1. WL-400B Automatic Cordless Rebar Tying Machine can do one hand operation, rebar bar could be tried quickly and safety 2. Simple and easy operation, work automatically 3. Powered by the rechargeable battery. 4. Tying could be completed by putting the jaw onto the crossed-rebar and pulling the trigger only. 5. Carrying plastic case supplied well protection.
1. WL-400B Automatic Cordless Rebar Tying Machine can do one hand operation, rebar bar could be tried quickly and safety 2. Simple and easy operation, work automatically 3. Powered by the rechargeable battery. 4. Tying could be completed by putting the jaw onto the crossed-rebar and pulling the trigger only. 5. Carrying plastic case supplied well protection.
1. Introduction: This machine is used for making square paper tube. It is comprised of paper reel stand, bottom ply lubricating stand, surface ply glue applying stand, main glue applying stand, spiral winding unit, inline cutting unit and tube discharging unit. Two mandrels will be delivered with machine. This machine owns below features: Japan Mitsubishi PLC, touching panel, servo motor. Japan THK brand high-speed threaded rod Synchronous-tracking cutting saw, equipped with dust collector Stainless steel glue tank and stainless steel glue scraper Use special device to change the angle of winding part instead of moving glue stand and paper stand. 2. Main specification: Model: SANSPT-PLC05 Tube inner side length: 50mm-150mm Tube wall thickness: 3-5mm Paper plies: 8 plies (adjustable depends on thickness of paper ply and tube) Machinery speed: 5-10m/min (dependson tube size, material quality, operator skill) In-line cutting length: Adjustable 1000-4000mm, tube length controlled by Japan Mitsubishi PLC In-line cutting tolerance: ±1.5mm Cutting method: Automatically cut with single circular saw Glue method: Double surface gluing Speed regulation: Frequency controlled by Japan Mitsubishi Inverter Power: 11KW/380V/50HZ/3 phases Weight: ~2500kgs Dimension: 4200mmX1500mmX1500mm
1.Introduction: This machine is used for gluing label on paper tube with hot melt glue,and no need to change any parts for labeling different diameter tubes. The machine owns below features: Full-applying glue on label or two sides-applying glue on label. Automatic temperature control system. Suitable for paper can,glass bottle,plastic bottle,metal container. 2.Main specification: Model: SAN-HMGL01 Can diameter: 30-160mm Can height: 100-400mm Speed: 800-1100 pcs/hr Tolerance:±0.5mm Power: 2.1KW/380V/50Hz/3 phases Air pressure: 0.5Mpa Operator: 1 person Weight: 260kgs Dimension: 810mm*900mm*1300mm
Automatic steel strip machine 2012 porketm(export models) 1.Comprehensive upgrade of the software and hardware on the basis of the sf-b 2. Its actual discharging speed is up to 4-5m/min. 3. Run a new control system porket2012, more stable, efficient, simple and systemic self-diagnostic function can protect the equipment from damage to the maximum. 4. Improvement of die processing precision completely avoids the workpiece wounding and prolongs the service life of the die. Nailless & non-fumigation wooden box
Sf-d2: automatic double- steel strip machine 2012 porketm(export models) 1. Run a new control system porket2012, more stable, efficient, simple and systemic self-diagnostic function can protect the equipment from damage to the maximum. 2. The improvement of die processing precision and the burrs binding all toward the inside avoid the wounding and prolong the service life of the die. 3. Its actual discharging speed is up to 8-10m/min. 4. Equipped with protection device, it ensures the safety of personnel to the maximum and avoids debris falling into the equipment. 5. Mold materials more durable, hydraulic system adopting imported components and its operation is more stable. Nailless & non-fumigation wooden box
Steel strip machine Through auto cad software. It draws and calculates the data of steel tape which will be produced according to the specification what we need and then inputs in plc through the touch screen.And plc controls automatic production with few specification and large quantity. The prodection efficiency is 3-4m/min Nailless & non-fumigation wooden box
