Materials: carbon steel and stainless steel (302,304,304L,316,316L etc).
Characteristics:The welded stainless steel water well screen is made up of rods and warp. The rod can be round wire, triangular wire or trapezoid wire. The warp is triangular wire (V-shaped wire). Water well screens have a structure and high open area, as well as accurate slot dimension. At the same time, water well screen have heat-resisting, anti-corrosive, good machine capability, last long, safety and reliability and so on characteristics. It can be used in many kinds of medium filtering.
Uses: The strainer is a kind of filtered water tubing with the perforation .it can use with the deep well pump, dive the water pump, also may use in the water-treating equipment, the environmental protection, the sea water transforms into the industrial water and life use water desalination treatment, running water treatment, water softening treatment, the petroleum industry: The petroleum product terminal filters and the chemical acid, the alkali liquid filters, the ethyl alcohol and so on the organic solution recycling filters.
Continuous slots significantly increase discharge area,thus providing greater access to water-bearing zone .
We can produce this pipe with diameter 80mm-550mm ,slot size 0.1mm-10mm,length 50mm-5850mm .
Steel frame screens are mostly applied to the shale shakers with wedge fastening equipment. The screen frames adopt that high-strength square steel tube welded to multi-ribbed construction. They are sturdy and reliable. These screens are constructed with two or three stainless steel layers bonded to a steel support plank. Accessary rubber plugs may be used to repair rips or tears. By doing this, we can cut down time and reduce the production costs. We can supply steel frame screens with mesh sizes ranging from 20 to 250.
Steel frame screen is in common used presently, that are constructed mostly withe two or three stainless steel layers bonded tightly to the steel frame.The frame is made up of the high-strength square steel tube or flat steel welded to multi- ribbed construction.These layers are coupled with the frame through metal backing plate or bonded straightly as well.We possess the strong experience and the ripe technology,and will provide various specifications of steel frame screens to serve the clients' demands.
Features of Steel frame screen
1. Different layers with different density. To arrange these layers reasonably and exactly, the screening effect will become more and better.
2.High strength frame, multi-ribs and the mesh cloth with moderate tension , from one reliable combination , which can increase screen�??s acceptable flow , the intensity and the lifetime
3.The wedge-shaped fastening device, can make the erection of screens more handily and quickly
4.The mesh divided into many independent small units by grids of the backing plate ,can prevent rips or tears from spreading overmuch. Accessory prepared rubber stoppers can be used to repair damage. By doing so, the operator can cut down the stop time and reduce the cost.
High Strength fall protection Safety Harness safety belt for construction
Item No. : SS-T301
Product Name: safety harness with large hook lanyard
Material: 100% polyester
Color: green with yellow or as your requirement
Webbing width: 45mm or 50mm
Strength: 23KN
Feature: anti-tear, comfortable, flame resistance, corrosion resistance, etc
Package : as your requirement
Available Weight per Unit:
0.9kg, 1kg, 5kg, 12.5kg, 15kg, 20kg, 27kg, 250kg and 350kg.
Available Spools: plastic spool and metal basket
Available Diameters: 0.6mm, 0.8mm, 0.9mm, 1.0mm, 1.2mm, 1.4mm & 1.6mm
1.Introduction:
The machine is used for making rings automatically. It has functions of accounting ring length, folding one side of ring, seam welding ring and curling another side of ring. The produced rings are used as Chine on both drum ends. This machine is controlled by PLC and inverter.
2.Technical parameter:
ModelSANHG700
Ring diameter250mm-700mm
Steel band width35-75mm or customerized
Steel band thickness0.5mm
Cutting tolerance+/-0.5mm
E71T-1 is an all-position, flux cored welding wire, which is intended for single and multiple pass welding of low-alloy and carbon steel where a minimum 70,000 psi tensile strength and good notch toughness is required. It is an excellent general purpose welding wire. This wire has very low fume, stable arc, good slag removal and excellent mechanical properties.
AWS Specification: AWS A5.20
AWS Classification: E71T-1
Typical Applications:
Buff and fillet welding of hulls and storage tanks
Structural steel
Farm machinery
Construction equipment
General carbon steel fabrication
Available Diameters: 0.8mm, 1.0mm, 1.2mm, 1.4mm & 1.6mm
Available Spools: plastic spool and metal basket
Available Weight per Unit: 0.9kg, 1kg, 5kg 15kg
Welding electrodee7018 is a low-hydrogen iron powder type electrode that produces high quality x-ray welds. It can be used in all positions on ac or dc reverse polarity welding current. E7018 is recommended for welding medium grade carbon steels, where no preheat is used, and on cold rolled steels normally exhibiting excessive porosity when welded with conventional electrodes.
Typical applications:
Low-alloy structures
Low, medium, and high-carbon steels
Offshore rigs and power plants
Steel structures
Tack welds for tubular wire applications
Aws specification: aws a5.1
Aws classification: e7018
Welding current: ac íºc dc en (electrode negative)
Pressure gauge
Bouron tube: c style spring pipe (<16mpa)
Screw spring pipe (ª16mpa)
Do not pass 3/4 of the upper limit when measuring the stabilization load, do not pass 2/3 of the upper limit when measuring the wave pressure, and not under 1/3 of the upper measuring limit within 2 kinds of minimum pressure.
Model y-1106
Diameter:40, 60, 100, 150, 200, 250 mm
Precision grade:2.5·+4.01.6·+2.51.0·+1.6
Measuring range:0+0.1 to 0+60/-0.1+0 to -0.1+2.4, 0+0.1 to 0+100
0.1+0 to -0.1+2.4 mpa
Connection thread: m10-1 m14-1.5 m20-1.5
Introduction:
This fridge door gasket welding machine is specially used in welding refrigerator door gasket, rubber gasket, which has the features of compact structure, easy operation and accurate temperature controlling. The heating tube is made of imported materials. One leg period of this machine is about 14 seconds and the leg stretching resistance is higher than the technical standard in the same industry at home and abroad.
