We are a leading supplier of electroplating chemicals, industrial polishing and welding consumables, water treatment, powder coating, fertilizers. We stock and carry an extensive range of ready to use chemicals. We deal with so many different chemicals and we would like you to contact us for more information about our different chemicals and products.
Description
Our insulating glass silicone sealant is a neutral curing silicone sealant with high modulus and high strength, purposely designed for glazing insulating glass. It has the advantage of low air permeability. Our insulating glass silicone sealant works with two-component mixing equipment and the two components react quickly after mingled in scale, then cures to elastomer.
Applications
As a secondary edge adhesive sealant in insulating glass units.
Silicone sealant characteristic
1. High strength silicone sealant with long shelf life, designed and tested for the construction and structurally
Glazed curtain wall.
2. Cures at room temperature under the action of cross linker and catalyst in part ii to give a permanently flexible silicone rubber.
3. Silicone sealant is two-component.
4. Neutral solidification, no corrosion to the construction materials as coating glass, metal, coagulation, marble
And granite etc.. It is a special silicone sealant designed for the installation and fixation of caviti-glass.
5. High modulus, strength and adhesive property to meet the demand of the installation and fixation of
Caviti-glass.
Color & package:
Part i: 190l white
Part ii: 19l black
A component 200l iron drum
B component 20l plastic drum
Or a component 20l plastic drum
B component 250ml plastic tube or 310ml plastic tub
It is based on moisture curing polyurethane, containing safety propellant, is used to seal gaps and crevices with very high expansion yield UP TO 65 LITERS, the post-expansion is quite low to prevent deformation. The foam that dispenses from aerosol can is moisture cured and draws humidity from the air for pipes, windows and doorframes. Foam can be cut once fully cured, provides excellent bond to lumber, plywood, concrete, metals, masonry and other substrates.
LN-PS201 is a one-component, medium-modulus polyurethane sealant that cures on exposure to atmospheric humidity. It possesses excellent adhesion to all typical construction materials such as cement based materials, brick, ceramic, glass, wood, galvanized and painted sheet iron and various plastics.
INSTRUCTIONS
l Before application, be sure that joint surfaces are clean, dry and free of all contamination, l Apply sealant evenly, If necessary, use masking tape and remove the tape while the sealant is still soft,
l Joint width/depth ratio should be 2:1 (Table 1),
l If necessary, use back up material to adjust joint depth,
l Sealants should adhere to only two surfaces of the joint: Use backer rods and bond breakers to facilitate.
STORAGE AND SHELF LIFE; l 12 months if stored in its original package, away from direct sunlight and moisture, between +10 �C and +25 �C
Acetic GP Silicone removable Sealant fact cure sealant adhesive for indoor
Supply Ability:
1000000 Piece/Pieces per Month high quality windshield structural auto glass silicone sealant
Packaging & Delivery
Packaging Details
For 260ml,24pcs/carton,carton size:295*195*24mm,2080ctns/20ft
For 300ml,24pcs/carton,carton size:307*207*250mm,1850ctns/20ft
For 590ml,20pcs/carton,carton size:360*250*200mm,1550ctns/20ft
Port: Qingdao Port
Lead Time : 5-15 days, depends on order details, payment time
Colors:
Clear, Black,
White, Grey,
Brown, Bronze ,
requested by customer
2019 New Arrival Free Samples Mirror Glass Window Car Windshield Rubber adhesive for corian
Performance
Standard
Measured Value
Testing Method
Test at 50±5% RH and temperature 23±20C:
Density (g/cm3)
±0.1
0.97
GB/T 13477
Tack-Free Time (min)
180
12
GB/T 13477
Tack-Free Time (min)
80
1000
GB/T 13477
Tensile Modulus (Mpa) /23
0.4
0.18
GB/T 13477
Slumpability (mm) vertical
not change shape
not change shape
GB/T 13477
Slumpability (mm) horizontal
30
GB/T 13477
Curing Speed (mm/d)
23
As Cured -After 21 days at 50±5% RH and temperature 23±20C:
Hardness (Shore A)
20~60
34
GB/T 531
Tensile Strength under Standard Conditions (Mpa)
/
0.4
GB/T 13477
Elongation of Rupture (%)
/
88
GB/T 13477
Movement Capability (%)
20
20
GB/T 13477
Storage
12 Months
General Purpose Acetic silicone sealant Product Features Acetic cureing , quickly curing, excellent adhesion Excellent resistance to low and high temperature change Good anti-aging propetry Main Appplication All kinds of glass engineering bonding and sealing. Used for bonding various glass cabinets Storage 12 months under dry codition ,blow 27 Package 260ml/300ml 24 pieces per carton