Steel strip machine 2008 porketm 1. Equipped with the most advanced ipc, its operation is effective and stable, which is your long-term guarantee of secure use. 2. Supplemented with the equipment operating software system porkettm( which can be directly used to windows xp operating system) of independent research and development and independent intellectual property. 3. Through the porkettm program it solves the problem of tooth-row, simplifies the mechanical structure and reduces the rate of failure without addition of mechanical interpolation-tooth. 4. Inputting the necessary data of length, width, and height only in the porkettm, the customers can make the machine generate the cad strip graphics, import equipment plc and run automatically without the need of mastering complex auto cad drawing software and manuals drawing and input. 5. At the same time we can arrange one day, one week or longer production plan to meet the demands of producing many kinds of steel strips continuously and make no waste generated. 6. It can build customer data files and store unlimited data. At the same time, different products can be manufactured, each of them can be retrieved by click. 7. In the process of implementation of production plan, the list can be arbitrarily added, deleted, modified and arranged. You can edit in the office, control the operation of plant machinery equipment which can save a lot of labor and time and provide remote technical support. Nailless & non-fumigation wooden box
Automatic double steel strip machine 1. Based on type b, it can produce double strip in the meantime at 8-10m/min. 2. By increasing the wheel, the length of the equipment is prolonged, and steel tap produced more straight . 3. The mold stamping burrs are all bound inside to avoid incision wounding to the maximum. 4. We adopt the imported materials with surface treatment coating to prolong life of dies to the maximum and avoid regular maintenance and replacement. 5. Completely safety system, automatic turn off of machine when the door opens avoid persinnel injures. Nailless & non-fumigation wooden box
Name: ZL-2000 Gable Top Carton Filling Machine Code: ZL-2000 Description: The whole process is automatically computer program controlled. It only takes one person. It can be used in filling milk, butter, thin fermented yoghurt, lactobacillus drink, fresh fruit juice, etc. Technical parameters: 1 Capacity: 250, 500, 750, 1000ml. 2 Output per hour: 2000 boxes / (500ml). 3 Material: Type A milk carton paper (card board, bottom size 70mm by 70mm ). 4 Cover No cover. 5 Filling temperature: 5-50degrees. 6 Guarantee period: Pure milk, fermented yoghurt:7-21 days (2-6 degrees to keep). Acidity juice: 30-60 days (2-6 degrees to keep). Non dairy whip toppings: 12 months (- 18 degrees Celsius). 7 Power: 18KW. 8 Compressed air pressure: 1.0-1.4 Mpa. Flow: 1.4-2M3 / min. No oil, no dust and no water. 9 Cold water: flow no less than 40L/min, tempreture no more than 15 degrees Celsius. 10 Dimension: 3.2 m * 1.2m*2.8m. 11Weight: 3000KG. 12 Installation requirements: cement tile, ground tile and plastic floor tile. Dimension: 3.2 m * 1.2m*2.8m, Weight: 3000KG.
Product name: Computerized Pillow Machine Specification: Item no.: QL003-PF Dimension: 5000*5000*1400mm Equipment: Fiber opener 1pcs; Fan 1pcs; Filling lot 2set; PLC control system 1pcs Voltage: 380v 50Hz 3phase Power: 8.45kw PLC: Siemens Brand Labor: 2 persons Capacity: 150-180kg/h; 6-8pcs/min. Fiber opening rate: more than 98% and not be damaged Weight: 690kg Description: Qingdao Lion Computerized Pillow Machine item no. QL003-PF is one of the latest developed machines according to our customerÆs requirement and experience during using our machine. It is adjusted by PLC computer system that the whole line can be handled by only 2 operators, one of them is mainly working for raw material feeding and another one works for the 2 fillings that adjusted by control panel. It requires conjugated hollow siliconized polyester fiber that shorter than 100mm. normally there are 30% material can be mixed with non-siliconized fiber waste or wool etc. NOTE: The user should ask for confirmation from the seller before change the fillings. The filling time can be adjusted from the PLC control panel according to the different production size and filling quantity for each pillow case from each filling slot separately. Different requirement can be considered to work on our equipment to be suitable to the customer.
