ESP Cable Solutions Co., Limited(ESPCS) is the most professional manufacturer for cable protectors, stable protection of ESP cable, control line and encapsulated bundles in the wellbore. ESPCS's cable protectors use channels to shield cables or lines as they transition across the coupling to prevent damage during installation or retrieval of completions. Our cable protectors uses a compressive fit design to accommodate oversize or undersize tubing per API spec and securely engage the cable or lines to the tubing. The advantage of our cable clamps as below:  - Electrophoretic Coating for superior corrosion/erosion resistance.  - Repairable and reusable.  - Custom designs can be developed.  - Matching pneumatic tool kits are available.  - Fast production capability, we can finish 5,000 pcs stamp type cable protector within 10 days, finish 10,000 pcs within 15 days, finish 20,000 pcs within 25 days. Other suppliers don't have this speed and capacity. The corresponding product model: -- 4.5" Cross Coupling Cable Protector / Mid-Joint Cable Protector
ESP Cable Solutions Co., Limited(ESPCS) is the most professional manufacturer for cable protectors, stable protection of ESP cable, control line and encapsulated bundles in the wellbore. ESPCS's cable protectors use channels to shield cables or lines as they transition across the coupling to prevent damage during installation or retrieval of completions. Our cable protectors uses a compressive fit design to accommodate oversize or undersize tubing per API spec and securely engage the cable or lines to the tubing. The advantage of our cable clamps as below:  - Electrophoretic Coating for superior corrosion/erosion resistance.  - Repairable and reusable.  - Custom designs can be developed.  - Matching pneumatic tool kits are available.  - Fast production cability, we can finish 5,000 pcs stamp type cable protector within 10 days, finish 10,000 pcs within 15 days, finish 20,000 pcs within 25 days. Other suppliers don't have this speed and capacity. The corresponding product model: -- 3-1/2" Cross Coupling Cable Clamps / Mid-Joint Cable Protector
0mm, 1150mm Wall panel width: 950mm, 1000mm, 1150mm Eps thickness: 30mm, 50mm, 75mm, 100mm, 150mm, 200mm Eps density: 6kgs/m³, 8kgs/m³, 10kgs/m³, 12kgs/m³, 15kgs/m³, 20kgs/m³ Steel thickness: 0.3mm, 0.35mm, 0.4mm, 0.45mm, 0.5mm, 0.6mm, 0.7mm Steel colors: white grey, blue, red, any other colors are available based on order quantity
Part number:0460-202-16141 Series:Solid contacts Material:Nickel Wire gauge:16, 18, 20 Keyed:No Contact size:16 Current rating:13 Holds pin/socket:Pin Size:16cm Weight:0.526g
Part number:0460-204-12141 Series:Solid contacts Material:Nickel Wire gauge:12, 14 Keyed:No Contact size:12 Current rating:25 Holds pin/socket:Pin
Material:Nickel Wire gauge:12, 14 Keyed:No Contact size:12 Current rating:25 Holds pin/socket:Socket
Part number:0462-201-1631 Series:Solid contacts Material:Gold Wire gauge:16, 18, 20 Keyed:No Contact size:16 Current rating:13 Holds pin/socket:Socket
End fitting for composite insulators include:socket ball, tongue clevis, oval-eye, cross arm, flange, pin, bolt, large spindle etc. The material could be forged steel, casting steel or as client's request. Wooden pallet or as request.
Infinity Precision-Machinery mainly cooperate with famous company at home and abroad, can machine all kinds of precising parts made from series of material, also can assembly. The products are mainly used in projecting and agricultural machines, oil field equipments,auto, Railway Equipment ,medical apparatus and so on.
With magnet material very low setup torque reasonable structure, small and light, stable operation, easily installed, high efficient. Technical data Item 50W-50KW Rated power 50W-50KW Rated voltage 12/24/48/96/110/220/380VDC Gear Box No (Direct Drive) Generator 3 Phase Permanent Magnet AC Generator Line to line voltage 0-500V.
With magnet material very low setup torque reasonable structure, small and light, stable operation, easily installed, high efficient. Technical data Item 50W-50KW Rated power 50W-50KW Rated voltage 12/24/48/96/110/220/380VDC Gear Box No (Direct Drive) Generator 3 Phase Permanent Magnet AC Generator Line to line voltage 0-500V.
RYseries non-resettable thermal fuses Rating current and voltage 5-15a 250v Tolerant voltage: above 1500 Rated functioning temp. Tf deg c:70-360;over 100 varieties Certification: pse ccc iso9001 Having applied for the national patent( above 240deg celsius) Small resistance, low central temperature Tolerance:-2 +2 Qty capacity:more than 1 million pcs per month Packing:polythene bags;cartons Product advantages The technological performance of products is high and the products have wide temperature specifications, especially the high temperature ones that could satisfy the requirements of the special consumers. The exported products implement the international authentication standard of japan pse and the products for domestic sale implement authentication standard of china ccc. The quality control of company are all inspected strictly from the purchasing products to all of the production procedure and the finished products leaving the plant. Japan powerful company pursues the best service for the consumers. Whatever quantity customers order every time, all product logos are printed the one-shot batch number. If necessary, mark "**special provision" for your company. Packing: polythene bags Cartons Carton: 12.5 cm*12.5 cm*7.5 cm Weight: 0.63 kg Qty:500 pcs.
