Triple-Anti self-defense functions : anti-losing, anti-stealing, anti-robbing Anti-losing effective distance :8~ 15 M Electric shock: high voltage pulse >30KV Alarm sound level>85db Stand-by duration: 7 days Continuous alarm/ shock duration: 2 hours Radio Frequency: 433/315 MHz Dimensions: 160*40* 25 mm Input charging voltage: AC90~240V. The batteries can be charged more than 500 times. Alarm electric shock box : 1pc Remote Controller : 1pc Operation manual : 1set Rechargeable battery & Charger : 1set
Methods of application: 1.Guard against lost:Dial the regulation and control button of the reveiver to maximum reception range,dial the power switch to anti-lost N-ON ,the cue tone tick of starting up will be sent out,subsequently the recever will send the cue tone tick..tick.. of waiting studying,now dial the sender supply switch to ON,and then the signal light of the sender will flicker and proceed to send signal,after the receiver signals from the sender,it will send out two cue tones tivk¡tick¡ to indicate successful studying of code.Note:if the receiver boots and sends out cue tones tick¡tick¡ to indicate successful study(while now the sender sxists in closedown state),pls check whether there is any other sender in use.After the sender starts up,if the recveiver still sends out the cue tone tick..tick¡ of waiting for the study,in this case it indicates the receiver hasn t receiver signals from the sender,pls check whether you dial the regulation and button to correct direction,whether the sender is in normal operation. 2.After successful study of the code, push the regulation and control button of destance to set the desirable distance if the protected object,generally the distance of articales such as luggage and walllets is set about 3 meters the distance of kids is relatively farther,pls set according to your own desire. 3.When the protected object walk out of the seting distance,the receiver alarms with one warning cue tone of the products,products wuth vibrating mark will vibrate as well as alarms. 4.Searching function dial power switch to search S-ON ,THEN THE RECEIVER WILL SEND OUT cue tone tick¡tick¡ of waiting for study,when the receiver receives the signals from sender,it sends out the cue tones tick¡tick to indicate approaching and vibrates(products with vibration function).it is convenient to find the protected object,if you walk out of the reception range,the receiver signal light will be on but no warning tone. 5.The sender should be put on the protect object,the receiver should be carries with yourself or the host. M-PJ-23 500pcs/carton Size:54.5X25.5X46CM 27KG/CTN.
Features: Surface-mounted, color TFT Screen with sensor buttons Color/contrast/brightness/volume adjustable Each indoor monitor can intercom, broadcast, and calling among each other Supports 2 Outdoor Units to work with 4 indoor monitors Each indoor monitor can monitor any one of the other 3 indoor monitors. Support visitor-calls transferable to telephone Support door released by telephone remotely or any indoor monitors Support image capture function 1024 images memory Support insert SD Card for saving captures images to computer for history record Support 4-Channel CCTV cameras fitted for security surveillance Support watch TV & Listen music function Applicable for Villa 4 wires twisted pair cables, simple star cable installation. Technical parameters: Display screen: color TFT Screen with sensor buttons Resolution: > 400 TV lines Scan frequency: 15,625Hz(H),50Hz(V) Power voltage: AC 110~220V 1200mA Video input: 75 1Vp-p Power consumption: 1.5w 12 w Wiring mode: 4 wires,polar Ambient temperature: -10oC~40oC.