Feature:
(1) This machine adopts advanced Omron PLC control system, famous-brand cylinder, and imported electrical parts to keep machine high-automatic, high-efficient, easy operation, long-using time.
(2) This machine can weld 2 gasket corners every time, after welding, it cleans (trims) rest material automatically to keep even, firm and beautiful surface of welding corner.
(3) The welding process is: heating ~ vacuum adsorption ~ welding ~ inner cooling ~ outer cooling ~ automatic outlet.
(4) the welding mould take with vacuum system, and inner cooling system, which can make the gaket corner smooth surfact and the inncer cooling systme can avoid gasket zones stick together.
(5) Photoelectrical protection system is used to protect hands being clamped in operation.
(6) Welding period is 11~14 second/ two corners, the output can reach 600~650 sets per 10 hours.
(7) This machine pass CE certification and export to different countries.
a. Material:Carbon steel, 304 stainless steel and 316 stainless steel.
b. Interchangeable design to fit tubing size from 2-3/8''to 7''
c. Configurations for ESP cablecontrol line chemical injection.
d. Materials and design can be customized to user specifications
Grade: S40W/D, S60W/D, S80W/D
The solid content of wet type marked with W is about 15%.
Product Description: Expanded microsphere is a kind of hollow spherical plastic particles. The products can be use as light fillers because of low density.
It made by expandable microsphere with Sinnos proprietary technology.
Application:
Leather repair, automotive repair of atomic dust, unsaturated polyester, epoxy casting and printing ink.
Solder Bar Factory
Price: $27,220 -- $30,572 / ton
Specification: 0.5kG-1kg /Article,
Type: Lead-free
Packing: 20 kg/box
Low temperature solder bar has low melting point, good reliability, excellent weldability, is designed for customers low temperature operation lead-free low temperature solder bar, is used in the demand for low melting point components industry.It has good wetting effect and brazing strength in welding, and can also be used for lead welding process of simpler components, with excellent conductivity and thermal conductivity, fast tin loading and good wettability.
Element: Sn42Bi58
Certificate: ISO, etc.
Payment method: T/T,Western Union,L/C,etc.
Size: Article 0.5 KG - 1 KG /20 kg/box, Can be customized according to customer needs.
Package: Standard export packing or as required.
Application: It can be used as coating material in food, machinery, electrical appliances, automotive, aerospace and other industrial sectors have a wide range of applications
BGA Solder Ball
Product: Solder Ball
Product composition: tin 99.3 copper 0.7
Product size: 13mm 19mm 22mm
customizable
Product weight: can be customized
Solder balls are electrically conductive by using a heating tool to firmly bond two or more metal conductors. Solder balls are a kind of product in solder. Solder balls can be divided into lead solder balls and lead-free solder balls, both of which are used for circuit board soldering. Made of high-purity pure tin, its wettability and fluidity are very good, and it is simple and easy to apply tin. The welded points are bright and full, and there will be no bad virtual welding phenomenon. Adding appropriate antioxidant elements, the antioxidant capacity is greatly improved. Solder balls are mostly used in the processing and production of circuit boards. However, the commonly used solder balls are not uniform in the fusion process of flux and metal, which easily causes metal solution to splash, resulting in short circuit of products, and has a bad impact on the stability of product quality.
1. This machine adopts advanced PLC automatic control system that conquers error of old machine caused by multi electric apparatus; open system adopts OMRON pneumatic element that guarantees stability of process and enhances quality.
2. It breaches many processes of old welder such as manual work for pruning rest material and welding lump and so forth.
3. This welder is double hole full automatic welding equipment; after welding, it cleans rest material automatically; therefore, it guarantee even, firm and beauty of welding angle; the production efficiency is twice of old welder.
4. Mould and frock has up and down layer with adopting precise beeline rail transmission breath that guarantees precision of equipment; the welding way is: automatic heating (firing type) ~ vacuum adsorption ~ welding ~ inner cooling ~ outer cooling ~ automatic outlet.
5. Security protection system: in order to protect pressing, it equips photoelectricity protector before mould with adopting two-hand open button; it adopts HZ12-25 switch; it can open electric case after power failure.
6. Leg period of this welding machine is 11~14 second/double angle; the output can reach 600~650 sets; the stress of welding angle is higher than criterion in same industry.
1. This machine adopts advanced PLC automatic control system that conquers error of old machine caused by multi electric apparatus; open system adopts OMRON pneumatic element that guarantees stability of process and enhances quality.
2. It breaches many processes of old welder such as manual work for pruning rest material and welding lump and so forth.
3. This welder is single hole full automatic welding equipment; after welding, it cleans rest material automatically; therefore, it guarantee even, firm and beauty of welding angle; the production efficiency is twice of old welder.
4. Mould and frock has up and down layer with adopting precise beeline rail transmission breath that guarantees precision of equipment; the welding way is: automatic heating (firing type) ~ vacuum adsorption ~ welding ~ inner cooling ~ outer cooling ~ automatic outlet.
5. Security protection system: in order to protect pressing, it equips photoelectricity protector before mould with adopting two-hand open button; it adopts HZ12-25 switch; it can open electric case after power failure.
6. Leg period of this welding machine is 11~14 second/double angle; the output can reach 600~650 sets; the stress of welding angle is higher than criterion in same industry.
1521 Wire Mesh Screen Suppliers
Short on time? Let Wire Mesh Screen sellers contact you.