Production name: Down and feather filling machine Specification: Item no.: QL002-MT Layout dimension: 6000*2500*3600mm Equipment: Raw material box with paddle; Mixer with vacuum feeding system; Blower; Filling table 1nozzle Voltage: 480v 60Hz 3phase Power: 9.5kw PLC: Siemens Material: DowníBfeather Hopper capacity: 10-15kg Air pressure: 0.6-0.8Mpa Capacity: Min.60-80kg/h Operator: 1 person Weight: Min. 1.1 ton Description: 1) The down and feather filling machine can be used for filling pillows, cushions and comforter. And the filling material could be down, feather and micro fiber. 2) QL002-MT is assembled with a raw material storage, material mixer, material transporter, filling device, electronic scale (weighing device) and recycle dust collection system. 3) The whole line is controlled by Siemens PLC control system that can be handled by only 1 operator. 4) First of all put the raw down material into the raw material storage where there is one blender, the blender drives the material running, so the material can be easily sucked into the mixer. 5) There are 2 sections inside of the mixer that can hold about 10 to 15kg material once a time. The alarm system will make a warning sound as soon as the material is not enough (Controlled by a photoswitch). Then Choose raw material feeding from the control screen, the material will be transported to the mixer automatically. 6) The top section of the mixer holds the raw material and feeds the material to the bottom section by the sense of the density sensor. 7) There is a blending device in each section of the mixer to keep material moving continuously. 8) First of all, set up the testing time from the control screen--testing mode like 5 seconds and get to know how much material can be filled within 5 seconds from the scale. 9) The PLC will make record automatically after few times of testing. 10) Calculate how much time you need to fill one particular weight and set up the time from the control screen and then start producing. 11) The filling material waste will be sucked and carried back to the mixer automatically through the recycle dust collection system, so that your operation environments will be clean.
Specification: Item no.: QL1000-BF-2 Layout Dimension: 15000*6000*3600mm Equipment: Bale opener--3-way blower--Feeding hopper*2--Ball fiber machine*2--Blower*2--Mixer--Operation table Voltage: 480v 60Hz 3phase Power: 45.75kw PLC: Simens Material: Conjugate hollow siliconized polyester fiber 7D/15D * 51/64mm Air pressure: 0.6-0.8Mpa Capacity: Min.160-240kg/h Operator: 1 person Weight: Min. 5.5ton Description: The whole line is assembled with an automatic bale opener which is developed recently; Fiber blower 3 way device; 2 sets of ball fiber machine; a fiber storage and automatic filling table. The 2 sets of ball fiber machine is running all the same time to achieve enough capacity. Put a whole bale raw material of fiber into the bale opener which will be transported to the ball fiber machines separately and automatically controlled by PLC control system. The whole line can be handled by only one operator working at the filling tables. First of all set up the producing time from the control screen according to the ball fiber size required; note that the longer time the smaller size. The second sent up the filling time from the control screen according to the production filling quantity after testing, such like pillow 50*70cm with 600g and the filling time can be around 10second and so on. There are 2 operation functions in the control program which is adjustable filling time set up and filling time controlled by foot switch manually.
