• desanding and decoring of castings
• descaling of castings, forgings and heat treated parts
• shot peening (without process security)
• deburring of plastic and rubber parts
PVC TPE manual refrigerator door gasket 45 degree cutting machine
The manual refrigerator door gasket cutting machine is used to cut 45 degree on the both ends of the gasket, it has feature of easy operate, convenient moving, and ecnomical price. the blade is rotated by the motor and move by the hydralic.
1.Wca member, nvocc member
2.Headoffice in qingdao, branch is tianjin, shanghai, ningbo, shenzhen
3.Headoffice has more than 40 staff
4.Contract shipping lines:msk, msc, cma, tsl, etc
5.Professional service and best rate with good reputation.
Laura at qdzhv.Com
Service include:
1.Sea shipping for bulk , break bulk, containers(fcl/lcl)
2.Road transport fo r normal, heavy-lifts cargoes.
3.Railway transport for containers, breakbulk cargoes.
4.Stuffing, warehousing of cargoes
5.Lashing, unlashing, cargo servey and inspections.
6.Cargo customer clearence.
7.Air shipping
special container,open top container,flat rack container,oversize machine, export and sipping expert.
Welcome your inquiry anytime, we will qoute you as soon as possible.
Hoping you business goes better and better!
COD HDPE cable communication protect pipe production line
Advantage
1. Easy operation;
2. stable running ,
3. high output , and very popular in home country and abroad.
Product Parameters
Model SJ-75(PE)
L/D 30:1
Pipe Diameter(mm) 50-200
Output(kg/h) 150-200
Production speed (m/min) 1.5
Main Parameters
Model SJ-65/33(PE) SJ-90/30(PE)
L/D 33:1 30/1
Pipe Diameter(mm) 16-32 32-63
Output(kg/h) 150 200
Production speed (m/min) 12-15 8-15
Power (kw) 37 50
The machinery electric parts details
ITEM
1 Motors
2 PLC (customized) SIEMENS 200 series
3 Interface module(customized) SIEMENS
4 Touch screen(customized) SIEMENS
5 Low voltage electrical SIEMENS&SCHNEIDER
6 Inverter ABB
7 Temperature control system OMRON
Raw materail: PVC+Other chemical
Product Introduction:
The PVC door and window profile production line can choose different specifications of conical twin-screw extruders according to different profile sections and molds, and configure the corresponding vacuum calibration table, tractor, cutting machine, stacker and other auxiliary equipment.
Technical Parameter:
Model TPM-180 TPM-300 TPM-600
Width 180 300 600
Model SJSZ-51/105 SJSZ-65/132 SJSZ-80/156
Capacity(kg/h) 180 250 350
Motor power(kw) 22 37 55
Total length(m) 18 22 26
Machine List
SJSZ Extruder
Mould
Vacuum calibration table
Haul off
Cutter
Stacker
High-Speed Mixer is used in the material mixing, stirring, coloring and other process for plastic, rubber, daily chemical and other industries. It is the perferable equipment to produce plastic board, pipes, profiles and degradable plastics.
Features:
(1) Mixed materials are made by negative pressure mixed principle
(2) The electrical instruments are all well-known imported appliances with PLC
programmable control
(3) High degree of automation and speed mixing
(4) The blade was made by stainless steel pressure and passed the static and dynamic
balance test
(5) Especially the coolant blade ued abroad advaned spiral mixing structure, the whole
container has no dead angle, cooling speed and discharging clean.
(6) Large volume
Composition of Mixer
Name Quantity(set)
Motor 1
Pot cover 1
Inner container 1
Blades and deflectors 1
Air cylinder 1
Pneumatic control system 1
Motor 1
Inner container 1
Water-cooled blades 1
Electrical control cabinet 1
Operating platform 1
Technical Parameter
Feeding way Spiral feeder
Pot body material Stainless Steel
Unloading way Pneumatic discharge
Mixing time 10-12mins
Hot mixing power 55kw
Cooling mixing power 7.5kw
Pot cover material Cast aluminium
Blade material Stainless Steel
Plastic Twine and rope filament extruding machine is automatic production line for PET, PP, HDPE, PA monofilament which is used to produce different kinds plastic rope and twine product.This unit can produce PET, PP, PE,PA monofilament automatically for plastic rope product. To make different raw materials plastic rope fiber, we have advanced and professional machine line design and technology support which is in leading position in this field. With recycled raw material, and less labor requirements, the production cost is cheap, so our clients will get good profit in the market.
Advantage
1. Most experienced manufacturer: Professional machine and mature technology with more than 20 years experience.
2. Green and Eco-friendly: 100% recycled PET flakes as the raw material for PET filament and can be recycled many times
3. Machine Development: Continuous improvement and feedback from Customers from more than twenty countries all around the world.
