Continuous operating mixing machine Sandychen: Function Mixing is one of the important parts in rubber product processing. So far, the most common technologies have been used are open mill mixing and internal mixer mixing, which are called non-continuous mixing. , we have designed the "screw mixing machine" in continuous leveling method and of high efficiency with the strong points as follow: It is efficient as it works long; It does not result in power wasting as there is no idle-running; It does not result in any working environmental impacts as the the transaction in the sealed main body of the machine; It reduces the cost and increase the profit in operation as less power and fewer workers are required compared to those for open mill or for internal mixer. it takes low labor intensity as there is only one worker needed in material feeding on the conveyor and qualified product is processed automatically. It is a new type of mixing machine which is highly recommended in rubber product processing.
Continuous operating mixing machine Function Mixing is one of the important parts in rubber product processing. So far, the most common technologies have been used are open mill mixing and internal mixer mixing, which are called non-continuous mixing. , we have designed the "screw mixing machine" in continuous leveling method and of high efficiency with the strong points as follow: It is efficient as it works long; It does not result in power wasting as there is no idle-running; It does not result in any working environmental impacts as the the transaction in the sealed main body of the machine; It reduces the cost and increase the profit in operation as less power and fewer workers are required compared to those for open mill or for internal mixer. It takes low labor intensity as there is only one worker needed in material feeding on the conveyor and qualified product is processed automatically. It is a new type of mixing machine which is highly recommended in rubber product processing.
Continuous Operating Mixing Machine Function Mixing is one of the important parts in rubber product processing. So far, the most common technologies have been used are open mill mixing and internal mixer mixing, which are called non-continuous mixing. , We have designed the "screw mixing machine" in continuous leveling method and of high efficiency with the strong points as follow: It is efficient as it works long; It does not result in power wasting as there is no idle-running; It does not result in any working environmental impacts as the the transaction in the sealed main body of the machine; It reduces the cost and increase the profit in operation as less power and fewer workers are required compared to those for open mill or for internal mixer. It takes low labor intensity as there is only one worker needed in material feeding on the conveyor and qualified product is processed automatically. It is a new type of mixing machine which is highly recommended in rubber product processing.
Continuous Operating Mixing Machine Function Mixing is one of the important parts in rubber product processing. So far, the most common technologies have been used are open mill mixing and internal mixer mixing, which are called non-continuous mixing. , We have designed the "screw mixing machine" in continuous leveling method and of high efficiency with the strong points as follow: It is efficient as it works long; It does not result in power wasting as there is no idle-running; It does not result in any working environmental impacts as the the transaction in the sealed main body of the machine; It reduces the cost and increase the profit in operation as less power and fewer workers are required compared to those for open mill or for internal mixer. It takes low labor intensity as there is only one worker needed in material feeding on the conveyor and qualified product is processed automatically. It is a new type of mixing machine which is highly recommended in rubber product processing.
Continuous Operating Mixing Machine Function Mixing is one of the important parts in rubber product processing. So far, the most common technologies have been used are open mill mixing and internal mixer mixing, which are called non-continuous mixing. , We have designed the "screw mixing machine" in continuous leveling method and of high efficiency with the strong points as follow: It is efficient as it works long; It does not result in power wasting as there is no idle-running; It does not result in any working environmental impacts as the the transaction in the sealed main body of the machine; It reduces the cost and increase the profit in operation as less power and fewer workers are required compared to those for open mill or for internal mixer. It takes low labor intensity as there is only one worker needed in material feeding on the conveyor and qualified product is processed automatically. It is a new type of mixing machine which is highly recommended in rubber product processing.
Continuous Operating Mixing Machine Function Mixing is one of the important parts in rubber product processing. So far, the most common technologies have been used are open mill mixing and internal mixer mixing, which are called non-continuous mixing. , We have designed the "screw mixing machine" in continuous leveling method and of high efficiency with the strong points as follow: It is efficient as it works long; It does not result in power wasting as there is no idle-running; It does not result in any working environmental impacts as the the transaction in the sealed main body of the machine; It reduces the cost and increase the profit in operation as less power and fewer workers are required compared to those for open mill or for internal mixer. It takes low labor intensity as there is only one worker needed in material feeding on the conveyor and qualified product is processed automatically. It is a new type of mixing machine which is highly recommended in rubber product processing.
