash Content % max.: 0.15 Sieve Residue (150m) % max.: 0.30
Insoluble sulfur OT33 / Insoluble sulfur IS6033 Specification: Appearance: Non-dusting yellow powder. Total Sulfur Content %: 66.0-68.0 Insoluble Sulfur (On total Sulfur) % min.: 90 Thermal stability (105 deg. x15min) % min: 80 Thermal stability (120deg. x15min) % min: 40 Oil Content%: 32.0-34.0 Acidity (H2SO4) % max.: 0.05 Heating Loss (60deg.x4h) % max.: 0.50 Ash Content % max.: 0.15 Sieve Residue (150�¼m) % max.: 0.30
Insoluble sulfur IS7020 Specification: Appearance: Non-dusting yellow powder. Total Sulfur Content %: 79.0-81.0 Insoluble Sulfur (On total Sulfur) % min.: 90 Thermal stability (105 deg. x15min) % min: 80 Thermal stability (120deg. x15min) % min: 40 Oil Content%: 19.0-21.0 Acidity (H2SO4) % max.: 0.05 Heating Loss (60deg.x4h) % max.: 0.50 Ash Content % max.: 0.15 Sieve Residue (150m) % max.: 0.30
Insoluble sulfur OT20 / Insoluble sulfur HD OT20 / Insoluble sulfur HS OT20 Specification: Appearance: Non-dusting yellow powder. Total Sulfur Content %: 79.0-81.0 Insoluble Sulfur (On total Sulfur) % min.: 90 Thermal stability (105 deg. x15min) % min: 80 Thermal stability (120deg. x15min) % min: 40 Oil Content%: 19.0-21.0 Acidity (H2SO4) % max.: 0.05 Heating Loss (60deg.x4h) % max.: 0.50 Ash Content % max.: 0.15 Sieve Residue (150m) % max.: 0.30
Insoluble sulfur OT20 / Insoluble sulfur HD OT20 / Insoluble sulfur HS OT20 Specification: Appearance: Non-dusting yellow powder. Total Sulfur Content %: 79.0-81.0 Insoluble Sulfur (On total Sulfur) % min.: 90 Thermal stability (105 deg. x15min) % min: 80 Thermal stability (120deg. x15min) % min: 40 Oil Content%: 19.0-21.0 Acidity (H2SO4) % max.: 0.05 Heating Loss (60deg.x4h) % max.: 0.50 Ash Content % max.: 0.15 Sieve Residue (150m) % max.: 0.30
Polyurethane sealant, polyurethane adhesive, epoxy adhesive, silicone adhesive, MS Sealant.
Silicone gel-filled mammary implants, silicone nasal implants, silicone skin tissue expander, silicone scar gel sheet.