Rubber sheet Hardness:65+/-5a Tensile strength: 3mpa Elongation: 200% Density: 1.5 10m x 1.22m(max) x 3mm(min) Corrugated
Products Infomation: The characteristics; Water resistance: closed bubble pore structure, non-absorbent, moisture-proof, waterproof performance is good. Corrosion resistance: resistance to sea water, oil, acid, alkali, such as chemical corrosion, antibacterial, non-toxic, tasteless, pollution-free. Machining: no joint, and easy to hot pressing, cutting, coating and laminating processing. Shock: high rebound elasticity and tension resistance, strong toughness, has a good shockproof/buffer performance. Heat preservation, heat insulation, excellent thermal insulation cold and low temperature resistance, resistant to cold and exposure. Sound insulation: closed bubble hole, sound insulation effect is good. EVA foam tube is with EVA for base material, can be custom-made according to customer requirements, produce different diameter specifications of products, welcome calls come to negotiate. Usage : Toy accessories, furniture, hardware product packaging.
Products Infomation: FEP FilmThicknesses from 0.015mm to 0.3mm * Excellent thermal stability: Usable throughout a wide thermal range -200 to +200°C (-328 to +392°F) * Chemical Inertness: Resists almost all chemicals, such as strong acid, strong alkali, salt, and organic solvent. * Anti-stick property: The lowest surface energy of all plastic films; displays excellent mould release and anti-stick properties. * Electrical reliability: High electrical insulation characterised by low-dialectic constant and dissipation factor and by high dialectic strength over a wide range of temperature and frequency. * Resistance to weathering: Inert to outdoor exposure; with unchanged mechanical and physical properties after 10 years. * Non-flammability: Will not burn in air or gas having an oxygen concentration of less than 95%. * High transparency: Transparent, with excellent transmission of ultraviolet rays and visible rays; lowest refractive index of all plastic films; characterised by very low light reflection. Standard Specifications of FEP Film
Products Information: FEP heat shrink tube,maximum continuous working temperature is 200°C, the shrinking temperature is only 110°C.Used initially for UV lamps in electronic fly killers, and subsequently for white lights, FEP has proved to be the ultimate coating material for shatterproofing lamps for this application. It allows glass and mercury to be safely contained when breakage occurs, yet does not become degraded by the heat or UV emitted by the lamps. FORBEST FEP safety coated shatterproof lamps are used where a glass free area is required: Schools and Colleges Public spaces Hotels and Restaurants Warehousing and storage Food processing plants Food preparation and display areas Supermarkets Bakeries Pharmaceutical plants Medical centres, Dentists and hospitals Leisure centres and swimming pools Agricultural Industry Stables and Liveries Standard lamp sizes: T5, T8, T10 and T12 - UVA, UVC and Triphosphur Compact U type (Linx, PLL) Circline
Products Infomation: FEP Tubing Used in applications ranging from environmental monitoring equipment to medical applications and electronics applications.forbest manufacturing manufactures a wide range of custom and stock sizes of FEP tubing. PTFE Tubing FEP Tubing is most referred to under the name "PTFE Tubing". PTFE is actually three different polymer resins: FEP, PTFE, and PFA. Applications Applications where FEP tubing is chosen usually require more clarity, flexibility or a lower heat shrinkable temperature than PTFE. Advantages of FEP Tubing Lower heat shrink temperature than PTFE More flexible than PTFE More optically clear than PTFE More lubricious than PFA
Products Infomation: Polyethylene Foam is a strong and resilient closed-cell foam. Ideally suited as the material or a component material in shock absorbing products, this closed-cell foam padding is also a great way to dampen the effects of vibration. Polyethylene is available in foam sheets that are well-suited for use as insulation, barrier or buoyancy components and as a cushioning material in packaging applications. Polyethylene foam's excellent buoyancy also allows it to be used in flotation equipment and other marine products. Details: Closed-cell, chemically cross-linked structure Lightweight Shatterproof Easy to fabricate Does not produce dust Excellent buoyancy Superb strength and tear resistance High shock absorption Impervious to mildew, mold, rot, and bacteria Superior chemical and grease resistance
Products Infomation: Viton Tubing Known for its resistance to oils and chemicals, this remarkable material retains its good mechanical and chemical resistance properties at extremely high temperatures better than any other known elastomer. Viton is also a standout material in its resistance to weather-related aging and ozone. In fact, samples weathered in direct sunlight showed little or no change in properties or appearance after 13 years of exposure. Viton's fluid resistance far exceeds that of most other synthetic rubbers. It is resistant to hydrocarbons such as benzene, carbon tetrachloride, toluene, and xylene — fluids that normally act as solvents on rubber, disintegrating the material; leading to tubing failure. Engineers looking for exceptional resistance to petroleum-based fuels, oils, lubricants, and mineral acids at elevated temperatures will often turn to Viton, because most other thermoplastics cannot meet the necessary resistance levels. Usage: widely used for all kinds of strong acid and alkali, steam, hot air, hot oil and other liquid transportation and packing, also used in work environment harsh coat of wire. Customer sizes avaliable upon request .