Continuous Operating Mixing Machine Function Mixing is one of the important parts in rubber product processing. So far, the most common technologies have been used are open mill mixing and internal mixer mixing, which are called non-continuous mixing. , We have designed the "screw mixing machine" in continuous leveling method and of high efficiency with the strong points as follow: It is efficient as it works long; It does not result in power wasting as there is no idle-running. It does not result in any working environmental impacts as the the transaction in the sealed main body of the machine; It reduces the cost and increase the profit in operation as less power and fewer workers are required compared to those for open mill or for internal mixer. It takes low labor intensity as there is only one worker needed in material feeding on the conveyor and qualified product is processed automatically. It is a new type of mixing machine which is highly recommended in rubber product processing.
Continuous Operating Mixing Machine Function Mixing is one of the important parts in rubber product processing. So far, the most common technologies have been used are open mill mixing and internal mixer mixing, which are called non-continuous mixing. , We have designed the "screw mixing machine" in continuous leveling method and of high efficiency with the strong points as follow: It is efficient as it works long. It does not result in power wasting as there is no idle-running; It does not result in any working environmental impacts as the the transaction in the sealed main body of the machine; It reduces the cost and increase the profit in operation as less power and fewer workers are required compared to those for open mill or for internal mixer. It takes low labor intensity as there is only one worker needed in material feeding on the conveyor and qualified product is processed automatically. It is a new type of mixing machine which is highly recommended in rubber product processing.
Continuous Operating Mixing Machine Function Mixing is one of the important parts in rubber product processing. So far, the most common technologies have been used are open mill mixing and internal mixer mixing, which are called non-continuous mixing. , We have designed the "screw mixing machine" in continuous leveling method and of high efficiency with the strong points as follow: It is efficient as it works long; It does not result in power wasting as there is no idle-running; It does not result in any working environmental impacts as the the transaction in the sealed main body of the machine; It reduces the cost and increase the profit in operation as less power and fewer workers are required compared to those for open mill or for internal mixer. It takes low labor intensity as there is only one worker needed in material feeding on the conveyor and qualified product is processed automatically. It is a new type of mixing machine which is highly recommended in rubber product processing.
Rubber Trimming Machine Introduction Frozen Shot Trimming an offshoot of cryogenic deflashing uses a system whereby parts are placed in a chamber, exposed to extremely cold temperatures (achieved with the use of liquid nitrogen) and then tumbled and blasted with a polycarbonate media. Because the burrs have a high surface area relative to their mass, they freeze very quickly and become brittle. The tumbling action combined with the impact of the media removes the burrs without damaging the part itself. Application Rubber NR NBR HNBR CR EPDM FKM ACM SILICONE Precision Plastic PA + GF PC + GF PPS POM PU PBT PTFE PEEK TPU TPE TPR Die - casting Alloy ZINC ALLOY MAG ALLOY Small and Round shape without sharp points will be more suitable for the Frozen Shot Trimming. SPECIFICATIONS NS - 60T Size: L1160mm * W1100mm * H2155mm Weight: 800kg Power Supply: AC380V 50HZ Electrical Capacity: 5KW * 3PH Design Temp: - 130Deg. C Design Pressure: 0.5 - 0.7 Mpa Outer Wall Material: SUS Frame Material: 100% SUS304 Barrel Capacity: 60L Wheel Speed: 7,200 rpm Max Barrel Speed: 0 - 26rpm Media Throw wheel Size : 250 Operation Mode: Touch Panel
Company Introduction Showtan Techno - Machine Nanjing Co. , Ltd. , the largest and most well - known manufacture of cryogenic deflashing machine in China, is a subsidiary company of a well - known Japanese cryogenic deflashing machine and gas products manufacture - Showa Denko Gas Products Co. , Ltd. , which is a member of the world famous multinational and comprehensive group - Showa Denko Group from Japan. Automatic Deburring Machine Introduction Automatic deburring is a process for removing flash from molded rubber parts. We use liquid nitrogen, high - speed rotation and shot blasted plastic media in varying combinations to remove the flash in a highly precise, economical and expedient manner. Parts that have thin flash can be quickly and thoroughly cryogenically deflashed. This process is exceptionally good at removing the inner dimensional and complex flash that cannot be removed by any other method. Application O - rings, gaskets and other rubber sealings Insulators and other electric / electronic components Valve stems, washers and fittings Short tubes and flexible boots Rubber absorbers and bumpers for automobile Face masks & goggles Mobile phone housing and intelligent watch strap Zinc and mag alloys like door lockers for auto cars SPECIFICATIONS NS - 60T Size: L1160mm * W1100mm * H2155mm Weight: 800kg Power Supply: AC380V 50HZ Electrical Capacity: 5KW * 3PH Design Temp: - 130Deg. C Design Pressure: 0.5 - 0.7 Mpa Outer Wall Material: SUS Frame Material: 100% SUS304 Barrel Capacity: 60L Wheel Speed: 7,200 rpm Max Barrel Speed: 0 - 26rpm Media Throw wheel Size : 250 Operation Mode: Touch Panel
Product Description It is used for beer waste, white wine grains and other high-humidity slag pressure filtration dehydration, strong dehydration, low power consumption, long service life, dehydrator manufacturer price is affordable, is the main equipment to achieve dehydration of winery waste. Principle The material passes through the conveyor, transported to the hopper of the dewatering machine, and evenly laid on the filter belt through the auger. The filter belt is leveled by the height of the material layer with the operation of the equipment so that the thickness of the material is completely uniform. Then, the upper and lower two ring-shaped filter belts are completely clamped, and the material layer is clamped by the driving roller, and the pair of rollers in the dewatering zone is mechanically pressed for several times to press out a large amount of water. According to the characteristics of the material, the extrusion force is automatically adjusted to meet the customer's requirements for material moisture.