Specification: Item no.: QL005-OP Equipment: Bale opener, Fiber opener 1pcs, Blower 1pcs, Filling slot 2pcs Layout dimension: 13000*5000*2500mm Power: 13.75kw Voltage: 380v 50Hz 3phase(difference can be ordered) Labor: 1person Capacity: min. 300kg/h Weight: 3500kg Control system: PLC control system Description: Automatic fibre filling machine QL005-OP is mainly used to fill the opened fibre into a bag that can be ready to sell to other customers requires small quantity daily time. The machine can be arranged for non-airing bag such like plastic bag, also airing bag such like plastic woven bag. PLC control system that can be handled by only 1 person that working at the filling device as the whole bale raw material can be already contained and transported to the opener by the bale opener automatically. The filling time can be already set up from the control screen according to the weight and bag size. Double hand control system saves labour well. All electricity key parts are adopted by the most famous world brand such like Siemens and Omron that is stable quality and has international service department in your local area. The machine is running calmly because of the well dynamic balance processing. Please contact us for a video slip to get more idea about our machine. MDF board
Automatic horizontal packing machine for packaging instant noodle, biscuits, soap, medicine Model number:qnf450 Applications: Suitable for packing instant noodles, biscuits, medicine, soaps, tissues, ice creams, chocolates, instant frozen-foods, machine parts and daily necessities Capacity: 50 to 200 packs/minute
Blister package Good quality We have many kinds of products.
YHA Automatic Pillow Type Packaging Machine Applications: Suitable for packing instant noodles, chocolate,ú¼biscuits, soaps, snow-biscuits, frozen foods and solid matter, etc. Features: Design of machine is reasonable, which makes the operation easy and convenient. Function of automatic stop at fixed position Function of digital indicator which shows the size of the film, packing speed , capacity and temperature , etc. PLC to be adopted reduces the mechanical contact and makes the system more stable ,reliable and easier to maintenance The inverter is convenient and simple to adjust the motor speed. The photo sensor is used to test marks, and control the double -tracing without contact. Fittings: Printer; Air Switch PLC----OMRON (Japan) Photo Switch----OMRON (Japan) BANNER (America) Converter----PANASONIC (Japan) Switch (earth leakage protection) ----FUJI Solid-state Relay----XUANRONG (TAIWAN) Button Switch: KUN HUAN (South Korea) Main Technical Data Specifications YHA450/99 YHA450/99-2 YHA450/120 YHA450/150 YHA590/120 YHA590/150 YHA590/180 Film width (max.)(mm) 450 450 450 450 590 590 590 Packing dimension ( mm) Lú¦90-400 W:10-130 H:5-40 L:45-210 W:10-130 H:5-40 L:90-400 W:10-130 H:15-60 L:90-400 W:10-130 H:30-90 L:90-400 W:30-180 H:15-60 L:90-400 W:30-180 H:30-90 L:90-400 W:30-180 H:40-120 Packing speed(Bags/min.) 50-180 60-120 50-150 50-150 50-150 50-150 50-150 Machine size(mm) 5000*965*1750 5000*1100*1750 Machine weight(kg) 1000 1200
We manufacturing paper plate dimension from regular 6'' to 10'', more dimensions could be customized; paper material from regular white cardboard to food standard; we can do single color printing we can do CMYK and multi-color printing we can do oiling and film lamination and beautiful golden hot stamp
This machine is used for the printing and glazing of various wood stripes, designs and patterns on PVC door, wall-skirting board and wooden board. The factory offers quality products, attractive prices and consideratc after-sale services. Special designs are accepted and customer are welcomed to visit the factory.
Speed Range IPH 3000-10000 Sheet Size (max.) mm 640x483 Sheet Size (min.) mm 250x210 Plate Size mm 533x645 Sheet Thickness (max.) mm 0.60 Sheet Thickness (min.) mm 0.04 Printing Area (max.) mm 635x 470 Plate Thickness (max.) mm 0.42 Blanket Size mm 650x585 Blanket Thickness (max.) mm 1.90 Feeder Capacity mm 800 Delivery Capacity mm 500 Gripper Bite mm 5-8 Gripper Margin mm 9 Power Requirement KW 9 LXWXH(H) mm 3010 x2460 x1800 Weight Kg 4450. 3500*1682*2190mm Gross weight 4242kg Net weight 3700kg.