4. Better performance: low energy consumption, high production capability
5. Automatic Operation: Automatic and convenient operation with one or two workers
Technical Parameter
Model TPM-75 TPM-80 TPM-90
Screw L/D 30:1 30:1 30:1
Gearbox model 200 225 225
Main motor 18.5kw 22/30kw 30/37kw
Capacity(kg/h) 80-100kg 100-120kg 120-140kg
Mould Dia. 200 200 200
Filament Dia. 0.01-2.5mm 0.015-2.5mm 0.015-2.5mm
Machine List
1 SJ75/SJ80/SJ90 single screw extruder 1 set
2 Die head 1 set
3 Water-cooling tank 1 set
4 First tensile machine 1 set
5 Pre-heating machine 1 set
6 Second tensile machine 1set
7 Third tensile machine 1 set
8 Oil bath tank 1 set
9 Pneumatic tensioner 1 set
10 Two position winder 1 set
Electrical Configuration
1) Main motor frequency controller: ABB
2) Temperature controller: OMRON
3) AC contactor: SIEMENS
4) Thermal overload relay: SIEMENS
5) Breaker: CHINT or according to customer requirement
Advantage:
1. No bad smell, fresher environmental conditions
2. Final product more transparent, good for sun light
3. Sheet production is very simple, no dust pollution
Machine List
Item Name
1 Conical twin screw extruder
2 Single screw extruder
3 Hopper type drying unit
4 Extruding mould and distributor
5 Two roller calender
6 Decking roof forming unit
7 Cutting unit
8 Stacker
9 ridge roof mould
10 oven
11 Compressing unit
12 Flat board haul off unit
13 Electrical unit
Factory supply PE water pipe making machine is mainly used in the production of water supply and drainage pipes , which used for agriculture and construction , cable coating and other fields , the complete line is consisted of extruder , vacuum calibrator , hauling machine ,cutter and tipping rack , hauling machine unit has come ways of hauling , such as pillar type, three-claw type , four-claw type , six-claw type and so on . there are also knife-lifting cutter and planetary cutter with this extrusion line you can produce high quality water supply and gas supply pipes with excellent hardness and flexibility.
Feature
1.The machine adopts DC/AC motor, and Eurotherm DC/AC digital converter and high efficiency screw to ensure high efficiency extrusion.
2. This production line adapts basket type composite die head, which ensures not only the uniformity of high speed extrusion but also the stable performance of tubular goods.
3. This production line adopts high efficiency double chamber vacuum calibrating technology and spray cooling bath to improve the rate of finished products of tubular goods and meet the demand of high-speed production. The vacuum bath and cooling bath adopt stainless steel.
4. This production line adopts multi-caterpillar haul-off and ensures the synchronization.
5. The cutting machine adopts special saw blade with low noise, equipped with chip collector.
6. The whole line adopts PLC control system and large liquid crystal screen, which makes the operation very convenient.
Main Composition
Compulsory devices
1 Material charge 1 set
2 SJ single screw extruder 1 set
3 Pipe die head 16-1200mm, 1 set or several sets
4 Vacuum calibrating tank 1 set or several sets
5 Water spraying cooling tank 1 set or several sets
6 2-3-4-6-8-10-12 caterpillars hauling off machine 1 set
7 no dust-cutting machine or planetary cutting machine 1 set
8 Pipe stacker-4000-6000mm length 1 set
9 Electrical cabinet(ABB, Omron, RKC, neider etc) 1 set
10 Spare parts 1 set
Optional Devices
1 color mixer 1 set
2 Plastic crusher 1 set
3 Plastic shredding machine 1 set
4 Industrial water chiller 1 set
5 Air compressor 1 set
6 Thermocontroller for die head 1 set
7 Ink jet printer 1 set
Which main used to hang and transfer sheep carcass for complete processing, main data as following:
1)-Rate voltage/Frequency/Phase: 380V/50HZ/3P
2)-Power: 2.2Kw
3)-Hanging carcass distance:1200mm
4)-Max capacity: 400 Heads per hour
5)-Component and material:
Hot galvanized steel or stainless steel closed 8# C-beam track with rail hanger
Hot galvanized steel or stainless steel die forged chain with pusher dog
High polymer wear-resistant walking wheel
304 Stainless steel hook
Driving&pneumatic tension device
Frequency control
60*4mm 304 stainless steel tube rail (tube-rail)
40*40*4mm 304 stainless steel double rail (Dual-orbit)
Which main used to assist staffs convenient to skinning sheep hind legs,main data as following:
1)-Out size: 1600X1000X800mm (LXWXH)
2)-Component and material:
Which main used to hang and transfer sheep carcass for complete bleeding by automatic, main data as following:
1)-Rated voltage phase frequency: 380v 3p 50hz
2)-Power: 2.2Kw
3)-Hanger distance:1200mm
4)-Max capacity: 400 Heads per hour
5)-Component and material:
Hot galvanized steel or stainless steel closed 8# C-beam track
Hot galvanized steel or stainless steel die forged chain with fingers
High polymer wear-resistant walking wheel
Climbing track and downhill track
Driving&pneumatic tension device
Rotate device
Frequency conversion control
60 4mm 304 stainless steel tube rail (tube-rail)
40 40 4mm 304 stainless steel double rail (Dual-orbit)
41 Heavy Machinery Suppliers
Short on time? Let Heavy Machinery sellers contact you.
