Cantilever racking, composite structure, it mainly used for storage of long figure goods, annulation’s material , plates and tube material. It can separate for light duty,middle duty and heavy duty types according to load capacity, while it can separate for single and double types according to its structure. Features: 1) The cantilever racking is suitable for storing long, circular or irregular shape articles 2) It's suitable for the storage and reorganization of the tall and slender good 3) There are two structures_single arm and double arms. 4) It fit for small space and low warehouse 5) It is easy to fetch or place goods. 6 Mark: non-standard specification is available.
Specification : Product Name: 7 Slots Knife Holder Material : Stainless steel Type: Wall mounted Size : 12" x 12" x 2-1/2" Features: Stainless steel kitchen knife rack. With seven knife slots, wall mounted type. Make a perfect storage for your kitchen knife, safe and easy to use.
Product Name: Radio shuttle racking/storage rack/warehouse storage rack/storage shelf Radio shuttle is a racking system relies on electric Pallet Runners automatically high density pallet storage on racking rails it has three major parts rack, Pallet Runners and Forklift. Radio shuttle rack is suitable for those big quantities but small variety goods like foods, beverage, chemical and tobacco industry especially popular in refrigeration storage house. Compared with Drive -In Rack the radio shuttle has greatly make full use of warehouse space, improved the work efficiency, can store high density products and besides no need forklift entry whist store and pick up goods. Features: 1)High-density storage, high storage utilization 2)High efficiency, greatly reducing the waiting time 3)Job flexibility, the goods can operate FIFO model and LIFO model 4)Safety, reduce shelf impact and improve safety productivity The rail guided vehicles compact rack system(RGVCRS) achieves the semi-automatical compact pallet storage, by this combination with the channel racks and rail guided vehicles. According to the locations of in or out entrance, the RGV could be sorted two kind of model, first in first out(FIFO) and last in first out(LIFO). FIFO: The pallets loading entrance in one side, and taking out in other side Advantages: To achieve the order of logistics access, meeting the general requirements of logistics To realize logistics access division operation, improving on the spot management. Disadvantages: Must be arranged forklift channels in two side of the RSCRS,the usage rates of dynamic storage is lower than the LIFO model LIFO: Pallets loading in or taking out all in one side of RSCRS, and arranging one forklift channel only one side Advantages: To arrange one forklift channel only one side, and utilizing the storage area maximally To fulfill the situation which undemanding the specified order of seniority. Disadvantages: Can not achieve the specified order of pallets
Product name: Cantilever Racking/Cantilever Rack/shelf/storage equipment /logistics equipment/cantilever raking/storage rack /warehouse racking system Cantilever racking, composite structure, it mainly used for storage of long figure goods, annulation’s material , plates and tube material. It can separate for light duty,middle duty and heavy duty types according to load capacity, while it can separate for single and double types according to its structure. Features: 1) The cantilever racking is suitable for storing long, circular or irregular shape articles 2) It's suitable for the storage and reorganization of the tall and slender good 3) There are two structures_single arm and double arms. 4) It fit for small space and low warehouse 5) It is easy to fetch or place goods. 6 Mark: non-standard specification is available.
Product name: Steel structure garret,storage rack, mezzanine floor, warehouse steel rack, All composite racking or light steel structure, with high load capacity, low cost and handy construction. According to areas and using required the general light load capacity that it will choose composite racking structure, while the large span and heavy duty load capacity that it will choose composite light steel structure. Features: Steel structure garret is suit for high warehouse, light cargo, pick by man and large storage quantity situation, which can increase the using space. Steel structure garret systems are widely acceptable to automobile and logistics industry. Its bottom level can be shelf form and above flat form or both shelf form. The bottom shelf is not only storage goods place but also support the above level. Can be design many layers(usually 2-3 layers), and with staircases handrails, elevator and lighting systems. If the bottom beam distance can make short, the whole system cost can low down a lot too. Sample : we will send you sample for your reference, but have to pay from your side; we will refund the fee once you have an order with us! Services: Our free services include consultations and sample CAD layouts of your proposed rack system. Don't hesitate to consider reviewing the racking systems on site or at our headquarters. Get the racking system you need at the best price guaranteed.