The transformer core is made of imported high-quality cold-rolled silicon steel sheet, which greatly reduces no-load loss and no-load current. The core is tightly bound to ensure the compactness and reduce noise. *� The high and low voltage windings are� made of oxygen-free copper. The low voltage winding of 500KVA and below is of double-layer cylinder structure, of 630kVA and above adopt double helix or four helix structure. High-voltage winding adopts multi-layer cylinder structure. Dyn11 is used in the transformer connection group to reduce the influence of harmonics on the power grid and improve the quality of power supply. *� The transformer is a fully sealed structure, with three coats of primer and one coat of finish paint applied on the inner and outer surfaces. The product is salt fog proof, moisture proof and fungus-proofing, beautiful, durable and reliable The measured noise value is lower than the standard and maintenance free under normal operation.
1.Dry transformers with high and low voltage windings are coated by a thin layer of epoxy resin.It has the advantages of flame retardant, self-extinguishing, moisture-proof, heat dissipation and so on. 2.Equipped with a low-noise air-cooled device, the fan can be automatically controlled to start and close through the thermostat, so that the transformer can be operated with a 40% increase in capacity. 3.It can go deep into load centers, such as high-rise buildings, airports, wharfs, power plants, residential communities or complete sets of substations. 4.The temperature sensing element and the sensing system embedded in the low voltage winding can start and turn off the fan or alarm or trip according to the set value for protection.
100kva electrical power transformer price Ai Power offers three phases, oil immersed, and naturally cooled distribution and power transformers. Our products from 10kva to 20000kva with a maximum voltage 35kv are manufacture under the standard of IEC60076. The windings are made of high-grade electrolytic cooper and are concentrically positioned. Usually copper foil is used for the low voltage windings. Round shaped, enamel insulated wires is used for the high voltage windings.
S11 SERIES POWER TRANSFORMERS The capacity range of 10kV class S11 full seal power transformer is 30kva-2500kva. In 10kV, 50Hz power transmission and distribution system, it can be widely used in high-rise buildings, commercial centers, subways, airports, stations, industrial and mining enterprises, drilling platforms, especially in places with high fire protection requirements such as inflammables and explosives, and in places with poor environment. It can also be used for power and lighting in residential areas, commercial streets and rural areas. Advantages: S11 type fully sealed oil immersed transformer is the main type selection product of current distribution equipment, with remarkable energy saving effect. The S11 distribution transformer produced by our company uses 30p series high conductivity oriented silicon steel produced by well-known enterprises, and adopts new insulating materials and processes. The products are resistant to high temperature and impact. The integral mailbox composed of corrugated radiator is produced by phosphating and multi-layer antirust spraying technology, which has good weather resistance.
On the basis of the S9 series, the S11 series products have an average no-load loss of 20%. The no-load current is 70-85% lower than the S9. The temperature rise is reduced by 10K, and the service life is more than doubled. Even under the load of 20%. it can still be used for a long time. The running noise is reduced by 2-4 decibels. High and low voltage windings, body assembly, fuel tank structure, protection device, etc. are similar to S9 series transformers. It also adopts non-suspension structure, adopts vacuum drying, vacuum oil filtering and oil filling process, adopts corrugated oil tank, and has no oil storage cabinet and other structures.
Transformer can transformer the voltage of a network into the voltage matching the system or load and fulfill power transferring and distributing.Taking the place of transformers with silicon steel core, AMDT can be widely applied in outdoor power distribution networks systems, which is magnificently energy saving and can lessen air pollution. It is especially applicable for areas with insufficient power supply and fluctuating load and where daily maintenance is hard. Since the transformer adopts a fully sealed structure, the insulating oil and the insulating medium are not polluted by the atmosphere, so it can be carried out in a humid environment, making the ideal power distribution equipment in the urban and rural distribution networks.
1. Low energy consumption: The� adoption of isotropic soft magnetic material generates low magnetization power, high electrical resistivity and low eddy current consumption. The no-load loss and current of the core made of amorphous alloy are very low, only 1 / 3 of that of silicon steel sheet. 2. Strong corrosion resistance: the amorphous alloy core� is fully wrapped by resin and high temperature resistant silica glen� which� effectively prevent corrosion and falling off amorphous alloy fragments, and� provide better� protection for the core and coil. 3. Low noise. Improvement of� the structure of iron core and coil and� adoption� of special noise -reduction materials greatly reducing the operation noise. 4. Strong short-circuit resistance. This� product adopts three-phase five-column structure, and the iron core is protected by frame structure. Featured by low temperature-rise and strong heat dissipation, this� product� can work� by� 150% rated load under air cooling condition. Perfect temperature control protection system is applied� to provide reliable guarantee for safe operation of transformer
Dry-type transformer has the advantages of large short-circuit resistance, little� maintenance work, high operation efficiency, small dimension and� low noise,� which is commonly used in places with high requirements of� fireproof� and explosion-proof.� This type transformer is widely used in local lighting, high� buildings, airports, docks, CNC machinery and others. � Its cooling methods are divided into natural air cooling (AN) and forced air cooling (AF).� The transformer can operate continuously for a long time under rated capacity� under natural air cooling.� Output capacity of the� transformer can� increase by 50%� under forced air cooling.� It is suitable for intermittent overload operation or emergency overload operation. Due to the load loss and impedance voltage increase significantly when overload, it is not suitable for long time continuous overload operation.
