Wind turbine, wind generator, wind power generator, wind turbine blades.
Wind generator, generator, solar modules.
1.For vegetables: it can wash off the pesticide from vegetables and fruits, it can help to keep them fresh and clear out the smells. It can be used for vegetables, fruits and pickles. 2. It can clear away the hormone and additives from meats. 3. To disinfect the dishwares and milk bottles. 4. To disinfect and clear smells from refrigerators. 5. It can decompose the coal gas liquid gas leaked. 6. It can disinfect the underwears nappies and bed cloth. 7. It can prevent fungal infection to human bodies. 8. Cosmetic use, to wash face with ozone water can clear away the bacilli and dirty things from pores, to improve skins breath, to active the cells and to improve the circulation of blood. It can speedy up the metabolism and keep the face whiteness and morbidezza. 9. It can disinfect the sir in room and carpet, to prevent disease. It can clear the smokes dust and smells from the house. 10.It can decompose the poisonous gas left after the house was fitting up. 11. Can be used for washing clothes.
Parameter Blade diameter:2.6m Number of blades: 3 Blade material: fiber glass Rated wind speed: 8m/s Start wind speed: 3m/s Working wind speed: 3-25m/s Security wind speed: 40m/s Rated output power: 300w Max output power: 450w Rated speed: 400r/min Type of generator: permanent-magnets-3 phase a.C. Speed regulation: yaw& magnetic resistance output voltage : dc24v Tower type: pull wire tubular tower Normal tower height: 6m Weight of top section: 30kg Necessary battery: 12v 100ah 2 pieces Can supply power for ú¦color tvú¿below 29 inchú¬ú¼lightingú¼electric fan and charger. Packing no. N.W kgs G.W kgs Packing size L (cm) W (cm) H (cm) M3 1 50 62 135 40 31 0.1674 1 3 7 81 55 6 0.0267 3 30 30 200 6 6 0.0216 5 83 99 0.2157
Parameter Blade diameter:2.2m Number of blades: 3 Blades material: fiber glass Rated wind speed: 8m/s Start wind speed: 3m/s Working wind speed: 3-25m/s Security wind speed: 40m/s Rated output power: 200w Max output power: 350w Rated speed: 400r/min Type of generator: permanent-magnets-3 phase a.C. Speed regulation: yaw & magnetic resistance output voltage : dc24v, Tower type: pull wire tubular tower Normal tower height: 6m Weight of top section: 27kg Can supply power for ú¦lightingú¼electric fan and charge. Necessary battery: 12v 100ah 2 pieces Packing no. N.W kgs G.W kgs Packing size L (cm) W (cm) H (cm) M3 1 55 70 113 51 32 0.1844 3 30 30 200 6 6 0.0216 4 85 100 0.2060
Power 300W Diameter of wind wheel 2.6m Rated speed (rpm) 400 Rated wind speed 8m/s Rated power 300w Maximum power 450w Output voltage 24v Starting wind speed 3m/s Working wind speed 3-25(m/s) Security wind speed 40m/s Top quality except tower 30Kg height of tower 6m Tower size (diameter*thickness)mm í+60*3 Controller parameter 24V 40A Inverter Parameter DC24V í·userí»s local voltage & frequecy Suggested capacity of storage battery "12V100AH 2 pcs" plywood
Generator
Qingdao Wuxiao electric power substation framework is the steel framework for electric power transmission and transformation.We manufacture them with complicated technology and adopted sophisticated production line. Now we sell them widely all over the world. Availability size: Based on the customers requirements. Material:All the steel are used the noted Chinese steel plant products or based on the customer's specific requirements or product them according to our Chinese national standard. Color: Silver white or Based on the customers requirements. Package: wrapped with felt cloth or rubber mat and fix them by iron wire in case of collision or bump Terms of Payment: L/C,T/T Capacity: 40,000tons/year Delivery Time: one month or based on the customer's need Certification: We also supply Factory accept test,Warranty certification, Certificate of product quality, Certification of Quality Management System
Basic Parameters rated Power(kw) 15 Survival Wind Speed(m/s) 45 Max Power(kw) 16 Working Wind Speed(m/s) 1-25 Rated Voltage(v) 384/560 Rated Wind Speed(m/s) 9 Rated Rotation(r/min) 200 Blade Length(m) 4.30 Cut-in Wind Speed(m/s) 1 Blade Material FRP Cut-out Wind Speed(m/s) 25 Generator Life(year) 20 Some Key Technology Control Method Adjust speed method centrifuge variable pitch Brake Method electromagnetic Generator Generator Configuration 3-phase 380/220v 50/60hz Generator Type 3-phase permanent magnet Protect Class IP54
basic parameters rated power(kw) 30 survivel wind speed(m/s) 45 max power(kw) 32 wind wheel diameterm(m) 11.86 rated voltage(v) 384/560 blade length(m) 5.63 rated revolution(r/m) 150 swept area(m2) 99.53 cut-in speed(m/s) 1 blade material FRP cut-off wind speed(m/s) 25 generator life 25 sone key technology control method adjust speed method pneumatic pitch brake method mechanical generator generator configuration 3-phase 380/220v 50/60hz generator type 3-phase permanent magnet AC protect class IP54 blade technology resin is imported from american ashland,acuum slip casting, no bubble ,high strongth controller SIEMENS PLC pass ISO9001 and Europe CE
