Product Material TPU film (thermoplastic polyurethane elastomer) material as the substrate,and precision coating nanometer repair coating and high - performance pressure sensitive adhesive coating products,both plastic and rubber excellent characteristics. Product Structure The product has five layers. The first layer is surface protective film, the second layer is self-repairing coating, the third layer is TPU film, the fourth layer is adhesive layer, and the fifth layer is release film. Product Features NANOLINK paint protection film products, professional used for car and other vehicles paint and interior surface protection. To reduce the car damage caused by the impact or wear of gravel, sand, and various chemicals in the harsh natural environment material damage to the finish. Visually, if the car appears to be dinged up, rusty, scratched, worn out and rough, it will suffer from a poor resale value. Dropping your resale value by a few hundred to a grand, and weakening your selling power. Paint protection Film can solve this problem.Buyers want original paint, and as close to perfect condition as possible. If you protect your vehicles paint, and keep it as close to just off the showroom floor as possible this gives you a selling advantage. With buyers who would be willing to pay a premium if said vehicle had good quality original paint.
Composite pu seam sealing tape Composite pu seam tape are 2-layer seam tape. One layer is pvc, another is pu. Model no.: qg-100, qg-101 Thickness: 0.08 mm, 0.10 mm, 0.12 mm Standard width: 18 mm, 20 mm, 22 mm Color: transparent, white Product features: 1. Superior anti-fraying and extending the lives of garment. 2. Low melting viscosity, high adhesion, superior resistance against washing . 3. Stick on the pvc or pu coated fabric for long, then used for tent and other waterproof, cold against clothes. Application : Suitable fabric: tpu and pu coated fabrics, a variety of waterproof clothing. Usage: all kinds of waterproof, cold against clothes , raincoat, waterproof tent etc. Technology standard: According to comes from different national customers¡¯ various requirements. We can do many kinds of eco-friendly standard and low- toxin demand. Welcome to contact with our company for other special requirement. And now we can enumerate several standard as follow: 1. The azo-dye standard; 2. The pahs standard. 3. The phthalates
12mic metallized PET films 2.2 OD
Opetical density: 2.2 od or 1.8 od Max width: 2100 mm Mini width: 57 mm using for flexible duct 1. 3000 meters/roll 2. 6000 meters/roll 3. 12000 meters/roll 4. 24, 000 meters/roll
Od: 2.2 od or 1.8 od Max width: 2100 mm Mini width: 57mm 3000 meters/roll 6000 meters/roll 12000 meters/roll 24000 meters/roll
1. Double-side or sigle-side copolymer coating.Colors is green. 2. Length: 1030-5000m 3. Width: 12-800mm 4. Steel base thickness: 0.15/0.155mm 5. Film thickness: 0.050mm 6.Total thickness: 0.21/0.25mm 7.Tensile strength >300mpa 8.Elongation>15% 9.Peeling strength>6.13n/cm 10.Heat seal of tape>17.5n/cm 11.Usage:for cable armouring Sea worthy packing
Mica tape 1)composition: mica tape backed with fiberglass fabric. 2)application: insulation layer for electric wire and cable. 3)standard thickness: from 0.08mm-0.17mm Pad, spool
3inch or 6 inch paper core Optical density : 1.8 or 2.2. Plywood packaging.
Material: PE,etc(Excellent raw material) Supply period: All the year around If you are interested in this product, please as follows: 1. Customized structure, size and printing designs are welcome. 2. Please advise the material, thickness, size, printing color, style and quantity you prefer and other requirements, we will give you the best price. 3. The picture relevant to the products have been provided for reference only. We don’t have any intellectual property rights over the trademarks on display, and are not selling any product containing these trademarks. 4. Our payment terms including T /T, L/C. 5. The Samples are available free of charge, but the samples shipment/postage must be borne by sample collected. We can make according to your requirement.
Material: PE\PP (Excellent raw material) Supply period: All the year around If you are interested in this product, please as follows: 1. Customized structure, size and printing designs are welcome. 2. Please advise the material, thickness, size, printing color, style and quantity you prefer and other requirements, we will give you the best price. 3. The picture relevant to the products have been provided for reference only. We don’t have any intellectual property rights over the trademarks on display, and are not selling any product containing these trademarks. 4. Our payment terms including T /T, L/C. We can make according to your requirement.