Introduction: iClock2500 is an innovative biometric fingerprint reader for Time & Attendance applications, offering unparalleled performance using an advanced algorithm for reliability, precision and excellent matching speed. The iClock2500 features the fastest commercial-based fingerprint matching algorithm and high-performance, high-image quality optical fingerprint sensor. The 8 inch TFT can display more information vividly, including user photo, fingerprint image quality and verification result etc. 8 function keys are the shortcuts to change the attendance status, work-code or to browse the short message, and can be defined as required. TCP/IP communication is standard and make sure the data transmission between terminal and PC can be easily done within several seconds. The camera can capture the image of the user. Backup battery can provide more than three hours power supply when power input fails down. Features: Color TFT screen with GUI Interface for ease of use. High resolution camera Internal backup battery 1 touch a-second user recognition Stores 8,000 templates and 200,000 transactions Reads Fingerprint, PINs or ID card Optional integrated smart card reader Built-in Serial and Ethernet ports Built-in USB port allows for manual data transfer when network isn't available Optional integrated Wi-Fi\ GPRS also available. 8 user-defined function keys Multi Language Support Built in bell scheduling Real-time 1-touch data export 3rd party hosted & non-hosted applications Audio-Visual indications for acceptance and rejection of valid/invalid fingers SDK available for OEM customers and software developers Specifications: Fingerprint Capacity: 8000 templates Transaction Capacity: 200,000 Hardware Platform: ZEM600 Communication: RS232/485, TCP/IP, USB-host Camera: 300,000 pixels camera Standard Functions: Workcode, SMS, DLST, Scheduled-bell, Self-Service Query, Automatic Status Switch, T9 input, photo-ID, ID card, Backup Battery, web-server Optional FunctionsMifare/HID/iClass,9 digit user ID, Wi-Fi, GPRS, Printer, SOAP. Display: 8 inches TFT Screen Power Supply: 12V DC 1.5A Operating Temperature: 0 - 45 Operating Humidity: 20%-80% Dimension: 314.5X256.5X79 mm Gross Weight: 3.10 kg Dimensions:314.5*256.5*79mm weight:3.10kg packed individually in a carton box.
Introduction: FR302 multi-biometric identification time attendance and access control terminal adopts latest ZEM600 platform with Face 5.0 algorithm and large capacity memory. FR series integrated 630MHz high speed Multi-Bio processor and high definition infrared camera enables user identification in the dark environment. Face and fingerprint multi-biometric identification method will be applicable more widely. All operations of FR are designed to be performed on the 4.3 inches TFT touch screen. Multi-model communications includes RS232/485, TCP/IP, optional WiFi or GPRS. Optional built-in 2000 mAh battery eliminates the trouble of power-failure. Features: Identification methods include Face, Fingerprint/RFID and/or Password Elegant ergonomic design 4.3 TFT touch screen is user-friendly and very intuitive 6 user-defined function keys Contact relays for door access control (wires to door strike or 3rd party panel) Web-server management software via IE browser Optional extendable scheduled-bell Infra-red optical system enables user-identification in poorly lit environments Optional built-in battery backup provides approx 4 hours continuous operation. Optional built-in wireless Wi-Fi or GPRS for wireless communication Built-in contacts for 3rd party electric lock, door sensor, alarm, exit button, or bell. Wiegand Output for connections to 3rd party access control panels. Specifications: CPU: Multi-Bio CPU 630 MHz Memory: 256M Flash, 64M SDRAM Hardware Platform: ZEM600 Multi-Medium Development Platform Fingerprint Sensor: None Camera: High Resolution Infrared Camera Display: 4.3 TFT touch screen Face capacity: 700 Fingerprint capacity: 3000 Logs capacity: 100,000 2000mAh backup battery: Optional Communication: TCP/IP,RS232/485 USB-HOST: Two USB-Host Wireless Wi-Fi: Optional Time attendance Standard functions: ID Card(302 Optional), Automatic Status Switch, Self-Service Query, Work Code, T9 input, 9 digit user ID, DLST Access control interfaces for: 3rd party electric lock, door sensor, exit button Wiegand Signal: Output Optional functions: serial printer, Mifare card, Extendable Scheduled-bell, Short Massage, Web-server, GPRS Power supply: 12V3A Verification Speed: 2 sec Operating temp: 0- 45 Operating Humidity: 20%-80% Dimensions:193.6*146.8*111mm weight:1.65kg packed individually in a carton box.