Gravity racking is derive from pallet racking, using the roller track or pallet with bottom-wheel,have the track’s gradient(approx 3°),use the goods weight, realize the cargo FIFO(first-in- first-out) principle, suitable for large quantities and the same type of goods storage operation, make use of high space. Especially for storage have warranty period and not long term backing of goods. Features: 1)Gravity Racking is evolved by pallet shelf 2)Adopt by roller tracking or the bottom wheeled roller tray 3)Particular for a certain extent, not long backlog cargo. 4)The whole depth (roller length)not need too long. 5)In the middle can add replenishment stock loaded. 6)Not make too high (max 6 meters). 7)Load capacity is 1000kg of unit Sample : we will send you sample for your reference, but have to pay from your side; we will refund the fee once you have an order with us! Services: Our free services include consultations and sample CAD layouts of your proposed rack system. Don't hesitate to consider reviewing the racking systems on site or at our headquarters. Get the racking system you need at the best price guaranteed.
Product name: Storage racks, storage mezzanine racking, heavy duty racking, warehouse storage racking All composite racking structure, fit for much higher warehouse, storage goods by manual and storage generous quantity goods. It can be designed into two or three layer according to actual situation and ensure full use of the space. It is widely used in the areas of automobiles, electronics and mechanics, etc. Features: Mezzanine Racking&Multi-tier racking is suit for high warehouse, light cargo, pick by man and large storage quantity situation, which can increase the using space. Multi-tier racking systems are widely acceptable to automobile and logistics industry. Its bottom level can be shelf form and above flat form or both shelf form. The bottom shelf is not only storage goods place but also support the above level. Can be design many layers(usually 2-3 layers), and with staircases handrails, elevator and lighting systems. If the bottom beam distance can make short, the whole system cost can low down a lot too.
Product Names: Drive in racking/storage rack/warehouse rack/warehouse storage rack Drive in racking is designed for storage few varieties and large quantities of similar goods with very high space utilization. The forklift truck can drive into lane to storage goods. Goods are storage and remove from the same side, or done from the opposite side in accordance with the “ first-in-first-out” principle. Features: Used in conjunction with special purpose pallet handling equipment which may require guidance, by electronic wire or by steel rail. Pallet support rail is punched and roll formed, so it has the character of long inertial distance/strong load capacity. Be used in food industry, chemical industry, clothes industry and freeze warehouse and so on. Picking direction has single and double rows. Single one (near wall) depth is not exceed 6 pallet depth. Double one(middle area can pick goods) depth is better control in 12 pallet depth. This kind system usually not exceed 10 meter high. To fasten it, not only need the strong structure, but also need to add fix equipment. Goods is better not too big and too weight, usually less than1500kg. The width is not excees 1.5 meter. And can work in trucks.
Product name: Flow-through Racking, Flow through rack, storage through racking, warehouse rack system. By using composite racking and roller fluency rail system, impose the goods’s self weight to achieve goods “ first in and first out” principle. It is suitable for place of assembly line,logistic distribution center, convenient storage, save space and upgrade efficiency. Features: 1. Using aluminum or steel rail system, and the influence of gravity, first in and first out principle for the goods is implemented. 2. Its widely used in supermarket, medicine, and chemical and electron industries. 3. Major components of flow-through racking include the body, rail track, hoop, and roller and so on. 4. Convenient to access and suitable for such places as the two sides of the assembly line and distribution center. 5. Mark: Non-standard specification is available. Sample : we will send you sample for your reference, but have to pay from your side; we will refund the fee once you have an order with us!
Pallet racking is most extensive and simplest of all storage systems, can use all kinds of transit equipment, 100% freely storage and get goods, simple to install and economic usage. Features: 1) Pallets can be located, accessed and moved individually. 2) Rapid handling of almost all types of pallet sized goods. 3) Infinitely adjustable and offering a wide range of options and components to accommodate specialized needs. 4) Maximizes space use in any warehouse configuration while retaining optimum product accessibility. 5) Strength and rigidity prevents compression damage to goods. 6) Bottom level of pallets can be stored on the floor, lowering structure costs. We offer design customized, so need following rack’s factor: Weight of goods( include pallet or container) Dimension of pallet and goods(WxDxH) Pallet’s entrance of fork direction Storage ares( Length, wide, height) Type and parameter of forklift( include lift height and turn radius) Storage goods quantity and storage requirement.