Biodegradable plastic Material: PE,etc (Excellent raw material) Supply period: All the year around If you are interested in this product, please as follows: 1. Customized structure, size and printing designs are welcome. 2. Please advise the material, thickness, size, printing color, style and quantity you prefer and other requirements, we will give you the best price. 3. The picture relevant to the products have been provided for reference only. We don’t have any intellectual property rights over the trademarks on display, and are not selling any product containing these trademarks. 4. Our payment terms including T /T, L/C. 5. The Samples are available free of charge, but the samples shipment/postage must be borne by sample collected. We can make according to your requirement.
Material:PE(Excellent raw material) Supply period:All the year around If you are interested in this product, please as follows: 1. Customized structure, size and printing designs are welcome. 2. Please advise the material, thickness, size, printing color, style and quantity you prefer and other requirements, we will give you the best price. 3. The picture relevant to the products have been provided for reference only. We don’t have any intellectual property rights over the trademarks on display, and are not selling any product containing these trademarks. 4. We can make according to your requirement. The standard lot size , weight , dimensions may have custom-made according to the customer request.
Cf01 are series of decorative self adhesive films which are used three-dimensional textured vinyl that reflects light the same way as real carbon fiber parts to imitate the real carbon fiber effect. It is comprised of color textured vinyl with clear permanent adhesive and pe coating silicon release paper. Depend on your orderquantity, 150um*1.52m*50m/roll.
1. Advantage * Economical type, money saving, * Short term outdoor using. 1~1.5years * Soft film, good uneven holding ability Specification: Vinyl thickness Liner Width Length INK 80 micron 120g/m2 paper 0.914/ 1.06/1.27/1.37/1.52m 50m Solvent, eco, UV 2. Use area HK102 is intended for making graphics in the following area * Body of car, bus, truck, subway sign graphics * Flat wall body * Other flat substrates such as foam board, banner sheet 3. Limitation This type is not recommended for the following applications: * High substrates light block area * Dirty, solvent cleaned, grease, silicon coating which affect the adhesion of the glue. * Lacquered or painted surfaces freshly. The dried lacquered must be tested by user for compatibility 4. Temperature ranges Minimum application temperature > 9XC Service temperature range - 15XC to~ 70XC 5. Shelf life: 1 year in material's original packaging, storage temperature of 15-22 deg C. (80-100)um*(0.914,1.06,1.27,1.37,1.52)m*50m/roll.
Advantage * Suitable Solvent, ECO ink printing * 180g rigid high weight art paper, easy for lamination and field installation. * Soft vinyl (28Pa hardness) is suitable for arched glass surface. * Strong adhesion, anti-wind, anti UV. * Complete removable glue, no glue leaving behind the window after using Specification: Hole Ink diameter Open rate Film thickness with glue Liner Paper Width Solvent ECO UV 1.6mm 40% 150micron 180g art paper 1.27 / 1.37 /1.52m Yes Yes NO 2. Use area GK1001 film is intended for making graphics in the following area * Window of car or bus sign graphics * Building window for sign * Interior glass sign faces * Other transparent substrates such as transparent acrylic, polycarbonate 3. Limitation This type is not recommended for the following applications: * The surfaces of substrates are dirty, solvent cleaned, grease, silicon coating which affect the adhesion of the glue. Great K2 Industry Co., Ltd R & D Center - 2 - * The glass has built-in heating, defrosting elements or wipers * Restrict the safe operation of emergency window exits 4. Temperature ranges Minimum application temperature > 9XC Service temperature range - 25XC to + 75XC 5. Shelf life: 2 year in material's original packaging, storage temperature of 15-22 deg C, relative humidity of 50¡ã55%. 6. Durability: 1 year in outdoor solution. But it also depends on printing method and ink. Correct substrate preparation and maintenance of vinyl will enhance durability. 7. Technical data Composition High gloss vivid white/black vinyl Thickness with glue 150 Film micron Shrinkage after application ¡Õ1.1% Adhesive Type Clear Acrylic Solvent, pressure sensitive Removable ability Removable Adhesive Thickness 0.02¡Ó0.003 mm Adhesion 2.4 pounds/inch (Acrylic and uncoated, clear polycarbonate) 180 degree pull back testing. Type Rigid PE coating silicon art paper Weight 180g/m2 Release force 40g Liner SA rate >85% Salt water testing 100h/23XC no variation. 150um*(1.27,1.37,1.52)m*50m/roll.