System Model ¡¡DF- 8075DVR Wireless Min DVR ¡¡DF-DVR-1 Wireless Receiving ¡¡Built in 4 CH(2.414/2.432/2.450/2.468)GHz Wireless Receiver Wireless Receiving Sensitivity ¡¡¡Ü-80dBm Wired Video Input/Output ¡¡1.0VP-P,75OHm (RCA) Audio Input/Output ¡¡200-1000mv 5k(RCA) Audio Compression ¡¡PCM Color System ¡¡PAL/ NTSC (AUTO) OSD Menu Function ¡¡Set up: Image/ REC/ REC Mode/ Playback/ System Setting Video Compression ¡¡MPEG-4 Video Resolution ¡¡800x600/ 720x480/ 640x480/ 320x240 Video Frame ¡¡20 fps at 800x600;30fps at 720x480; 30fps 640x480;60fps at 320x240 Recording Mode ¡¡Manual,Video Detection(Including Motion Detection),Alarm Play Back ¡¡Full Screen Motion Detection ¡¡Zoom Setting,sensitivity setting Video Recording Quality ¡¡High/ middle/ low Saving Capacity ¡¡Suport One SD Card (256M to 32GB) Operating Voltage ¡¡DC 6.5~32V/4W Operation Temperature ¡¡-20¡æ¡«+70¡æ Storage Temperature ¡¡-40¡æ¡«+80¡æ RH95% Max External Dimension ¡¡D*W*D(108*100*28)mm Weight Approx ¡¡300g. Wireless Camera ¡¡DF-8075FS Wireless Transmitting ¡¡Built in 2.4GHz Wireless Transmitter Transmission Power ¡¡10mW/CE; 2mW/FCC Image Type ¡¡1/3" Color CMD Horizontal Resolution: ¡¡480TV Lines Usable Illumination ¡¡0Lux (18 pcs LEDs for night vision) Viewing Angle ¡¡130 ¡ã Waterproof of Grade ¡¡IP68 Shockproof ¡¡10G Operation Temperature ¡¡-10¡ãC to+70¡ãC Storage Temperature ¡¡-30¡ãC~+80¡ãC Operating Voltage ¡¡DC 12V/4W Accessories User Manual,Full Function Remote Controller,Power . External Dimensions 69(W) x 43(H) x 38(D) (without mounting) Weight Approx ¡¡280g .
WH_1M3GGS(1.3Megapixel) is a GSM/GPRS enabled IR camera that can be located anywhere in the world with GSM coverage to deliver full colour JPEG images from remote locations by FTP, email post to your own custom server. There exists a Central Management System to manage up to three thousand front GSM IP cameras and ten customer consoles to access on line the same time. There are three ways to trigger the camera to take picture: On demand, motion detection and schedule. It has higher stability and scalable architecture as it adopts the double-CPU system: One for Image process as well as system controlling and the other for GSM/GPRS Product Feature: WH_1M3GGS Its main features are as belowing: 1. There exists a Central Management System to manage up to three thousand front IP cameras and ten customer consoles to access on line the same time. 2. Up to 1.3M(1280x1024) pixel Image resolution. 3. Store and forward function. When the GSM/GPRS network temporary is not available, the pictures will be stored in the camera and then be forwarded to the center server when the GSM network is available. 4. GSM/GPRS Mobile Network, build in GSM/GPRS modem (SIM slot) with external antenna. 5. Two-way speaking. The center server can initialize the voice speaking. 6. Several modes power supplier: Main power supply and backup battery supply. Once the failure of the main power, the backup battery will act on. Solar panel is optional. 7. Multi communction ways(MMS, Email, FTP, smart and scalable integrated PC software). 8. Various image formats (2560x1920, 2048x1536, 1600x1200, 1280x960, 640x480, 320x240 is optional). 9. Picture trigged by several ways: A. On schedule time B. On demand from user C. Signal from one of the sensors and etc. 10. Up to 32 GB SD/SDHC card local storage. 11. Night vision: Infrared LEDs, effective range up to 20Meters, enables the camera to capture images in dark environment. 12. Watchdog built-in assure its stability. Product Specification/Models: Camera Image Sensor 1/3" Progressive Scan CMOS Min. Illumination Color: 0.6Lux F1.2 B / W: 0.08Lux F1.2 Electronic Shutter 1/25s~1/100,000s Lens Mount CS Media Compression Standard: Picture Compression JPEG Video Compression H.264/ MPEG-4 Audio Compression OggVorbis Bit rate 32 Kbps~16Mbps Image: Max. Image Resolution 1280x1024 Frame Rate 15fps(1280x1024) Video Parameter Saturation, Brightness, Contrast adjustable through client software or web browser Network Protocol: Protocols TCP/IP, HTTP, FTP, DHCP, DNS, DDNS, RTP/RTSP, PPPoE, SMTP, NTP GSM/GPRS/3G Network: Frequency bands GSM/GPRS: 1900/1800/900/850MHz Data rate GPRS---UL: 53.6 kbps/DL: 53.6 kbps CSD--- 9.6kbps Interface: Intelligent Alarm Motion Detection, Network Disconnect, Storage exception Alarm Input 1 channel Alarm Output 1 channel Local Storage Support SD/SDHC Basics Reset button, Anti-flicker, Heartbeat, Password Protection General: Operating Condition -10degree~60degree Humidity 90% or less Power Supply DC12V Power Consumption 4W MAX Optional: Ethernet Interface 1 RJ45 10M / 100M self-adaptive. PoE is optional. Other powering Solar and Battery powering is optional GPS GPS is optional Application: 1. Geology and forestry monitoring rockslides, floods, fires, wildlife and vandalism 2. Transformer station surveillance 3. Construction site monitoring working progress and valuable equipment 4. Ferryboats, dredges and other marine acquiring the pictures you require from the vessel 5. Oil and gas pipelines surveillance 6. Power station surveillance 7. GSM BS Surveillance 8. Home surveillance 9. Traffic control