After ozone is dissolved in water, ozone water can quickly kill bacteria,fungus,escherichia coli,viruses and other microorganisms and it also can oxidize oganic matter completely with high oxidative capacity. it can achieve disinfection,sterilization,deodorization and prevention of infectious diseases spread by ozone oxidatio to swimming pool water,at the same time,ozone can oxidize iron,manganese and other metal ions in water and decompose micro organism of scattered ray in the water to improce water clarity and make water to show a beautiful blue color. the use of ozone treatment for swimming pool water is currently widely used in the world. ozone treatment could ensure the water quality to reach the international swimming federation standard and can not be replaced by other disinfection methods.
ANEVT(F) series high-precision bidirectional DC power supply adopts high-frequency PWM rectification and bidirectional DCDC conversion, FPGA digital control, seamless switching between forward and reverse, automatic bidirectional operation, energy feedback to the grid at full power; advanced digital control, ultra-high control accuracy, fast response, wide output voltage range; compared with conventional bidirectional power supply, it can achieve full range of high-precision output from 0V to full scale, up to 2000V, and the maximum power of a single machine can reach 1MW; abundant programming and testing functions, suitable for a variety of applications with different upper computer software. Applications: Testing of electric vehicle motors and controllers Testing of electric vehicle transmission system and powertrain system Testing of special electric vehicle motors, controllers, electric vehicle transmission systems, and powertrain systems Testing of fuel cell Testing of new energy motor system Testing of ship electric drive, electric drive system Testing of charger and charging pile Testing of battery pack charge/discharge Testing of capacitor and super capacitor charge/discharge Testing of energy storage system converter Testing of UPS and EPS system Testing of hybrid Simulated battery to replace real battery-powered test applications Power supply for high-power DC test
ANEVT(F) series dual-channel bidirectional DC power supply adopts high-frequency PWM rectification and bidirectional DCDC conversion, FPGA digital control, seamless switching between forward and reverse, automatic bidirectional operation, energy feedback to the grid at full power; advanced digital control, ultra-high control accuracy, fast response; two channels independently configured and not affect each other, which can be used in parallel to expand the DC output capacity and reduce investment by customer; abundant programming and testing functions, suitable for a variety of applications with different upper computer software. Features: Independent channel configuration: each channel is independently programmed, voltage, current and power parameters are set independently, and the operating parameters in programming mode are set independently. The channels are independent of each other and do not affect each other. Parallel channels: The two channels do not affect each other, and can be used in parallel. Grid feedback: both power supply and load characteristics, achieving the function of load for automatic energy feedback to the grid in addition to high-power DC power supply performance; energy saving, green and environment protection. High-precision output: accuracy of output voltage: �±0.05% F.S. Fast dynamic response: output voltage response time for 10%-90% sudden applied load and 90%-10% sudden shedding load: â?¤5ms; +90%~-90% forward/reverse switching time: â?¤10ms. Mainstream high-frequency PWM rectification control, power factor â?¥0.99, THD and injected harmonic current meet the requirements of GB/T14549-93, high-quality energy feedback to the grid. Advanced IGBT parallel technology, efficient and reliable. CC, CV, CP modes. Multi protection: input over-voltage/under-voltage, lack phase, output over voltage, IGBT overheat, IGBT over current, over temperature protection, short circuit current-limiting protection. Built-in EMI filter to filter the interference signal caused by the high-frequency switching process. Communication and remote control: standard CAN, RS232/RS485 port and remote control software of the upper computer. Programmable slow-rise output. Application: Testing of electric vehicle motors and controllers Testing of electric vehicle transmission system and powertrain system Testing of special electric vehicle motors, controllers, electric vehicle transmission systems, and powertrain systems Testing of fuel cell Testing of new energy motor system Testing of ship electric drive, electric drive system Testing of charger and charging pile Testing of battery pack charge/discharge Testing of capacitor and super capacitor charge/discharge Testing of energy storage system converter Testing of UPS and EPS system Testing of hybrid Simulated battery to replace real battery-powered test applications Power supply for high-power DC test