Bitmap specification of owv ps1012 Items description Surface material Composition glossy, colorful , calendered monomeric pvc film Thickness of film 80 micron Glossiness 50 Perforation diameter:1.8mm / 1.6mm, distance:2.55mm Perforation rate 50% Shrinkage
Magnetic tape with dispenser 3m, 5m, 8m and so on 43.5*22*40mm
PVC Stretch Ceiling Film Is a widely used interior decoration material in recent years. The soft film needs to be manufactured in the factory after measuring the smallpox size in the field. The dimensional stability of the soft film is between -15 �° C and 45 �° C. PVC Stretch Ceiling Film� Is a widely used interior decoration material in recent years. The soft film needs to be manufactured in the factory after measuring the smallpox size in the field. The dimensional stability of the soft film is between -15 �° C and 45 �° C.� Translucent Ceiling Film� can be used with various lighting systems (such as neon lights, fluorescent lights, LED lights) to create fantastic, indoor lighting effects. Specifications as following: Product Name PVC Stretch ceiling film Roll Size 3.2*100m softness 46P Surface textured Color White Items Required Test Data Result Outlook qualified Width (cm) � � � � � � � � 320 320.4cm qualified Thickness � � � � � � 0.18mm�±0.005 0.18mm â??â?? GSM, g/ã?¡ 200�±5 202 qualified Chromatic aberration â?³E â??â?? 0.90 â??â?? L 93.51 a 0.41 b -1.88 transparency% â??â?? 57.5 â??â?? Stretching MPa Vertical â?¥13 17.3 qualified Horizontal â?¥13 17.8 qualified Breaking% Vertical â?¥200 211.6 qualified Horizontal â?¥200 214.2 qualified Right-angle tear strength KN/M Vertical â?¥45 121.5 qualified Horizontal â?¥45 134 â??â?? Main Characters of Decorative Stretch Ceiling Film � Fireproof: B1, ASTM, BSSTANDARD476 PART 7 CLASS IY � Energy saving: Less lights needed to make good visual effects � Anti-bacterial: BIOâ??PRUF functioned, makes the good Anti-bacterial result � Waterproof: he installation structure adopts a closed design, so when it encounters a leak, it can temporarily support the sewage and let the owner deal with it in time. � Colorful: Made with different surface treatment, and can be printed with digital printer, makes vivid color designs. � Innovative: Shaped by the structures, easy to install, and long life span.
We are manufaturing company in China for all kinds of PVB films from basic level to High-end level at best competitive price. Please send us your requirement through mail or wechat 18516280126. We hope for the good and long term relation with our customer.
A cross-laminated polyolefin film HDPE Strength Films is made with high-strength film, a cross-laminated polyolefin film, which provides the tear-, burst- and puncture-resistant properties. Main Features: 1. High-strength film, a cross-laminated polyolefin film, which provides the tear-, burst- and puncture-resistant properties, the waterproof performance is better than a conventional film. 2. Solved the problem of wrinkle and burst after construction without padding HDPE polymer sheet. 3. The membrane, after technical processing, has a function of anti-ultraviolet, even prolonged exposure after construction; the appearance quality will not affected up to 6 months or so. 4. With a resistant of high and low temperature, the membrane can adapt to climate change of the hot and cold regions. Excellent elongation and tensile properties, the membrane also could be adapted to the deformation of base structure. 5. The membrane has a special puncture resistance, self-healing and continued tear resistance, and excellent water tightness. Applications: construction waterproof in basements, subways, tunn els, pools, roofing, underground garage, roof, planting greenery, roof garden z