WH_0M3GGS(0.3Megapixel) is a GSM/GPRS enabled IR camera that can be located anywhere in the world with GSM coverage to deliver full color JPEG images from remote locations by FTP, email post to your own custom server. There exists a Central Management System to manage up to three thousand front GSM IP cameras and ten customer consoles to access on line the same time. There are three ways to trigger the camera to take picture: On demand, motion detection and schedule. It has higher stability and scalable architecture as it adopts the double-CPU system: One for Image process as well as system controlling and the other for GSM/GPRS. Product Feature: WH_0M3GGS Its main features are as bellowing: 1. There exists a Central Management System to manage up to three thousand front IP cameras and ten customer consoles to access on line the same time. 2. VGA(640x480)Pixels Image resolution 3. Store and forward function. When the GSM/GPRS network temporary is not available, the pictures will be stored in the camera and then be forwarded to the center server when the GSM network is available. 4. GSM/GPRS Mobile Network, build in GSM/GPRS modem (SIM slot) with external antenna 5. Two-way speaking. The center server can initialize the voice speaking. 6. Several modes power supplier: Main power supply and backup battery supply. Once the failure of the main power, the backup battery will act on. Solar panel is optional 7. Multi communication ways(MMS, Email, FTP, smart and scalable integrated PC software) 8. Various image formats (2560x1920, 2048x1536, 1600x1200, 1280x960, 640x480, 320x240 is optional) 9. Picture trigged by several ways: A. On schedule time B. On demand from user C. Signal from one of the sensors and etc. 10. Up to 32 GB SD/SDHC card local storage. 11. Night vision: Infrared LEDs, effective range up to 20Meters, enables the camera to capture images in dark environment. 12. Watchdog built-in assure its stability. Product Specification/Models: Camera Image Sensor 1/4" Progressive CMOS Min. Illumination Color: 0.2Lux F1.2 B / W: 0.02Lux F1.2 Electronic Shutter 1/25s~1/100,000s Lens Mount CS Compression Standard: Picture Compression JPEG Video Compression H.264/ MPEG-4 Audio Compression OggVorbis Bit rate 32 Kbps~16Mbps Image: Max. Image Resolution 640x480 Frame Rate 50HZ: 25fps (640x480) 60HZ: 30fps (640x480) Video Parameter Saturation, Brightness, Contrast adjustable through client software or web browser Network Protocol: Protocols TCP/IP, HTTP, FTP, DHCP, DNS, DDNS, RTP/RTSP, PPPoE, SMTP, NTP GSM/GPRS/3G Network: Frequency bands GSM/GPRS: 1900/1800/900/850MHz Data rate GPRS---UL: 53.6 kbps/DL: 53.6 kbps CSD--- 9.6kbps Interface: Intelligent Alarm Motion Detection, Network Disconnect, Storage exception Alarm Input 1 channel Alarm Output 1 channel Local Storage Support SD/SDHC Basics Reset button, Anti-flicker, Heartbeat, Password Protection General: Operating Condition -10degree~60degree Humidity 90% or less Power Supply DC12V Power Consumption 4W MAX Optional: Ethernet Interface 1 RJ45 10M / 100M self-adaptive. PoE is optional. Other powering Solar and Battery powering is optional GPS GPS is optional Application: 1. Geology and forestry monitoring rockslides, floods, fires, wildlife and vandalism 2. Transformer station surveillance 3. Construction site monitoring working progress and valuable equipment 4. Ferryboats, dredges and other marine acquiring the pictures you require from the vessel 5. Oil and gas pipelines surveillance 6. Power station surveillance 7. GSM BS Surveillance 8. Home surveillance 9. Traffic control
Frequency: 58KHZ Size: 45.21*10.67*1.89mm Color: black or white Surface: blank Custom's logo are welcome. Packing: carton,108pcs/sheet,46sheets and 36pcs/ctn, (5000pcs/ctn),28.5*20*11.8cm,0.007cbm G.W: 2.8KG N.W: 2.5KG.