The ANEVH series is a programmable DC power supply that integrates DC power supply and feedback load, which can be used as a source and output power; or used as load to realize sink function, absorbing power and returning to the grid cleanly; standard dual-quadrant operation. Built-in voltage curves for DIN40839, ISO-16750-2 and ISO21848 standard automotive grids. Comprehensive OTP, OVP, OCP, OPP protection. S terminal compensation Application: Micro-grid and micro-inverter testing Automotive motor, controller and power battery testing Fuel cell test, fuel cell DCDC test UPS, on-board charger (OBC), charging spot, bidirectional DC-DC test Industrial testing for electrolysis, electroplating, welding, etc. Testing of communication power supply, LED product Testing of automotive electronics, avionics High power test, DC feedback load demand application
This AN8721PV3(F) series AC/DC power analyzer adopts STM32 controller as the core and supplemented by FPGA, using direct sampling and intelligent identification technology, widely used in electrical measurements of single-phase electrical equipment, such as voltage, current, power, power factor, frequency, electrical energy, time etc., wide range, 4-window LED highlight, simple operation, U disk read/write, serial communication, parameter alarm, voltage/current ratio settings and other functions, multi-purpose, accurate and durable. Features: AC/DC universal wide-range, DC ~ 4kHz bandwidth, load adaptability; Reliable, stable, compact, light; High measurement speed, up to 0.25s refresh rate; Voltage/current ratio setting, easy expansion; Voltage, current, power over-limit sound and light alarm, quick identification of abnormal products; Standard RS-232 or RS-485 serial port, MODBUS communication, test automation; Optional digital I/O, remote input and alarm signal output. Applications: Strict industrial site type test; High temperature aging room test; Home appliances, commercial appliances line standby power measurement; Power tools test; Lighting test.
AN87500(F) multi-channel power analyzer is specially designed for multi-channel AC/DC power measurement, suitable for power measurement of most electrical appliances, power supplies, motors, inverters and other products. The product takes the high-speed DSP processor as the core, adopts 16-bit high-speed high-performance AD direct sampling method for data acquisition, and can realize multi-channel simultaneous measurement, covering: voltage, current, power, peak voltage, peak current, power factor, crest factor, frequency, electric energy, current integral, efficiency, harmonic content and 3-phase electrical parameters, with serial communication (RS232/RS485, GPIB), remote control, alarm parameter preset and so on, supporting 1P2W/1P3W/3P3W/3V3A/3P4W and other wiring methods, meeting testing requirements of various power supply. Features: Multi-channel: 1~6 channels, flexible configuration of 1~6 single-phase, three-phase three-wire Ã?? 2, three-phase four-wire Ã?? 2, four-phase (DC+ three-phase three-wire) and other modes, satisfy test requirements of varies load (air conditioner, converter, inverter, motor); High accuracy: high-speed DSP processor, 16-bit high-speed high-accuracy AD converter, accuracy up to 0.1%, 100ms display cycle; Wide power range: current up to 50A for a single channel (optional 20A, 10A, 5A, 2A, 1A etc. or combination), minimum 0.lmW power resolution, satisfy test requirements of standby power consumption and rated power; Broadband: AC/DC signals, power measurement bandwidth: DC, 0.5Hz~100kHz, satisfy power test requirements of varies standard and non-standard sine wave load; Multi harmonic analysis: simultaneous 6-channel harmonic analysis, maximum 50th harmonic measurement, distortion analysis, visual display of total harmonic contents and total contents; Multi frequency measurement: simultaneous 6-channel frequency measurement; Line filtering: 500Hz/5.5kHz low-pass filter to measure the fundamental PWM waveform, filter out the high-frequency interference of the switching power supply current; Sensor: variable ratio, common I-I/V-V voltage/current transformers; I-V type current sensor with BNC interface, maximum input voltage 10V, optional high current sensor; Efficiency calculation: measure the input/output energy consumption of the equipment at the same time, and calculate its efficiency; Accumulation of electric energy: positive electric energy, reverse electric energy and integrated electric energy can be separately accumulated to measure the trading electric energy; Threshold alarm: independent 10 groups of voltage, current, power, power factor and other thresholds and measurement threshold for each channel, automatic upper/lower limit judgment and alarm; Chinese/English interface: Chinese or English operation and time/date display.
