Features It is a composite tile made by aluminum panel and mineral fiber /fiberglass panel. It completely integrates the mineral fiber/fiberglass panel tile's comprehensive anti-resistant effect with high density aluminum panel, so as to substantially improve the flatness and anti-resistant effect of the tile. After installation, with three layers design of our product, the mineral fiber/fiberglass panel and aluminum panels effectively block the air convection, so that it achieves its purpose of energy saving and heat preservation, at the same time provides good acoustic effect. Application: Shopping mall, office building, stadium, airport, factory, school, hospital, bank,hotel, conference hall , meeting room and theatres etc. Products Data: Acoustical: (NRC>0.80) Flatness, Insulation ,energy saving Friendly environment, anti-resistant Fireproof: Class A Thickness(mm): 10,15 Size(mm):600x600,600x1200,300x1200 Other sizes can be customized.
ACM thickness:2mm, 3mm, 4mm, 5mm, 6mm. Aluminum thickness:12mm, 0.15mm, 0.18mm, 0.2mm, 0.25mm, 0.3mm, 0.4mm, 0.5mm. Panel size:1220mm*2440mm (regular),1250mm*2440mm,1500mm* 5000mm. Package:suitable for the container Payment:30% prepayment by T/T before production, 70% balance by T/T before shipment, or 100% irrevocable L/C at sight. Delivery time:10-15 days from the date that we get your prepayment.
Aluminum composite panel Specifications: 1) standard size: Thickness (t) : 1 mm, 2 mm, 3 mm, 4mm, 5mm Width (w) : 1220 mm£¬1250mm Length (l) : no limitation 2) aluminum thickness: 0.3/0.4/0.5mm 3) acp total thickness: 1mm, 2mm, 3mm, 4mm, 5mm, 6mm 4) max width: 1, 600mm 6) coating (layer): pvdf, polyester, granite serials, wooden serials, shining peal serials, some special surface serials, and customer¡¯s samples available. 7) core: fire-resistant polyethylene or normal polyethylene(pe) 8) standard specifications can be altered to meet customer¡¯s specific requirements Please contact me if you are interested in our products, please contact me
Aluminum plastic composite panel Specifications: 1) standard size: 1220*2440 2) aluminum thickness: 0.026----0.5mm 3) acp total thickness: 1mm, 2mm, 3mm, 4mm, 5mm, 6mm 4) max width: 1, 600mm 5) coating (layer): pvdf, polyester, granite serials, wooden serials, shining peal serials, some special surface serials, and customers samples available. 6) core: fire-resistant polyethylene or normal polyethylene(pe) 7) standard specifications can be altered to meet customers specific requirements
Aluminum composite panel We are an aluminum composite panel (acp) manufacturer located in shanghai city (the most vigorous economic region in china). We have 7 products lines with a anuual capacity of 10, 000, 000.00 square meters. The acp thickness we can supply 1 to 6mm and the width is less then 1600mm. We have advantage on 0.03 to 0.5mm for aluminum thickness. Coating (layer): pvdf, polyester, granite serials, wooden serials, shining peal serials, some special surface serials, and customer¡¯s samples available. For more detailed information about our company, please visit our website. If there is anything you are interested in, please feel free to contact me.
Aluminum mushroom growing shelf We imported the technics to produce the aluminum mushroom growing shelf/shelves, and after several years of export, our aluminum mushroom shelves have been exported to Netherland, Ireland, UK, Poland, USA, Mexico, Canada, Australia, Japan, Thailand etc. There are some features of our shelves: Material: we use 6005 and 6063A aluminum alloy, which could give a high hardness: 6005 above HW14, and 6063A above HW12. This could give the whole shelves a better firmness and weight load. While the aluminum has a good Corrosion resistance. Anodizing: we anodizing some parts of the shelves: legs, sideboard, endboards to make it have a better Corrosion resistance. Other parts could also be anodized as per you choice. Load weight: the shelves could load at least 150kgs/M2
Alucobest aluminum composite panel is a new decorative material used ever increasingly by developers, designers and architects world wide for various applications. The advantages of using this material over conventional material like stone, tiles and paint are far too many. Alucobest aluminum composite panel also known to many as sandwich panel consists of a polyethylene core sandwiched between two aluminum sheets. These panels are very versatile and can be used in many applications. The entire panel consists of 3 main layers. The top aluminum sheet is coated with either polyester or PVDF paint. The core is either normal polyethylene based or a fr (fire-resistant) core which is specially treated for fire resistance. The bottom aluminum sheet comes in either mill finish or if customers require we can provide a thin layer of polyester paint coat with (6~8um) backside paint
Cool goal panel is composed of a polyethylene (pe) core between two aluminum sheets, and coated with polyester resin or extra-durable PVDF (fluorocarbon) resin as a composite structure with excellent character such as fire proof, water proof, heat-insulated, sound-insulated and resistance against corrosion, pollution and wear. Standard size: 1220 (width) x2440 (length) x3 (thickness) mm 1220 (width) x2440 (length) x4 (thickness) mm Standard color: 30 kinds Special size: Thickness: 2mm, 5mm, 6mm Width: 1000mm, 1250mm, 1550mm Maximum length: not more than 6000mm. Application: --> wall curtain, cladding and facade --> roof edges and parapet wall --> dado, separation wall and partition --> advertising plate, showroom and shop front signing --> column covers and beam wraps.