1) Supply one stanchion with belt as as a unit. 2) Suitable for organization, information and protection inpublic places, can print logo or indurstry mark on the belt. 3) Materials: Sprayed iron4) Round flat base 4) Colors: Gold, silver, black, blue 5) Belt available: Vinyl 6) Belt colors: Red, white, blue and yellow 7) Length: 200cm or any other length upon requests 8) Dia. 320mmxH915mm/Tube: Dia51mm 9) Material thickness: 0.8mm 10) Weight: 8kg/PCS. 2sets in a standard export carton and wooden enternal packing. 2sets in a standard export carton and wooden enternal packing. 80*800*1000mm.
1) Supply one stanchion with belt as as a unit. 2) Suitable for organization, information and protection inpublic places, can print logo or indurstry mark on the belt. 3) Materials: Sprayed iron4) Round flat base 4) Colors: Gold, silver, black, blue 5) Belt available: Vinyl 6) Belt colors: Red, white, blue and yellow 7) Length: 200cm or any other length upon requests 8) Dia. 320mmxH915mm/Tube: Dia51mm 9) Material thickness: 0.8mm 10) Weight: 8kg/PCS. 2sets in a standard export carton and wooden enternal packing. 2sets in a standard export carton and wooden enternal packing.80*800*1000mm.
Functions and features: 1. Unique incomplete wheel transmission is adopted to make turnstiles held or unheld in zero position more accurate and reliable. 2. Running stable, little noise and no mechanical impact 3. Self-checking-power-on function, if power on,turnstile will auto get to be held. 4. Various working means can be set in the control panel menu, namely: bi-direction card reading passing, or one direction card reading passing and another passing limits, or one direction card reading passing and another free passing, etc. 5. If power off, arm will fall automatically while power on later, arm should be lift by hand. First press the arm with a little force and then lift it manually. 6. It is with RS485 connection for far control arm up and down to satisfy the special needs or fire control requirements. 7.It is with standard electrical interface to connect various kinds of readers and writers for easy integration and also computer far control and management can be realized by computer. 8. It will count the persons who have been passed through automatically and will show the number by LED directly.(LED is optional) 9. Passing direction will be shown by LED and passengers will know which direction is allowed to pass. 10. Card reading memory or card reading without memory function can be set in the control panel menu according to your request. 11. If working with software, the total-in-population can be set to satisfy special request. 12. Re-position function. After card reading, if passenger not through within the specific time, time and the limit passing time length can be set. 13. Card Mouting is avaliable. 14. Uncompleted wheel turning system is adopted for locking the turnstile in zero, and unlocking will be more reliable and accurate. 15. Optional: 1) Counter and counter display 2) Access controller or card reader. 3) Key by-pass. Wooden case.
1. Works as a USB drive (no driver needed) 2. Color video recording 3. Length Size: 15 cm, Diameter: 1.5 cm 4. Format: AVI video format, 640 x 480 pixels 5. Internal Memory: 1GB 6. Video file size: >500KB per min 7. Recording mode :continuous recording until memory is full or manually off 8. Adaptor type: USB adaptor charging cable 9. Built-in rechargeable Battery type : Lithium-ion 10. Record time : up to 5 hours 11. Battery use time : about 3 hours 12. Comes with USB cable and Battery Charger.
The walkthrough metal detectors Packing ctsn 2 ctns/set.
