Shenzhen Aermo Electronic Technology Co., Ltd.

Methods of application: 1.Guard against lost:Dial the regulation and control button of the reveiver to maximum reception range,dial the power switch to anti-lost N-ON ,the cue tone tick of starting up will be sent out,subsequently the recever will send the cue tone tick..tick.. of waiting studying,now dial the sender supply switch to ON,and then the signal light of the sender will flicker and proceed to send signal,after the receiver signals from the sender,it will send out two cue tones tivk¡­tick¡­ to indicate successful studying of code.Note:if the receiver boots and sends out cue tones tick¡­tick¡­ to indicate successful study(while now the sender sxists in closedown state),pls check whether there is any other sender in use.After the sender starts up,if the recveiver still sends out the cue tone tick..tick¡­ of waiting for the study,in this case it indicates the receiver hasn t receiver signals from the sender,pls check whether you dial the regulation and button to correct direction,whether the sender is in normal operation. 2.After successful study of the code, push the regulation and control button of destance to set the desirable distance if the protected object,generally the distance of articales such as luggage and walllets is set about 3 meters the distance of kids is relatively farther,pls set according to your own desire. 3.When the protected object walk out of the seting distance,the receiver alarms with one warning cue tone of the products,products wuth vibrating mark will vibrate as well as alarms. 4.Searching function dial power switch to search S-ON ,THEN THE RECEIVER WILL SEND OUT cue tone tick¡­tick¡­ of waiting for study,when the receiver receives the signals from sender,it sends out the cue tones tick¡­tick to indicate approaching and vibrates(products with vibration function).it is convenient to find the protected object,if you walk out of the reception range,the receiver signal light will be on but no warning tone. 5.The sender should be put on the protect object,the receiver should be carries with yourself or the host. M-PJ-23 500pcs/carton Size:54.5X25.5X46CM 27KG/CTN.

Product Description 1. Stand alarm volume: 88db at a distance of 10 cm 2.It is mainly suitable for some pilot stores with low risks of theft. It does not support clamp. There is no internal cable for the stand. 3.Safe zone limit:1.5 0.5M

Strobe siren Item no.:wp-06 Size:200(l)*112(w)*70(h)mm Voltage:dc 12v Current:350ma Sound:hi-lo Db/m:100f+3db Flash freq.:60/min Flash color:red/blue/orange Package:24pcs/ctn Carton size:45.5*25*44cm

Features: 1,TCP/IP/WIFI network dlink IP camera smart home security alarm system. 2,Remote control by APP for IOS &Android. 3,Coding with wireless alarm sensors ,such as PIR sensor, Door sensor, smoke detectors to protect your house. 4,Remote monitoring by phone, ipad or PC. 5,Alarm mode: calling, email or video monitor. Descriptions: The security surveillance cameras smart home security alarm system can offer you the freedom to get your home and business surveillance via LAN or Internet remotely. You can view by the Microsoft IE browser directly. TCP/IP camera smart home alarm system comes with alarm function, when somebody appears on the camera under Motion detection, it will take pictures and email to you immediately. Now CCTV smart camera security alarm system has been used in various places, such as warehouse, office, supermarket, doorkeeper etc. Get the security surveillance for your home and business, to enjoy the fun to view what happened freely! The smart camera can also work with wireless smoke detectors, gas detectors, PIR sensors, magnetic door sensors and other wireless detectors, if there is an urgent alarm by any detectors, the camera will send alarm information to you via calling, SMS, email and take picture at the same time.

1.1 x relay outputs DC12V 2.with External camera, Support motion detecting which can capture thief's photo. Support motion detecting which can capture thief's photo. 3.4 wired zones and 40 wireless zones. 4.Can program open/closed alarm of digital inputs. 5.Working frequency between detector and alarm host(315M/433M optional) 6.Digital inputs are adopted cal-coupled isolators, which can prevent external high voltage from destroying internal. 7.Set 5 phone numbers by digital keypad. 8.arm/disarm by control keyboard on the mainframe & phone & SMS & Remote controller. 9.SMS of each zone content can be edited independently(English or other language:140 characters) 11.Call 5 phones automatically while alarming and drive wiretap, can clearly hear the voice on the scene. 12.record function: Maximum recording time:1 minute 13.voice function:support play the user record voice. 14.support Mic and interphone. 15.Prompt for whole operation guidance, automatic prompt for host status and alarm by SMS 16.Modify zone inquire status of alarm host by SMS demand. 17.with magnetic Antenna with strong signal 18.Low or High alert levels programmable by user 19.with standby rechargeable battery. The host automatically stores system status, while its power is off. 20.Adopts wireless signal transmission, no need to connect to wire and easy for installation. 21.tamper device: Arming while the control panel removing or shaking. 22.Connect with alarm Centre through GSM network.

Product categories of Sensor Type of Fire Alarm, we are specialized manufacturers Sensor Type Of Fire Alarm, Sensor Type Fire Alarm suppliers/factory, wholesale high-quality products of Fire Alarm Sensor Type R & D and manufacturing, we have the perfect after-sales service and technical support. Look forward to your cooperation Here you can find the related products in Sensor Type of Fire Alarm, we are professional manufacturer of Sensor Type Of Fire Alarm,Sensor Type Fire Alarm,Fire Alarm Sensor Type,Fire Alarm. We focused on international export product development, production and sales. We have improved quality control processes of Sensor Type of Fire Alarm to ensure each export qualified product. If you want to know more about the products in Sensor Type of Fire Alarm, please click the product details to view parameters, models, pictures, prices and other information about Sensor Type Of Fire Alarm,Sensor Type Fire Alarm,Fire Alarm Sensor Type,Fire Alarm. Whatever you are a group or individual, we will do our best to provide you with accurate and comprehensive message about Sensor Type of Fire Alarm

Description The security display holder is widely use in trade fair, exhibition or retail store to prevent camera from stealing. it allows customers to try on any wearable and explore all the functions without store staff assistance. Business Terms Accepted Delivery Terms: FOB Accepted Payment Currency: USD Accepted Payment Terms: T/T, L/C, PayPal, Western Union, Escrow Near Port: Shenzhen

GSM 850/900/1800/1900MHZ for Global use. With 2 wired zones for connecting wired sensors Full touch keys, beautiful shape, external connect entrance guard SMS 5 phones automatically while alarming and drive wiretap. Call 5 phones automatically while alarming and drive wiretap, Can clearly hear the voice. Auto-dial 1 preset phone numbers of Alarm Center Alarm panel with LCD display & keypad, easy to operate. SMS alert & auto-dial alert when AC Power outage, AC power recovered with standby rechargeable battery. The host automatically stores system status, while its power is off. With wired MIC interface, switching the sound off and siren Talkback Function: can speak with field person. Support 7 kinds arm/disarm mode: remote/Mainframe keyboard/sms/remote call/ timing arm and disarm / alarm center software/APP mobile phone Delay alarm function(0-90 optional) Arming timing function(0-90 optional) wireless transmission control 8 road electric switch Timing arm/disarm function. record function: Maximum recording time:20S voice function:support play the user record voice. Built-in high standard Internal Antenna with strong signal original host operating system. Chinese/English switch supported with ROHS/CE/FCC certifications,conform to 3C Safety Standard and GB12663-2001 government standard