Apllication :Food & beverage products high temerpature high pressure sterilization. Suit for:All kinds of heat resistant and water proof package materials. Such as:pouches,cans,glass jars,plastic containers, etc. Characteristics of spray sterilizer 1. Indirect heating and indirect cooling, the cooling water is not in contact with the process water, which avoids the secondary pollution of food. No water treatment chemicals are needed in the process.The equipment adopts high temperature and short-time sterilization. 2. Reduce steam consumption. The sterilized water after steam atomization is directly mixed in the sterilizer to improve the heating and cooling speed. 3. Low noise, creating a quiet and comfortable working environment. 4. Water is sprayed from different angles, and steam, air and water are mixed and convected to form a perfect temperature distribution. 5. A small amount of process water circulates rapidly to reach the predetermined sterilization temperature. 6. Four movable temperature sensing probes are equipped inside the autoclave, which can monitor the F value of the food center and the heat distribution in the autoclave at any time, and know the heat penetration at any time (the time when the temperature reaches the geometric center of the food from the food surface). 7. Perfect pressure control, the pressure in the whole production process is constantly adjusted to adapt to the changes in the internal pressure of the product packaging, so as to minimize the deformation of the product packaging, especially suitable for product packaged with gas inside. 8. The process water preheating system can ensure that the products with thermal insulation and heat filling are continuously heated up. 9. Softened water is used for sterilization to avoid dirt on the outer package due to the quality of process water. 10. It can save installation space, facilitate operation and save manpower (only need to use the control cabinet for direct operation). 11. It is suitable for the food industry such as beverage, and automatic loading and unloading during mass production. It is more convenient for the automatic configuration of unmanned workshops in the industry in the future.
The machine is widely used in many fields, it can realize the sterilization of all kinds of canned fish, petfood, etc., and all high-temperature resistant packaging. Our equipment is of high quality and low price, which can not only win more customers for you, but also win more profits for you.
Applications: The water spray retorts are well applicable for a wide range of thermal resistant packaging materials. 1.Glass bottle; 2.Metal container: tin can, aluminum can; 3.Plastic container: PP bottle, HDPE bottle; 4.Soft pouch: aluminum-foil pouch, transparent pouch, vacuum pouch, high temperature retort pouch. Features: 1.Sterilization of high temperature and short time.Minimum Indirect heating, efficient source saving. Direct heating and indirect cooling. No touch between cooling water and the process water,successfully avoiding secondary contamination; 2.Steam and atomized sterilizing water will directly exchange the heat in the autoclave. Steam heat can be 100% used, saved heat energy and gained the maximum energy utilization; 3.Low noise of the water rain retorts, creating a quiet and comfortable working environment; 4.Perfect pressure c ontrol, the whole production process of the pressure in constant adjustment, in order to adapt to the changes in the internal pressure of the product packaging, particularly suitable for the product with gas packaging; 5.The sterilization equipment makes it convenient to configure automatic corollary equipment for unmanned food workshops in the future; 6.There are two kinds of doors for your choice, namely top door and side door (optional); 7.Process water heating system (optional) to ensure that the heat - filled product is continuously heated; 8.The use of water to soften the water (optional) to avoid the use of water quality problems caused by external packaging of dirt;