Detailed Info: DL700E+ offers outstanding image quality and temperature measurement performance in an affordable, rugged and easy to use infrared camera. It works as a professional tool effective in different applications such as power plant, petro chemicals, scientific research, fire fighting, and building inspection, metallurgy, etc. *Detector type: Uncooled FPA microbolometer *Array size/format:384¡Á288 *Field of view/min focus distance:16¡ã¡Á12¡ã/0.5m *Spatial resolutions(IFOV):0.88mrad *Thermal sensitivity :¡Ü0.06¡ãC@30¡ãC *Frame rate:50/60HZ *Focus: Auto/Electronic focus *Electronic zoom:1~8X continuous *Spectral range:8~14¦Ìm *Built-in visual camera:300,000 pixels, Pic. in Pic. or full *Viewfinder: Built-in high-resolution color LCD *LCD:High-resolution color LCD, 640¡Á480 *Temperature ranges:-20¡ãC~+500¡ãC,optional up to +1200¡ãC or +2000¡ãC *Accuracy:¡À2¡ãC or ¡À2% of reading, whichever is greater *Measurement correction: Automatic/Manual *Measurement mode:Up to 10 movable spots. Up to 5 movable areas(maximum, minimum and average temperatures).Line profile. Isotherm. Temperature difference.Alarm(voice,color) *Color palette:9 palettes changeable(Iron,rainbow,Grey and Grey inverted,etc.) *Image adjustment: Auto/Manual gain and brightness *Setup functions: Date/time, temperature unit, language *Emissivity correction: Variable from 0.01 to 1.0 or select from listings in pre-defined material list *Ambient temperature correction: Automatic correction according to user input *Atmospheric transmission correction: Automatic correction according to user input object distance, relative humidity, ambient temperature *Storage Card :Built-in flash memory, CF card(2G),Up to 5000 images* *Storage mode: Autmatic/Manual single image saving *File format-thermal:JPEG,14 bit thermal image with measurement data *Voice annotation :Input via built-in microphone Up to 40 seconds of digital voice per image stored with image** *Image improvenment: Averaging(S2,S4,S8,S16),Spatial filter *Laser pointer: Class 2,1mw/635nm(red) *Battery type: Li-Ion,rechargeable* *Battery operating time:2 hours continuous operation *Charging system: Intelligent charger or power supply adaptor(optional) online charge *Power saving:YES *External power:10~15V DC* *Operating temperature:-15¡ãC~+50¡ãC *Humidity:¡Ü90% non-condensing *Encapsulation:IP54 *Weight:1.69Kg *Dimensious:305mm¡Á130mm¡Á135mm *External DC input: Yes *Audio output: Yes *Video output: PAL/NTSC/VGA *USB: Image(thermal and visual),measurement data and voice transfer to PC.
Detailed Info: DM60 is an online condition monitoring infrared thermal imaging camera developed with new generation uncooled FPA detector. With high thermal sensitivity, clear IR image, accurate temperature and easy operation, DM60 is suitable for a wide variety of applications of process condition non-contact temperature measure, quick Fault Diagnosis and heat field analysis in field of industry, electricity, electronic condition state detection. *Detector type uncooled FPA microbolometer *Array size/format:160¡Á120/384¡Á288 *Field of view/min focus distance: 18¡ã¡Á13¡ã/0.3m/16¡ã¡Á12¡ã/0.5m *Spatial resolution(IFOV): 1.9mrad/0.88mrad *Thermal sensitivity: 0.1¡ãC@30¡ãC/0.06¡ãC@30¡ãC *Frame rate: 50/60Hz *Focus: Manual/auto&manual *Spectral range: 8-14um *Temperature ranges: -20¡ãC-+350¡ãC, extended to +600¡ãC/-20¡ãC-+500¡ãC, *Accuracy: ¡À 2 ¡ãC or ¡À 2% of reading, Whichever is greater *Measurement correction: Automatic/manual *Measurement mode: 4 Movable spot. 3 Movable area (maximum, minimum and average temperatures). Isotherm. Alarm(voice, color) *Color palette: 11 palettes changeable(Iron, Rainbow and Grey ) *Image adjustment: Auto/manual gain and brightness *Setup functions: Date/time, temperature unit, language, IP address *Raw image capture:Single frame raw image manual captured via client control software,the captured images are analyzable *Image storage:MPEG-4 images storage, single image capture,BMP *Emissivity correction: Variable from 0.01 to 1.0 *Ambient temperature correction: Automatic correction according to user input *File format: File format-thermal JPEG, 14 bit thermal image with measurement data *Laser pointer: Class 2, 1mw/635nm(red) *Battery type: Li-Ion, rechargeable *Battery operating time: 3 hours continuous operation *Charging system: Intelligent charger *Power saving: YES *Operating temperature: -15¡ãC-+50¡ãC *Humidity:
Description: 384¡Á288 uncooled FPA detector Hand held, Image storage Easy operation Strong environment adaptability S260 system perfects on-line security application under different weather condition, including detecting hidden danger, rescue, suppress smuggling, search as well fire protection and etc. Long time recording for , playback and analyse easily at any time Auto focus according to the objective scene Multi-point control at the same time streaming media forwarding Recording for long time, and playback and analyse easy Motion and alarm record Multiple video channel combined output Data backup at any time IE browsing£¬PTZ controlling with network Powerful alarm linkage function supplied: Lose-shift object detection, property Lost alarm, motion path identification, population unusual, behavior recognition, object statistics counts. Detailed Info: *Detector type: uncooled FPA microbolometer *Array size/format:160¡Á120/384¡Á288 *Field of view/min focus distance: 6.4¡ã¡Á4.8¡ã/1m/13.7¡ã¡Á10.3¡ã/1m *Spatial resolution(IFOV): 0.69mrad/0.63mrad *Thermal sensitivity: 0.1¡ãC@30¡ãC/0.08¡ãC@30¡ãC *Frame rate: 50Hz *Focus: Manual/auto&manual, auto focus according to the object scene *Spectral range: 8-14um *Brightness / gain adjustment: Manual adjust brightness/gain, automatic adjust brightness *Automatic adjust brightness/gain mode: 2 fixed modes, 8 user-defined modesl *Image polarity: hot black / hot white *Electronic zoom: 2x *Image enhancement: yes , Noise Reduction: yes *Calibration: Auto/manualCrosshair: on/off *Crosshair: on/off *Operating temperature: -20¡ãC-+50¡ãC *Humidity:
*Detector type uncooled FPA microbolometer *Array size/format:160¡Á120 *Field of view/min focus distance: 12¡ã¡Á9¡ã/0.3m *Spatial resolution(IFOV): 1.3mrad *Thermal sensitivity: 0.12¡ãC@30¡ãC *Frame rate: 50Hz *Focus: Manual *Spectral range: 8-14um *LCD: Built-in high-resolution color 2.5¡± LCD *Temperature ranges: -20¡ãC-+250¡ãC *Accuracy: ¡À 2 ¡ãC or ¡À 2% of reading, Whichever is greater *Measurement correction: Automatic/manual *Measurement mode: Movable spot. Movable area (maximum, minimum and average temperatures). Isotherm. Alarm(voice, color) *Color palette: 3 palettes changeable(Iron, Rainbow and Grey ) *Image adjustment: Auto/manual gain and brightness *Setup functions: Date/time, temperature unit, language *Emissivity correction: Variable from 0.01 to 1.0 *Ambient temperature correction: Automatic correction according to user input *Storage card: Built-in flash memory, Up to 100 images *Storage mode: Manual single image saving *File format: File format-thermal JPEG, 14 bit thermal image with measurement data *Laser pointer: Class 2, 1mw/635nm(red) *Battery type: Li-Ion, rechargeable *Battery operating time: 3 hours continuous operation *Charging system: Intelligent charger *Power saving: YES *Operating temperature: -15¡ãC-+50¡ãC *Humidity:
1. GM8180 chipset; 2. Realtime: 25fps/CH, total 100fps (PAL), 120fps (NTSC) 3. Video input: 4CH / output: 1CH 4. Audio input: 2CH /output: 1CH 5. Support network remote, USB backup, USB upgrade 6. Pentaplex, support 1, 2, 4CH playback simultaneously 7. Recording bit/frame adjustable 8. Support PTZ, Alarm 9. Support 1PC 1000G SATA HDD 10. Size 435 x 63 x 360mm, weight 5.5KG. 1. Size 435 x 63 x 360mm 2. Weight 5.5KG.
Image Sensor: CMOS View Angle:60 degrees Recording Resolution:640*480 Recording Frame:30 FPS Video Format: AVI Video File Size:850KB/second Video Recording Section:50 minutes/section, automatically USB Interface:USB 2.0 Memory: No flash built-in. Support micro SD card up to 16GB Battery Working Time: Up to 3.5 hours Battery Charging Time: Around 2 hours Color: Black. Dimension:9.5*2.8*2.8 cm. Weight:64 grams.