Products Infomation: Heat-shrinkable silicone rubber tubing. The inner diameter shrinks by about 50% simply by heating. Heat shrinkable silicone rubber tubing are used for insulation, protection, and sheathing applications. These rubber tubings have superior heat and cold resistance, flexibility, and electrical insulative properties. They typically maintain their performance characteristics over a wide temperature range, from -50°C to +200°C. Our heat-shrinkable tubing shrinks quickly by heating, and even complex shapes can be sheathed, thereby saving labor in the work process. They exhibit stable electrical properties even in the harshest conditions. Usage : Mainly used in medical equipment, household electrical appliances, aerospace, military industry, automobile manufacturing, electronic components, transformers, motors, etc.
Product Infomation: PFA Tubing (Perfluoroalkoxy) offers excellent crack and stress resistance and is used when more demanding mechanical characteristics are required. PFA Tubing is the product of choice for applications involving extreme chemical resistance combined with high temperature exposure. PFA Tubing is preferred when additional clarity, flexibility, and a higher continuous service temperature are required. PFA Tubing provides stiffness and long flex-life (up to 500º F) and has all the general properties of PTFE. In the semiconductor and pharmaceutical industries, PFA HP (High Purity) Tubing is used for fluid handling applications requiring an extremely low level of chemical extractables. PFA Tubing Offers: Higher thermal stability than FEP Working temperature of up to 500º F (260º C) Non-flammable Lower permeability than FEP Combines attributes of PTFE and FEP Translucent Maintains mechanical strength at high temperatures Moisture absorption close to zero Superior high purity properties Availabe in coiled hose and convoluted constructions FDA compliant for food contact Suitable for use with flare or conventional fittings
Accelarator: mbt(m), mbts(dm), zmbt(mz), mdb, bt, cbs(cz), mbt.Na, nobs, tbbs(ns), dcbs(dz), dptt(tra), tbztd, tetd, tmtd(tt, tmt), tmtm(ts), zbec(zbdc, ztc), ddts, zdbc(bz), tibtd, zdc(zdec, ez), zdmc(pz, zdpc), zepc, sdbc(tp), tdec, zbpd, sbec, zdtp, zdibc, dotg, dpg(d), cdmc(cdd), detu, etu(na-22), dbtu, dptu( ca), accelerator h.
Our oem quality rubber tracks use the most advanced metal assemblies available in the design of our excavator tracks. Depending on your machine, our tracks can reduce vibration and noise levels up to 100%. Available in the following john deere rubber track models John deere 120 John deere 120c John deere 15 John deere 17 zts John deere 17d John deere 25 John deere 27 zts John deere 27c John deere 27c zts John deere 27d John deere 30 John deere 35 zts John deere 35c John deere 35c zts John deere 35d John deere 50 zts John deere 50d John deere 50d zts John deere 60d John deere 80 John deere 80 c John deere ct 315 John deere ct 322 John deere ct 323dt John deere ct 332 John deere ct 333dt Etc. A&s complete supply range for rubber tracks Bobcat rubber tracks Mitsubishi rubber tracks Jcb rubber tracks Volvo rubber tracks Kobelco rubber tracks Yanmar rubber tracks Hitachi rubber tracks Kubota erubber tracks John deere rubber tracks New holland rubber tracks Komatsurubber tracks Caterpillar rubber tracks Kato rubber tracks Hyuadai rubber tracks Case rubber tracks Sutitomo rubber tracks Doosan rubber tracks
Types: Single Sphere, double-sphere; Flange Type, Union Type Flange drilling: ANSI class 125/150, DIN PN 10/PN16, JIS 5K/10K Working pressure: 1.6mPa (16 kgf/cm2) Working degree: -15 to +115 degrees Celsius Working medium: Vapour, compressed air, cold & hot water, seawater, oil, weak acid, alkali Material list: Body: Neoprene, EPDM, NBR Lining: Chinlon Cord Fabrics Frame: Hard Steel Wires Flange: Carbon Steel.