Applications: The water immersion retorts are suitable for various heat resistant packaging materials. 1.Plastic container: PP bottle, HDPE bottle; 2.Soft pouch: aluminum-foil pouch, transparent pouch, vacuum pouch, high temperature retort pouch, etc.; 3.Metal container: tinplate cans, aluminum can. Features: 1.The sterilization water after preheating, the starting point of sterilization temperature, shorten the sterilization time, protect the quality of the product; 2.Save energy and increase output.Two sterilization pot at the same time using a pot of hot water work; 3.Due to full water immersion, heat can penetrate into products all around; 4.Products can avoid air contact during the whole process, leading to zero co d air in kettle. The optimized water circulating system ensures balanced heat distribution in kettle; 5. Peak pressure value can be avoided by controlling back pressure via stream inlet and outlet, largely reducing packaging material damage; 6. Smooth and rapid coo ling helps avoid thermal shock and peculiar smell; 7.PLC program control, sterilization to achieve standardization; 8.The water immersion sterile equipment also integrates the function of F value measurement, but the F value tester is optional;
Applications: The water immersion retorts are suitable for various heat resistant packaging materials. 1.Plastic container: PP bottle, HDPE bottle; 2.Soft pouch: aluminum-foil pouch, transparent pouch, vacuum pouch, high temperature retort pouch, etc.; 3.Metal container: tinplate cans, aluminum can. Features: 1.High temperature and short time sterilizationWater heating in advance to the sterilization temperature, thereby reducing the sterilization time, improve the working efficiency; 2.Save energy and increase outputThe working medium used in the sterilization process can be used to save energy, time and manpower; 3.Material consumption, reduce production costsTwo sterilization pot at the same time using a pot of hot water work, than double double sterilization pot production capacity doubled; 4.For flexible packaging products, especially the big packaging, heat penetration speed, good sterilization effect; 5.Uniform heat distribution, product quality easy control. 6.The whole sterilization process adopts PLC fully automatic linearity control. Via the PLC control, the temperature difference of thermal distribution is limited within �C. The autoclave sterilizers allow for multi-stage heating, effectively saving energy. It also has an additional F value recorder (optional), capable of storing 100 scheduled processes. -
Applications: The rotary steam retorts are well suitable for all kinds of high-viscosity products packaged with thermal resistant materials. 1. Plastic container: PP bottle, HDPE bottle; 2. Metal container: tin can. Features: 1.The rotating speed is governed by frequency converter so that rotating speed can be adjusted anytime depending on product viscosity to avoid delamination and precipitate; 2.The transmission system incorporates a reduction box with braking function and an automatic positioning system, ensuring the crate guide rail of the rotating body stays horizontal with trolley guide rail and other guide rails of matched equipment after rotation stops; 3.The sterilization water after preheating, the starting point of sterilization temperature, shorten the sterilization time, protect the quality of the product; 4.Save energy and increase output.Two sterilization pot at the same time using a pot of hot water work; 5.Products can avoid air contact during the whole process, leading to zero cold air in kettle. The optimized water circulating system ensures balanced heat distribution in kettle; 6. Peak pressure value can be avoided by controlling back pressure via stream inlet and outlet, largely reducing packaging material damage; 7. Smooth and rapid cooling helps avoid thermal shock and peculiar smell; 8.PLC program control, sterilization to achieve standardization; 9.The water immersion sterile equipment also integrates the function of F value measurement, but the F value tester is optional; 10.Newly-designed fluid switch device successfully keeps cold point in kettle to a minimum and temperature accuracy for sterilization within 0.2 C, effectively avoiding over-steaming and halfway sterilization.