This AN87310(F) series AC/DC power analyzer adopts STM32 controller as the core and supplemented by FPGA, using direct sampling and intelligent identification technology, widely used in electrical measurements of single-phase electrical equipment, such as voltage, current, power, power factor, frequency, electrical energy, time, harmonics etc., wide range, 4-window LED highlight, simple operation, U disk read/write, serial communication, parameter alarm, voltage/current ratio settings and other functions, multi-purpose, professional and reliable. Features: Universal wide-range design for AC/DC, DC~100kHz bandwidth, stronger load adaptability Reliable, stable, compact, light Fast measurement, refresh rate up to 0.1s Standard RS-232 or RS-485 port, support MODBUS communication, automatic testing Application: Strict industrial site type test High temperature aging room test Power tool test Lighting test Standby power measurement of household appliances and commercial appliances lines Current: 1mA~22A/5mA~55A, voltage: 0.15~1200V, rated power and standby power can be measured Minimum power resolution: 0.1mW 50th harmonic and distortion analysis
The AN87330(F) series high-accuracy power analyzer adopts the latest FPGA+ARM digital processing system to achieve synchronous sampling, which fully meets the testing needs of three-phase equipment in the fields of motors, home appliances, new energy etc. on the market. It is specially designed for production links such as automated line and integrated system etc. Features: High performance, wide frequency band: accuracy up to 0.1%, the bandwidth is DC, 0.5Hz~100kHz, suitable for testing of non-sinusoidal wave load. True differential synchronous conditioning sampling, guaranteeing super large direct test capability, voltage: 0.15~1000V, current: 5mA~50A/1mA~20A. Optional motor torque and speed interface, suitable for testing of three-phase motor mechanical power and energy consumption. Standard RS232, LAN port, standard MODBUS protocol, to meet the customization needs of multiple protocols, optional RS485, GPIB module. Support three-phase interphase angle test. Applications: Dynamic test of brushless DC motor FG signal RMS, peak-peak measurement, duty cycle calculation, wave data analysis. Measurement of RMS and frequency of 3-phase back electromotive force. Phase angle test Power measurement of inverter motor and inverter Power bandwidth DC, 0.5Hz~100kHz Current: 0~20A/current sensor Simultaneously measure input and output power 50th harmonic and distortion analysis Testing of torque/speed of 3-phase motor Support the latest type of motor test module, reserved motor sensor test interface, suitable for signal test of most motor sensor on the market, 3-phase motor efficiency test by single machine, synchronized signal, improved test accuracy.
The AN97H series frequency conversion power supply adopts digital technology and IGBT intelligent output, pure output wave, with excellent technical performance. The power supply has an anti-shock circuit, suitable for various shock loads such as motors and air conditioners; excellent dynamic characteristics, strong load adaptation, high efficiency, simple operation, cost-efficient, suitable for industries such as export electrical appliances plants, laboratories, defense. Features: Over shock capacity: impact load of 1/3 capacity of power supply directly without soft start.; Adjustable voltage and frequency during output status; Measurement: voltage, current, frequency, active power; Level of voltage: 1.0~150.0V, 150.1~300.0V automatically adjusted or locked to 1.0~300.0V; Line voltage drop compensation Shortcuts groups, power-off memory, shortcuts key; Lock key, user-friendly design to prevent mis-operation; HD VFD display; Standard RS232 port, optional RS485 port or remote control port.
The AN77 series intelligent variable frequency power supply adopts digital technology and IGBT intelligent output, pure output wave. The power supply can output constant current AC wave, which can be used for short circuit. It outputs constant large current under the condition of small voltage, which can be used for detection of low-voltage power distribution devices such as air circuit breakers, contactors, and transformers, design and production of transformers and inductance devices. It is an ideal tester for device manufacturers, quality inspection institutes, and certification centers for applications with high current test conditions and low energy waste caused by the consumption of the load. Features: Low-voltage, high-current AC output to meet the test requirements of relevant regulations; Output frequency of 45~65Hz, suitable for the test requirements of different grids and devices; Adjust current and frequency in output state; Measurement: voltage, current, frequency, active power; Power-off memory and shortcut keys; Key lock, humanization design to prevent mis-operation; Standard RS232 port, optional RS485 port or remote control port. Custom of current source of any voltage level and current. Applications: Replace traditional voltage/current regulation, precise control, convenient operation