Feature and function: 1.Comply with ansi/eia, rs-310-d;iec297-2; din4191:part1; din41494: part7; gb/t3047.2-92 standard, compatible with 19" international standard, metric system and etsi standard. 2.Knockdown and simple design, low cost, easy installation 3. Optional accessories(cable management, wire management, cantilever shelf, drawer flat) 4.19"frame, made by 2mm profiled steel, perforated at both sides Color:ral9004/ral7035 Pp+foam+carton
1) mdf/solid wood/plywood/wood veneer with lacquer finish 2) metal/stainless steel/hardware accessory with baking finish 3) tempered glass/hot bending glass/acrylic/led light
Wire display rack 1.Kd design 2.Factory direct price 3.Oem&odm 4.10 years experience Size:600*400*1800mm Weight:20kgs
Self management 100% quality checking of top-ranking clothes hanger before shipping, refund or replacement for any product faulty, hired , trained, managed & motivated by us, better retention and value delivery to the clients. Software & application Fully automated database system for: quality control, bms system/ records, client feedback. Packing: 1set/box, 4boxes/carton Box size: 82*12*22cm Ctn size: 90*55*30cm Container(20¡¡¥/ 40¡¡¥/ 40hq): 170pcs/340pcs/ 450pcs
Radio shuttle racking is a new kind of storage management systems, with high density storage including racking and electrically powder pallet runners with works with forklifts, makes a new concept for loading pallets and space storage styles.The main parts of the radio shuttle carts are manufactured in original factory of the world famous brand, and the program module is sourced from top fortune 500 in the world, we will design the program according to actual request for you only! Weight , dimensions
Radio shuttle racking is a new kind of storage management systems, with high density storage including racking and electrically powder pallet runners with works with forklifts, makes a new concept for loading pallets and space storage styles.The main parts of the radio shuttle carts are manufactured in original factory of the world famous brand, and the program module is sourced from top fortune 500 in the world, we will design the program according to actual request for you only! Weight
Material: stainless steel and plastic Size:495~850*305*605mm Color:white and chrome Packing:1pcs/inner box, 10pcs inner box/carton Carton dimension:62*35*65cm N.W/g.W:22/24kg
4 shelf display racks, with casters. Great as a umbrella display, or other items. Color: black 4 shelf display racks, with casters. Great as a umbrella display, or other items. Color: black
5 shlef candy display rack Available as a candy display, or for displaying other small items. Color: blue 5 shlef candy display rack Available as a candy display, or for displaying other small items. Color: blue
Supermarket gondola shelves, plain back board, high quality, cheaper cost, one stop service Model:at-05 General products point: 1.Upright height: from 120cm to 300cm 2.Bay width: 60cm, 80cm, 90cm, 100cm, 110cm, 120cm, 130cm 3.Shelf deepth: 20cm, 25cm, 30cm, 35cm, 40cm, 45cm, 50cm, 55cm, 60cm, 70cm 4.Layers of gondla: 3-8layer, as customer choice 5.Load capacity for shelf: 80-160kg/shelf, as customer choice Whats include for one gondola? 2 pcs upright unit 2 pcs base shelf 4+pcs adjustable upper shelf 8+pcs bracket All back panel 1 pcs top cap 2 pcs click plinths 6+pcs ticket strip as customer choice 6+pcs front stoper fence as customer choice Sales information: 1.Payment terms:t/t, 30% deposit, balance paid when cargo finish. L/c, 30% deposit, balance use l/c ways. 2.Trade term:exw, fob, cif, cnf 3.Lead time:normally 15days when receive deposit. 4.Moq:20unit. 5.Oem/odm welcome. 6.Customer design or different require are avaliable. Why choice us? 1.We supply high quality products with reasonable price; 2.We are the professional manufacturer(started in 1986, 100000 square meter, iso, ce, sgs certified); 3.We have advance production machine; 4.We own 25years manufacture exprience. 5.We own 15years export exprience and export more than 40countrys. 6.We have professional sale team. 7.We support one-stop sloution service. Package by carton for supermarket shelves