Part Name: Auto Rubber bushing Products function: Play the effect of Fixing and Cushioning effect . Mold Style: injection Application: Suitable for automobile Chassis System. Lead Time: According to clients' requirements Package: PE bag+outer carton,34*28*27cm, 100pcs/ctn We can also provide other standard bushing or engine mounting for different cars, and the OEM number is as below: 48331-0D040 48815-75010 48815-75020 48815-05160/12400 48815-05170/12410 48815-0F030/42120/64010 48815-0F040/42110/64020 48815-0D040 48750-02020 48815-0K010 48815-02060 48818-06230 48815-0K070 48815-BZ010 48818-05080 48818-21080 48818-33050 48818-06090 48818-05070 48818-48010 48818-48040 48815-42100 48815-42090 48815-42070 48815-42080 48815-12390 48815-12370 48815-33100 48818-42010 48818-48020 48818-21020 48815-33110 48818-42020 90385-18046 90385-18009 90389-18002 48815-30160 48815-06190 48815-02130 48815-30551 48815-60350 48818 20290 48815-05110 48815-02110 48815-48040 48815-02090 48815-48030 48815-44010 48815-44020 48815-32120/32110 48815-32040/32060 48815-32090 48725-12460/12150 48725-33020 48674-22141/22120 48725-30060 48674-32110/32120 48061-27011 48061-27010 48061-28040 55110-CG000 42304-48031 48710-48050 48740-16080 48740-16080 48710-28140 48710-52040 48740-52030 48655-06050 45516-02100 45516-02090 48655-12170 48654-12120 48710-42020 48725-24100 48780-42010/420102 48654-42040 48068-42051/12300 48725-48011 48654-12070 48818-12280/05120 MR589637 4056A079 4156A028 MR519880 4156A004 MR403775 MR554028 MB338594 4156A041 MR319183 MB111071 MB-111203 MB025153 MB175581 MB025185 MB111070 MB0294604 MR554271 MR374520 MR374519 MN100250 MN101438 MB633820 MB633870 MR589033/MR589034 MR151760 MB430385 MR-102012 MR-102063 MR455726 MN101438
Material: Steel and rubber Raw Material Brand: Momentive,Dupont, ShinEtsu,Wacker, Lanxess Material Standard: ASTM D2000,SAE J200,JIS and so on Size: According to your requirements Products function: Play the effect of Fixing and Cushioning effect . Mold Style: Compression,injection,extrusion,LSR injection Application: Suitable for automobile Chassis System. Lead Time: According to clients' requirements Package: PE bag+outer carton or according to clients' requirements
Neoprene hose is made of 2 layers neoprene coated glass fiber fabric, stainless spring steel hidden between the 2 layers. Glass fiber cord spiral on the outer surface. Applicable for high temperature and low pressure. Material: Wall: 2 layers neoprene coated glass fabric; Spiral: Spring steel wire hidden between the 2 layers, hi-temperature glass fiber cord. Properties: Double-layer Very good heat resistance Leak-proof; Kink-proof Smooth interior Small bending radius Color: Black Temperature range: -50 C approx. To +150 C approx. 1pc/brown carton
we can supply you undercarriage in rubber track and steel track.We can design undercarriage according to your working environment and requirements.
RTV liquid moulding silicone rubber has the following features a. low viscosity, exceptional fluidity and easy operation : 21000 cps suitable for pouring b. resistance to deformation, high-temperature 220 degree centigrade c. acid, alkali and ageing-resistance d. low shrinkage< 0.2% e. good tensile strength 362 (kgf/cm) f. high reproduction times Operation tips of rtv liquid moulding silicone rubber a. adding too much silicone oil will destroy the molecular of silicone rubber, which will cause a decrease of the tensile and tear strength of the mold and deformation may occur. b. remember to take the proper silicone rubber to make the mold for suitable products. for products with delicate and complicated patterns, you are expected to use soft silicone to make molds. While for products with easy and smooth patterns, you should choose hard silicone rubber. Plus: We have free CD on how to operate for our customers enclosed with product package. 25kg/drum and 200kg/drum
(1)we provide rubber expansion joint dn40, 50, 65, 80, 100, 125, 150, 200, 250, 300mm. (2)we can also produce double sphere. (3)low price. We produce various hose forming machine, so we have lower cost than others. (4)wide diameter range. Our machine can produce the hose minimum to dn 6mm. (5)high quality. Our company is an experts in producing the hose forming machine. Pls contact:tina.Li@fugeco.Com (1)we provide rubber expansion joint dn40, 50, 65, 80, 100, 125, 150, 200, 250, 300mm. (2)we can also produce double sphere. (3)low price. We produce various hose forming machine, so we have lower cost than others. (4)wide diameter range. Our machine can produce the hose minimum to dn 6mm. (5)high quality. Our company is an experts in producing the hose forming machine.
4PCs Shock Absorbent Pads, Easy to Install, Reduces irritating noise & damaging vibration, Reduces maintenance costs, For use with all washers & dryers. Anti Vibration Pads Contains 4 pads. Size: Dia. 6.5 cm Weight 1 pc: 43 grs Material: TPR Packing: colour box Packing: 8 sets into an export
It has good resistance of high temperature; nonpoisonous and tasteless which has no effect on health, it can be used in chemical , Electrical, fitness and other industries with different temperature conditions, temperature range is -60 to 200¡æ Name :rubber sheet Thickness: 1-30mm Width: 0.6-2m Length: 1-20m Application:industry grade, food grade Tensile strength: 6-12mpa Inner: plastic film, outer: woven bag