Water spray Retort Sterilizer/Sterilization Retort/Sterilizing/Autoclave Sterilizer (GF-PL) Applications: The water spray retorts are well applicable for a wide range of thermal resistant packaging materials. 1.Glass bottle; 2.Metal container: tin can, aluminum can; 3.Plastic container: PP bottle, HDPE bottle; 4.Soft pouch: aluminum-foil pouch, transparent pouch, vacuum pouch, high temperature retort pouch. Features: 1.Sterilization of high temperature and short time.Minimum Indirect heating, efficient source saving. Direct heating and indirect cooling. No touch between cooling water and the process water,successfully avoiding secondary contamination; 2.Steam and atomized sterilizing water will directly exchange the heat in the autoclave. Steam heat can be 100% used, saved heat energy and gained the maximum energy utilization; 3.Low noise of the water rain retorts, creating a quiet and comfortable working environment; 4.Perfect pressure control, the whole production process of the pressure in constant adjustment, in order to adapt to the changes in the internal pressure of the product packaging, particularly suitable for the product with gas packaging; 5.The sterilization equipment makes it convenient to configure automatic corollary equipment for unmanned food workshops in the future; 6.There are two kinds of doors for your choice, namely top door and side door (optional); 7.Process water heating system (optional) to ensure that the heat - filled product is continuously heated; 8.The use of water to soften the water (optional) to avoid the use of water quality problems caused by external packaging of dirt; 9.Steam sterilization function (option); 10.The whole sterilization process adopts PLC fully automatic linearity control. Via the PLC control, the temperature difference of thermal distribution is limited within �0.2�C. The autoclave sterilizers allow for multi-stage heating, effectively saving energy. It also has an additional F value recorder (optional), capable of storing 100 scheduled processes; Technical Parameters: Model Unit 1000# 1200# 1300# 1500# Retort chamber length mm 2200 2400 2400 3200 3600 4000# 3600 4000 4200 5250 6300 Overall length mm 3000 3200 3500 4300 4700 5100 4800 5200 5450 6500 7550 Overall width mm 1500 1500 2100 2100 2100 2100 2300 2300 2600 2600 2600 Overall height mm 1800 1800 2000 2000 2000 2000 2300 2300 2500 2500 2500 Effective volume m� 2.0 2.2 3.1 4.0 4.6 5.0 5.3 5.8 8.1 10 11.8 Crate pcs 2 3 3 4 4 5 4 5 4 5 6 Steam consumption KG 85 95 138 185 210 230 250 310 385 480 575 Power KW 6.5 6.5 12 12 12 12 12 12 16 16 16 Design temperature 145 Test pressure 0.44Mpa Design pressure 0.35Mpa
Jacketed Pot/Kettle(GF-J01) Applications: Widely used in candy, pastry, drinks, fruit juices, dairy products, canned food and brewing, pharmacy, daily chemical and other industries. Features: 1.Kettle body adopted one-time stamping of stainless steel head to ensure the inner side is smooth; 2.Three kinds of heating forms for choice: Steam, gas and electric heating. Big heating area and high thermal efficiency; 3.Two kinds of design structure: Tilting and Horizontal Static. Tiltable kettle ensures quick and clean discharging; 4.Mixing function and non-mixing function for your choice; 5.Compact structure, easy operation and maintenance, high working efficiency, low consumption and long service life. 6.Every part contacting food made of high quality stainless steel and completely in line with food hygiene requirements.
Static Steam Retort Sterilizer/Sterilization Retort/Sterilizing/Autoclave Sterilizer(GF-SS) Applications: 1.Metal container: tin can; 2.Soft pouch: aluminum-foil pouch, transparent pouch, vacuum pouch, high temperature retort pouch. Features: 1.Water from different angles, steam, air and water mixed convection, forming a perfect temperature distribution; 2.Low noise, create a quiet, comfortable operating environment; 3.Equipped with four movable temperature sensing probe, can be monitored at any time in the food center of F-measure, the thermal distribution of the kettle, at any time to understand the thermal penetration (temperature from food surface to the food geometric center of time); 4.Perfect pressure control, the whole production process of the pressure in constant adjustment, in order to adapt to the changes in the internal pressure of the product packaging, so that the product packaging of the deformation of the lowest, especially suitable for gas bearing products; 5.The whole sterilization process adopts PLC fully automatic linearity control. Via the PLC control, the temperature difference of thermal distribution is limited within �0.2�C. The autoclave sterilizers allow for multi-stage heating, effectively saving energy. It also has an additional F value recorder (optional), capable of storing 100 scheduled processes.
Horizontal Vacuum Cooking Mixer(GF-C01) Applications: It is used for processing foods such as sweetened bean paste, fruit mash, jam or traditional Chinese medicine etc. with high viscosity cooking and vacuum compressing. Features: 1.U shape mixer body of the machine is vacuumized from the top, bushing uses steam heating, combined transmission of stepless speed change, worm wheel and speed reducer increases torque of cross axle mixing, with polyvinyl chloride clapper mixer, during material turnover and mixing, full contact between mixer and pan body ensures no mixing dead angle. 2.Uncovering, discharging and resetting of pan body use hydraulic and mechanic transmission control, convenient to operate. 3.Vacuum frying can lower frying temperature, especially suitable for frying thermal sensitive raw material, avoiding color and taste change o f raw materials. It increases frying efficency, reduces energy consumption,and shortens frying time.