Material: EPDM+PVC Hardness: 70±5 ShA Tooling cost: most of sizes are without tooling cost. Service: usually 50m/roll or as per customers' package. Should you have any requirement on rubber products, please feel free to contact me. Hope to get your early response.
We can produce FDA grade silicone gasket, the surface will be clean and translucent. The surface with etched or smooth that we can produced. We also can provided the FDA Certification, if you need, please let me know. If you have requirement on this kind of products, please feel free to contact me. I will glad to offer to you. I'm waiting here for your inquiry.
New product lab banbury mixer Dispersion kneader is used for rubber&plastic raw material mixing and dispersion, just like the pvc eva nbr sbr etc.The specific proposal would be based on the materials characteristic, production capacity. Specifications for dispersion kneader Type Unit Ln-1 to ln-10 Capacity Liter 1-10 Driving motor Kw 2.2-15 Flip device Hydraulic flipping Flip angle ° 110 Air compressor Kw 2.2 Water cooling Mpa 0.2-0.4 Electric heating W 650-1800 Size Mm About 1900*1000*2000 Weight Kg 800-2300 Main features 1) fit for various of high filled composites. 2) effective leak proof device. 3) m-w type pressurization for even dispersion. 4) accurate control system(temperature system ;electric system). 5) low maintenance by imported accessories.
Construction: Tube:oil resistant synthetic rubber. Reinforcement:four high tensile steel wire spiral layers (4 w/s). Cover:â abrasion and weather resistant synthetic rubber. Temperature range40c to +121 c. Applications: Ideally suited for high-impulse applications. No skiving required with w-series fittings. Recommended for petroleum and water-bases hydraulic fluids in very high pressure applications. Meets or exceeds all sae 100r12 specifications.
Construction: Inner Tube:Polyester elastomer(cream color). Reinforcement:One polyester braid. Cover:Proprietary urethane blend("Tuff-Skin"). Cover color:Black,non-perforated(other colors available). Temperature range: -40F-135F(-40C-57C)Limited to 150F(+66C)for water-based or fire resistant fluids.(Delta) working length at rated WPSI:±2% max. Features: Bonded construction,slim profile and light weight,flexible and kink resistant,black color denotes 4000 psi,low coefficient of friction,excellent cut,gouge and abrasion resistance 4000psi working pressure. Applications: High pressure water cleaning ,lateral sewer lines,water jetting equipment,not for hydraulic applications.
Construction: Tube:Oil resistant synthetic rubber. Reinforcement:Four tensile steel wire spiral layers. (DN10/12/16/19/25) Six tensile steel wire spiral layers. (DN32/38/51) Cover:Black, abrasion and weather resistant synthetic rubber. Temperature range: -40° C to +121° C Application: Heavy duty impulsive high pressure hydraulic applications like excavators, dosers, dumpers, cranes, compactors, rock breakers and hydraulic drill rigs and other construction equipments. Suitable for petroleum based hydraulic fluids, synthetic esters, biodegradable hydraulic fluids, water-glycol based fluids and air.
Construction: Inner Tube:Oil resistant synthetic rubber. Reinforcement:Two high tensile steel wire braid. Cover:Abrasion and weather resistant synthetic rubber. Temperature:-40C~+125C. Application: Mining, metallurgy, petroleum, construction machinery and chemical industry.
Construction: Inner Tube:NBR, Black, Smooth. Reinforcement:Fine wire reinforced, Electrically conductive. Cover:Synthetic Rubber. Temperature:-20 C to +45 C. Feature:Conveying medium: Industrial water, waste water, seawater and irrigation inagriculture. Character: The hose has dual performance that is able to bear positive & negative pressure, it is able to work freely under the vacuum-80kpa(600mm mercury column), without flat& delamination, has good flexural property. The rubber body is flexible, the burst pressure is at least treble than working pressure.