Material: Aluminum Port Size: 4 Layout: 2x2 Panel Size: 400x400mm Aluminum Entry Panels with 4 Ports Aluminum Entry Panel 2x2 Aluminum Entry Panels with 4 Ports Aluminum Entry Panel 2x2 Model: Aluminum Entry Panels with 4 Ports Description: Aluminum Entry Panel 2x2 Telsto Entry Panels runs feeder cable to enter buildings and shelters. These seals support the coax at the entry point and prevent moisture from entering the building. Each boot assembly must be fitted with a cushion to hold the coax in place. Entry plates are offered with a flexible selection of holes combination and plate sizes to match your exact application. Aluminum Entry Panels with 4 Ports Aluminum Entry Panel 2x2
2m width astm din ce standard b1 fireproof aluminum composite panl, b1 acp, b1 aluminum composite panel Fireproof aluminum composite panel specifications: 1) fireproof aluminum composite panel is composed of a fire-rated core between two aluminum sheets 2) coated with extra-durable pvdf/pe resin, a composite structure which features excellent characteristics (fireproof, waterproof, heat-insulated, sound-insulated and resistance against corrosion, pollution and wear) 3) panel thickness: A) 4mm (standard) B) 2 - 6mm available upon request. 4) aluminum skin thickness: A) 0.50 x 0.50mm B) 0.40 x 0.40mm C) 0.30 x 0.30mm 5) width: A) 1, 220mm (standard) 1250mm, 1500mm B) other widths available upon request. 6) length: A) 2, 440mm (standard) B) up to 6, 000mm (recommended). Fireproof aluminum composite panel features 1) super peeling strength. 2) excellent surface flatness and smoothness 3) superior weather, corrosion and pollutant resistance 4) even coating, various colors 5) fireproof, excellent heat and sound insulation 6) superior impact resistance 7) lightweight and easy to process. 8) easy to maintain. Fireproof aluminum composite panel applications 1) building exterior curtain walls 2) decoration and renovation additions for old buildings. 3) decoration of interior walls, ceilings, bathrooms, kitchens and balconies 4) shop door decoration 5) advertisement board display platforms and signboards 6) wallboards and ceilings for tunnels. 7) industrial materials, materials for vehicles and boats
There is a wide range of metal materials, metal grades, and metal specifications, will be your best choice. Thickness:0.03~50mm Width:=3000mm Length:strips sheets or according to customer requirements Material grade:al1085, 3003, 3004, 5052, 6063, 6061, 7005, 7075 etc Standard:astm, aisi, din, en, gb, jis Hardness grade:ann, 1/2h, 3/4h, h, fh, eh Hardness:hv18-160(aluminum) Surface glossiness: from 800 to 1400gu Finish grade:no.8 and super no.8 Mirror surface roughness:ra0.008-0.05 um Mirror color types:plain, rose gold, black, gray, dark green, or custom made Certification: sgs, its, bv, the third party Fabrication way:forming, slitting , cutting, polishing, , finishing, welding Application: high-end decoration, architectures, elevator, automotive, kitchen, furniture, electronic decoration, logo, reflection materials
The dimensions of cold forging heat sink, 1. Outside Diameter: as your request 2. Total Height: as your request 3. Base Thickness: as your request 4. Pin Height: as your request 5. Color: silver, gold, black, red, as your request GLARY has an extensive range of options to provide the optimal cooling solution for your LED application. Our precision forge process provides unique advantages for LED cooling. Forging can produce round and other non-linear shapes that are preferred for LED applications. The forge process uses high pressure to form the material and provides control over the grain structure to provide superior thermal performance. LED`s are generally convection cooled and our forged pin fin arrays provide the best possible thermal performance in ambient environments. Heat sinks can be forged in either aluminum or copper. Sizes range from 40 mm diameter to 350mm and shapes can be almost any shape you need. Standard or modified standard solutions We can provide a solution from our standard product line and model it to ensure that it will provide adequate cooling for your application. Custom design services Our engineers can also work with you to design and model a custom solution optimized to meet the needs of your application. Note: All machined parts are just for your reference, machined parts can not be provided to you, but the original design can be provided. The machined part is belong to the customer who provide the original machined design.
The dimensions of cold forging heat sink, 1. Outside Diameter: as your request 2. Total Height: as your request 3. Base Thickness: as your request 4. Pin Height: as your request 5. Color: silver, gold, black, red, as your request GLARY has an extensive range of options to provide the optimal cooling solution for your LED application. Our precision forge process provides unique advantages for LED cooling. Forging can produce round and other non-linear shapes that are preferred for LED applications. The forge process uses high pressure to form the material and provides control over the grain structure to provide superior thermal performance. LED`s are generally convection cooled and our forged pin fin arrays provide the best possible thermal performance in ambient environments. Heat sinks can be forged in either aluminum or copper. Sizes range from 40 mm diameter to 350mm and shapes can be almost any shape you need. Standard or modified standard solutions We can provide a solution from our standard product line and model it to ensure that it will provide adequate cooling for your application. Custom design services Our engineers can also work with you to design and model a custom solution optimized to meet the needs of your application. Note: All machined parts are just for your reference, machined parts can not be provided to you, but the original design can be provided. The machined part is belong to the customer who provide the original machined design.
Aluminum windows & doors.
Aluminum oxide.
Aluminum composite panel.
Solid phenolic core (SPC) panels, aluminum composite panel (ACP), handy router for ACP, handy grooving machine..
Aluminum composite panel.
Aluminum composite panel.
Aluminum composite panel.