Applications The rotary steam retorts are well suitable for all kinds of high-viscosity products packaged with thermal resistant materials. 1. Plastic container: Plastic bowl or cup; 2. Metal container: tin can. Features of Steam Retorts 1.Low noise of the water rain retorts, creating a quiet and comfortable working environment; 2.The inside rotating body is made by using one-time molding process in machining center after being welded and assembled. The concentricity of axis and rotating body during rotation is controlled within ideal range; 3.The supporting rollers adopt antifriction bearing structure, boasting small rolling friction and long service life; 4.The transmission system incorporates a reduction box with braking function and an automatic positioning system, ensuring the crate guide rail of the rotating body stays horizontal with trolley guide rail and other guide rails of matched equipment after rotation stops; 5.The crate compaction system utilizes cylinder automatic and respective compaction. All the cylinders are made of alloy, avoiding many disadvantages such as inaccurate spring return of rotating crate cylinder, cylinder deformation and air leakage, etc; 6.The reduction box base is integrated into the rotary steam retort, successfully avoiding a series of problems resulting from concentricity change of transmission shaft brought by deformation of reduction box base and retort body; 7.The rotating speed is governed by frequency converter so that rotating speed can be adjusted anytime depending on product viscosity to avoid delamination and precipitate; 8.The whole sterilization process adopts PLC fully automatic linearity control. Via the PLC control, the temperature difference of thermal distribution is limited within �. The autoclave sterilizers allow for multi-stage heating, effectively saving energy. It also has an a dditional F value recorder (optional), capable of storing 100 scheduled processes.
Peanut roasting production line, multifunctional peanut roaster machine, drum nut roasting line.
Food processing machine.
Meat processing product slaughterhouse equipment of poultry/cattle/ sheep/pig, turnkey project service, refrigerator for cold storage..
Frozen processing marine products.
Which main used to hang and transfer sheep carcass for complete processing, main data as following: 1)-Rate voltage/Frequency/Phase: 380V/50HZ/3P 2)-Power: 2.2Kw 3)-Hanging carcass distance:1200mm 4)-Max capacity: 400 Heads per hour 5)-Component and material: Hot galvanized steel or stainless steel closed 8# C-beam track with rail hanger Hot galvanized steel or stainless steel die forged chain with pusher dog High polymer wear-resistant walking wheel 304 Stainless steel hook Driving&pneumatic tension device Frequency control 60*4mm 304 stainless steel tube rail (tube-rail) 40*40*4mm 304 stainless steel double rail (Dual-orbit)
Which main used to assist staffs convenient to skinning sheep hind legs,main data as following: 1)-Out size: 1600X1000X800mm (LXWXH) 2)-Component and material:
Which main used to hang and transfer sheep carcass for complete bleeding by automatic, main data as following: 1)-Rated voltage phase frequency: 380v 3p 50hz 2)-Power: 2.2Kw 3)-Hanger distance:1200mm 4)-Max capacity: 400 Heads per hour 5)-Component and material: Hot galvanized steel or stainless steel closed 8# C-beam track Hot galvanized steel or stainless steel die forged chain with fingers High polymer wear-resistant walking wheel Climbing track and downhill track Driving&pneumatic tension device Rotate device Frequency conversion control 60 4mm 304 stainless steel tube rail (tube-rail) 40 40 4mm 304 stainless steel double rail (Dual-orbit)
Which main used to Transport the sheep/goat head,hoof,white&red offal, condemned carcass from mezzanine floor to ground floor, main data as following: 1)-Out size: 350X2400mm(DXL) 2)-Thickness :2mm Material: stainless steel
